Skip to content

Latest commit

 

History

History
40 lines (20 loc) · 1.52 KB

README.md

File metadata and controls

40 lines (20 loc) · 1.52 KB
Raw

Open-source Shiftlight

vid

An opensource shiftlight project using Arduino and Neopixel products

In this repository you will find;

  • The .ino file that you can upload directly to your Arduino
  • A .png image of the wiring diagram
  • A .jpeg image of how the finished assembly should look
  • An .stl file for a housing for the shift light (Suits Daihatsu, but can be modified)
  • An .stl file for a housing for the Arduino
  • An .md file containing a detailed parts list.

Currently the easiest DIY shiftlight on the world wide web, you're welcome ;)

b73128e0c34c0271b41c925a6889e2ce635afe49

02e61ff9bd5349ea1deae73b9c1757d51cc9f0a8

Please note, there is a mistake in this schematic. A corrected schematic is shown in issue #4

72bc0fe16fb227eac94da071f4eaca564dbe03f3

77c8a71d32cf7a6d5637833e3bfcc7f0d2fdef7a

Notes:

  • This example uses a voltage divider and transistor to pull down the the tacho signal from 12v,

if your car uses a 5v tacho signal this is not needed.

  • You will need to download and install the adafruit neopixel library for IDE