Print_Settings.md

Hemera Odyssey Print Settings

#hemeraodyssey

• Use PETG for all part
• Part are already correctly orientated to take best advantage of stock part cooling, do not change the orientation
• Use exactly 4 perimeters @ (Prusa Slic3r default) 0.45mm width, change other slicers to this.
• Use 0.2mm layer height
• Use at least 20% rectangular infill
• Supports and brims are not required

Some parts are for specific configuration: -

• MK3S & MK2.5S Only HemeraOdyssey-Z_Top_Left_7mm_MK3S.stl
• MK3S & MK2.5S Only HemeraOdyssey-Z_Top_Left_7mm_MK3S.stl

Some parts need to be printed by them selfs: -

• Solo print HemeraOdyssey-Part_Left_Motor.stl
• Solo print HemeraOdyssey-Part_Right_Idler.stl
• Solo print HemeraOdyssey-X_Carriage.stl
• Solo print HemeraOdyssey-X_Carriage_Washer.stl
• Solo print HemeraOdyssey-Idler_Housing_Prusa_20T_3mmID_Spacer_Top.stl
• Solo print HemeraOdyssey-Idler_Housing_Prusa_20T_3mmID_Spacer_Bottom.stl
• Solo print HemeraOdyssey-Nozzle_Fang.stl