Skip to content

Latest commit

 

History

History
64 lines (48 loc) · 2.68 KB

UPGRADING.md

File metadata and controls

64 lines (48 loc) · 2.68 KB
Raw

Manual Intervention For Upgrades

Not all of Plebian's stuff is packages in a way where apt can upgrade it as of the time of writing. That's why occasionally, manual intervention is needed to fully transition from an earlier release of Plebian to a newer one. This document tells you how to do this depending on what release you're updating from.

If you're in need of doing multiple upgrades, do them in order.

From 2023.01.* to 2023.02.28

During this upgrade, u-boot will need to be updated. The third party repository needs to be added as well.

Upgrading u-boot

  1. Find the latest release for your device from the Actions workflow.
  2. Unzip it so that you have idbloader.img and u-boot.itb
  3. Find the device you have u-boot on with lsblk, it's probably the one your / resides on as well, i.e. /dev/mmcblk0 for SD and /dev/mmcblk1 for eMMC.
  4. Flash idbloader.img to p1 of that device, e.g. sudo dd if=idbloader.img of=/dev/mmcblk0p1 oflag=dsync bs=4096 Remember to change /dev/mmcblk0p1 to /dev/mmcblk1p1 if you're using eMMC.
  5. Flash u-boot.itb to p2 of that device, e.g. sudo dd if=u-boot.itb of=/dev/mmcblk0p2 oflag=dsync bs=4096 Remember to change /dev/mmcblk0p2 to /dev/mmcblk1p2 if you're using eMMC.

Adding The Plebian Repo

Run the following:

sudo curl -L https://raw.githubusercontent.com/Plebian-Linux/quartz64-images/main/debos-recipes/overlays/apt/sources.list.d/plebian.sources -o /etc/apt/sources.list.d/plebian.sources
sudo curl -L https://github.com/Plebian-Linux/quartz64-images/raw/main/debos-recipes/overlays/keyrings/plebian-build-key.gpg -o /usr/share/keyrings/plebian-build-key.gpg
sudo apt update
sudo apt install devicetrees-plebian-quartz64

From 2023.02.28 to 2023.03.09

  1. Install the package firmware-brcm80211.
  2. Remove the file /etc/apt/apt.conf.d/40default-release
  3. Remove the file /etc/apt/sources.list.d/sid.list

To 2023.07.19

During this upgrade, u-boot will need to be updated.

  1. Download the u-boot build for your device from the release page.
  2. Find the device you have u-boot on with lsblk, it's probably the one your / resides on as well, i.e. /dev/mmcblk0 for SD and /dev/mmcblk1 for eMMC. We'll henceforth refer to this as /dev/mmcblkX.
  3. Install parted: sudo apt update && sudo apt install parted
  4. Delete partition 2 of the device: sudo parted /dev/mmcblkX rm 2
  5. Resize partition 1 of the device: sudo parted /dev/mmcblkX resizepart 1 32MiB
  6. Flash u-boot to partition 1 of your device: sudo dd if=u-boot-rockchip.bin of=/dev/mmcblkXp1 oflag=dsync status=progress bs=1M