-
Notifications
You must be signed in to change notification settings - Fork 119
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
generation of the file .hex #206
Comments
What error? |
Sketch uses 1646 bytes (0%) of program storage space. Maximum is 253952 bytes. Compilation error: exit status 1 |
Open the IDE settings turn on Verbose compilation and post the entire output along with the code you're trying to compile. There is also some information here: |
FQBN: MegaCore:avr:2560:BOD=disabled,LTO=Os_flto,bootloader=original_mega_2560 Detecting libraries used... "C:\Users\DanierCondeFranco\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-size" -A "C:\Users\DanierCondeFranco\AppData\Local\Temp\arduino\sketches\D69421F1BD6C3FAADDBCBE5A16D05ACF/Blink.ino.elf" Compilation error: exit status 1 |
It seems like the IDE doesn't have access to execute one or more scripts. What happens if you try to run the IDE as administrator in Windows? @per1234 may know what the root cause is. |
I can load the blink example without problem using the Mega-core - atmega2560 . but when generating the .hex file “Export Compiled Binary” the problem is generated. |
Again, Arduino IDE doesn't have permission to run the scripts associated with exporting the compiled output and moving it into the sketch folder. I can't tell why this is; probably a limitation Windows puts on your account. However, if you just want to get the hex file, you can quite easily look at the compiler output and figure out where the hex file is located.
|
I'm wondering if the problem is the unexpanded
I see that also in the output from running an "Export Compiled Binary" operation with a MegaCore board selected. In my case it doesn't produce an error. What it does do is copy the Maybe the reason why that generates an error for @Dancofra is that the folder where the command attempts to write this file has some security restrictions. I guess there was a regression at some point in the platform system that causes the |
Thanks for your prompt responses. I will take the .hex file from the folder “C:\Users\DanierCondeFranco\AppData\Local\Temp\arduino\sketches\D69421F1BD6C3FAADDBCBE5A16D05ACF”
Thanks for your prompt responses. I will take the .hex file from the folder “C:\Users\DanierCondeFranco\AppData\Local\Temp\arduino\sketches\D69421F1BD6C3FAADDBCBE5A16D05ACF” |
I have now submitted a formal report about this bug: On investigation, I found it was not as straightforward as a simple regression. I found that the support for the Since the addition of the support for the hook in Arduino CLI 0.32.0/Arduino IDE 2.1.0, the command is executed but Arduino CLI still doesn't generate the |
arduino/arduino-cli#2340 has been closed by PR arduino/arduino-cli#2372. |
Excellent work, I think the generation of the file is not working. hex, all this is done from the Arduino id and throws the following error:
The text was updated successfully, but these errors were encountered: