komfovent.yaml

modbus:

  name: "Komfovent"
  type: tcp
  host: 192.168.7.32
  port: 502

  switches:
    - name: "Komfovent Switch Power"
      # slave: 1
      address: 0
      command_on: 1
      command_off: 0  
      verify:
    - name: "Komfovent Switch Eco"
      # slave: 1
      address: 2
      command_on: 1
      command_off: 0
      verify:
    - name: "Komfovent Switch Auto"
      address: 3
      command_on: 1
      command_off: 0
      verify:
    # Logic
    # Away,Intensive or Boost off, switch to Normal
    # Switch Normal Off go to Away
    - name: "Komfovent Switch Away"
      # slave: 2
      address: 4
      command_on: 1
      command_off: 2
      verify:
    - name: "Komfovent Switch Normal"
      # slave: 2
      address: 4
      command_on: 2
      command_off: 1
      verify:
    - name: "Komfovent Switch Intensive"
      # slave: 2
      address: 4
      command_on: 3
      command_off: 2
      verify:
    - name: "Komfovent Switch Boost"
      # slave: 2
      address: 4
      command_on: 4
      command_off: 2
      verify:
      
    - name: "Komfovent Switch Normal Heater"
      # slave: 1
      address: 110
      command_on: 1
      command_off: 0  
      verify:

    - name: "Komfovent Switch Eco Free Cooling Heating"
      # slave: 1
      address: 201
      command_on: 1
      command_off: 0  
      verify:
    - name: "Komfovent Switch Eco Heater Blocking"
      # slave: 1
      address: 202
      command_on: 1
      command_off: 0  
      verify:
    - name: "Komfovent Switch Eco Cooler Blocking"
      # slave: 1
      address: 203
      command_on: 1
      command_off: 0  
      verify:
    - name: "Komfovent Switch Eco Constant Heat Recovery"
      # slave: 1
      address: 216
      command_on: 1
      command_off: 0  
      verify:

  sensors:
    - name: "Komfovent on off num"
      address: 0
      input_type: holding
      data_type: uint16
      scan_interval: 5
      # unique_id: kom_s_power
    - name: "Komfovent Eco num"
      address: 2
      input_type: holding
      data_type: uint16
      # unique_id: kom_s_eco
    - name: "Komfovent Auto num"
      address: 3
      input_type: holding
      data_type: uint16
      # unique_id: kom_s_auto
    - name: "Komfovent Mode num"
      address: 4
      input_type: holding
      data_type: uint16
      scan_interval: 5
      # unique_id: kom_s_mode
    - name: "Komfovent Scheduler num"
      address: 5
      input_type: holding
      data_type: uint16
    - name: "Komfovent Temp Control num"
      address: 10
      input_type: holding
      data_type: uint16
    - name: "Komfovent Flow Control num"
      address: 11
      input_type: holding
      data_type: uint16
    - name: "Komfovent Control Indoor Humidity %"
      address: 40
      input_type: holding
      data_type: int16
      unit_of_measurement: '%'
      scan_interval: 30
    - name: "Komfovent Status Normal Fan Supply Setpoint"
      address: 105
      input_type: holding
      data_type: uint32
      unit_of_measurement: '%'
      # device_class: temperature
      state_class: measurement
      scan_interval: 5
    - name: "Komfovent Status Normal Fan Extract Setpoint"
      address: 107
      input_type: holding
      data_type: uint32
      unit_of_measurement: '%'
      # device_class: temperature
      state_class: measurement
      scan_interval: 5
    - name: "Komfovent Status Normal Setpoint C"
      address: 109
      input_type: holding
      data_type: int16
      unit_of_measurement: °C
      scale: 0.1
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 5

    - name: "Komfovent Eco Min Supply temperature C"
      address: 199
      input_type: holding
      data_type: int16
      unit_of_measurement: °C
      scale: 0.1
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 5
    - name: "Komfovent Eco Max Supply temperature C"
      address: 200
      input_type: holding
      data_type: int16
      unit_of_measurement: °C
      scale: 0.1
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 5
    - name: "Komfovent Eco Free Heating/Cooling Status Num"
      address: 201
      input_type: holding
      data_type: uint16
      scan_interval: 5
    - name: "Komfovent Eco Heating Enabled Status Num"
      address: 202
      input_type: holding
      data_type: uint16
      scan_interval: 5
    - name: "Komfovent Eco Cooling Enabled Status Num"
      address: 203
      input_type: holding
      data_type: uint16
      scan_interval: 5
    - name: "Komfovent Eco Constant HR Enabled Status Num"
      address: 216
      input_type: holding
      data_type: uint16
      scan_interval: 5

    - name: "Komfovent Supply temperature 'C"
      address: 901
      input_type: holding
      data_type: int16
      unit_of_measurement: °C
      scale: 0.1
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 10
      # unique_id: kom_m_sup_temp
    - name: "Komfovent Extract temperature 'C"
      address: 902
      input_type: holding
      data_type: int16
      scale: 0.1
      unit_of_measurement: °C
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 10
      # unique_id: kom_m_extract_temp
    - name: "Komfovent Outdoor temperature 'C"
      address: 903
      input_type: holding
      data_type: int16
      scale: 0.1
      unit_of_measurement: °C
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Supply Flow volume"
      address: 905
      count: 2            
      data_type: uint32
      input_type: holding
      precision: 0
      unit_of_measurement: 'm³/h'
      scan_interval: 10
    - name: "Komfovent Extract Flow volume"
      address: 907
      count: 2          
      data_type: uint32
      input_type: holding
      precision: 0
      unit_of_measurement: 'm³/h'
      scan_interval: 10
    - name: "Komfovent Supply Fan Intensivity '%"
      address: 909
      data_type: uint16
      input_type: holding
      scale: 0.1
      precision: 1
      unit_of_measurement: '%'
      state_class: measurement
      scan_interval: 30
    - name: "Komfovent Extract Fan Intensivity '%"
      address: 910
      data_type: uint16
      input_type: holding
      scale: 0.1
      precision: 1
      unit_of_measurement: '%'
      state_class: measurement
      scan_interval: 30
    - name: "Komfovent Electric Heater %"
      address: 912
      data_type: uint16
      input_type: holding
      scale: 0.1
      precision: 1
      unit_of_measurement: '%'
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Filter Impurity, %"
      address: 916
      data_type: uint16
      input_type: holding        
      unit_of_measurement: '%'
      state_class: measurement
      scan_interval: 60
    # - name: "Komfovent Supply Pressure"
    #   address: 918
    #   data_type: uint16
    #   input_type: holding
    #   unit_of_measurement: Pa
    #   state_class: measurement
    #   scan_interval: 10
    - name: "Komfovent Status"
      address: 899
      data_type: uint16
      input_type: holding
      scan_interval: 5
    - name: "Komfovent Power consumption, W"
      address: 920
      data_type: uint16
      input_type: holding
      unit_of_measurement: W
      device_class: power
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Heater Power, W"
      address: 921
      data_type: uint16
      input_type: holding 
      unit_of_measurement: W
      device_class: power
      state_class: measurement
      scan_interval: 30
    - name: "Komfovent Heat Recovery, W"
      address: 922
      data_type: uint16
      input_type: holding 
      unit_of_measurement: W
      device_class: power
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Heat exchanger efficiency, %"
      address: 923
      data_type: uint16
      input_type: holding
      unit_of_measurement: '%'
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Energy saving, %"
      address: 924
      data_type: uint16
      input_type: holding
      unit_of_measurement: '%'
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Specific power (SPI)"
      address: 925
      data_type: uint16
      input_type: holding 
      scale: 0.001
      precision: 2
      unit_of_measurement: W/(m3/h)
      state_class: measurement
      scan_interval: 10
#Consumption
    - name: "Komfovent AHU Consumption Day, kWh"
      address: 926
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent AHU Consumption Month, kWh"
      address: 928
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent AHU Consumption Total, kWh"
      address: 930
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Heater Consumption Day, kWh"
      address: 932
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Heater Consumption Month, kWh"
      address: 934
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Heater Consumption Total, kWh"
      address: 936
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Heating Recovery Day, kWh"
      address: 938
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Heating Recovery Month, kWh"
      address: 940
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Heating Recovery Total, kWh"
      address: 942
      data_type: uint32
      input_type: holding
      count: 2
      precision: 2
      scale: 0.001        
      unit_of_measurement: kWh
      device_class: energy
      state_class: total_increasing
      scan_interval: 30
    - name: "Komfovent Status Panel Temperature"
      address: 945
      input_type: holding
      data_type: int16
      scale: 0.1
      unit_of_measurement: °C
      precision: 1
      device_class: temperature
      state_class: measurement
      scan_interval: 10
    - name: "Komfovent Status Panel Humidity"
      address: 946
      input_type: holding
      data_type: int16
      unit_of_measurement: '%'
      device_class: humidity
      state_class: measurement
      scan_interval: 10

sensor:
  - platform: template
    sensors:
      komfovent_on_off:
        friendly_name: "Komfovent On Off"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_on_off_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_eco_mode:
        friendly_name: "Komfovent Eco Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_eco_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_auto_mode:
        friendly_name: "Komfovent Auto Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_auto_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_operation_mode:
        friendly_name: "Komfovent Operation Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Standby',
              '1' : 'Away',
              '2' : 'Normal',
              '3' : 'Intensive',
              '4' : 'Boost',
              '5' : 'Kitchen',
              '6' : 'Fireplace',
              '7' : 'Overide',
              '8' : 'Holiday',
              '9' : 'Air Quality',
              '10' : 'Off' } %}
          {% set state =  states('sensor.komfovent_mode_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_scheduler_mode:
        friendly_name: "Komfovent Scheduler Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'StayAtHome',
              '1' : 'WorkingWeek',
              '2' : 'Office',
              '3' : 'Custom'} %}
          {% set state =  states('sensor.komfovent_scheduler_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_temp_control_mode:
        friendly_name: "Komfovent Temperature Control Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Supply',
              '1' : 'Extract',
              '2' : 'Balance',
              '3' : 'Room'} %}
          {% set state =  states('sensor.komfovent_temp_control_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_flow_control_mode:
        friendly_name: "Komfovent Flow Control Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'CAV',
              '1' : 'VAV',
              '2' : 'DCV',
              '3' : 'OFF'} %}
          {% set state =  states('sensor.komfovent_flow_control_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_eco_free_heat_cool_mode:
        friendly_name: "Komfovent Eco Free Heating/Cooling Status Mode"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_eco_free_heating_cooling_status_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_eco_heater_blocking:
        friendly_name: "Komfovent Eco Heating Blocking"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_eco_heating_enabled_status_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_eco_cooler_blocking:
        friendly_name: "Komfovent Eco Cooler Blocking"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_eco_cooling_enabled_status_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}

      komfovent_eco_constant_heat_recovery:
        friendly_name: "Komfovent Eco Constant Heat Recovery"
        unit_of_measurement: "State"
        value_template: >-
          {% set mapper =  {
              '0' : 'Off',
              '1' : 'On'} %}
          {% set state =  states('sensor.komfovent_eco_constant_hr_enabled_status_num') %}
          {{ mapper[state] if state in mapper else 'Unknown' }}




  # - platform: number
  #     komfovent_yesterday_heater_total_kwh:
  #       name: "Komfovent Yesterday Heater Total"
  #       unit_of_measurement: kWh

input_number:
  komfovent_set_fan:
    name: "Komfovent Set Fan"
    unit_of_measurement: '%'
    min: 20
    max: 70
    step: 5

  komfovent_set_fan_vol:
    name: "Komfovent Set Fan Vol"
    unit_of_measurement: 'm³/h'
    min: 136
    max: 491
    step: 25

  komfovent_set_temp:
    name: "Komfovent Set Temp"
    unit_of_measurement: °C
    min: 15.0
    max: 26.0
    step: 0.1

  komfovent_set_eco_max_temp:
    name: "Komfovent Set Eco Max Temp"
    unit_of_measurement: °C
    min: 15.0
    max: 26.0
    step: 0.1

  komfovent_set_eco_min_temp:
    name: "Komfovent Set Eco Min Temp"
    unit_of_measurement: °C
    min: 15.0
    max: 26.0
    step: 0.1

shell_command:
  #set modes for 20 minutes (the =20 part)
  komfovent_kitchen_mode: >-
    curl 'http://192.168.7.32/' --data-raw '1=user&2=user' &&
    curl 'http://192.168.7.32/ajax.xml' --data-raw '282=20'

  komfovent_fireplace_mode: >-
    curl 'http://192.168.7.32/' --data-raw '1=user&2=user' &&
    curl 'http://192.168.7.32/ajax.xml' --data-raw '283=20'

  komfovent_overide_mode: >-
    curl 'http://192.168.7.32/' --data-raw '1=user&2=user' &&
    curl 'http://192.168.7.32/ajax.xml' --data-raw '284=20'

binary_sensor:
  - platform: template
    sensors:
      komfovent_status_starting:
        friendly_name: "Komfovent Status - Starting"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(1) > 0 }}"
      komfovent_status_stopping:
        friendly_name: "Komfovent Status - Stopping"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(2) > 0 }}"
      komfovent_status_fan:
        friendly_name: "Komfovent Status - Fan"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(4) > 0 }}"
      komfovent_status_rotor:
        friendly_name: "Komfovent Status - Rotor"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(8) > 0 }}"
      komfovent_status_heating:
        friendly_name: "Komfovent Status - Heating"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(16) > 0 }}"
      komfovent_status_cooling:
        friendly_name: "Komfovent Status - Cooling"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(32) > 0 }}"
      komfovent_status_heatingdenied:
        friendly_name: "Komfovent Status - Heating Denied"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(64) > 0 }}"
      komfovent_status_coolingdenied:
        friendly_name: "Komfovent Status - Cooling Denied"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(128) > 0 }}"
      komfovent_status_flow_down:
        friendly_name: "Komfovent Status - Flow Down"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(256) > 0 }}"
      komfovent_status_free_heating:
        friendly_name: "Komfovent Status - Free Heating"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(512) > 0 }}"
      komfovent_status_free_cooling:
        friendly_name: "Komfovent Status - Free Cooling"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(1024) > 0 }}"
      komfovent_status_alarm_f:
        friendly_name: "Komfovent Status - Alarm F"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(2048) > 0 }}"
      komfovent_status_alarm_w:
        friendly_name: "Komfovent Status - Alarm W"
        value_template: "{{ states('sensor.Komfovent_status')|int(0)|bitwise_and(4096) > 0 }}"

# Scripts to write values to the MODBUS Registers
script:
  komfovent_write_temp_setpoint_normal:
    alias: Komfovent Write Temp Setpoint Normal
    variables:
      valuetosend: 45
    fields:
      komfovent_temp_setpoint:
        name: Komfovent Temp Setpoint Value
        example: '195'
        description: Actual value is * 10; 19.5°C = 195
    sequence:
      - service: modbus.write_register
        data_template:
          hub: "Komfovent"
          address: 109
          unit: 1
          value: '{{ komfovent_temp_setpoint }}'
    mode: single

  komfovent_write_temp_to_reg:
    alias: Komfovent Write Temp to Register
    # variables:
    #   temptosend: 45
    fields:
      komfovent_temp:
        name: Value
        example: '195'
        description: Actual value is * 10; 19.5°C = 195
      komfovent_register:
        name: Register
        example: '0-999'
        description: The Modbus Register value to use (register - 1)
    sequence:
      - service: modbus.write_register
        data_template:
          hub: "Komfovent"
          address: '{{komfovent_register}}'
          unit: 1
          value: '{{ komfovent_temp }}'
    mode: single

  komfovent_write_fan_intensity_normal:
    alias: Komfovent Write Fan Intensity Normal
    variables:
      valuetosend: 45
    fields:
      komfovent_fan_intensity:
        name: Komfovent Fan Intensity Value
        example: '[0,40]'
        description: Writes same value to both fans and assumes intensity is set as a %
        selector:
          number:
            min: 0
            max: 100
            unit_of_measurement: "%"
    sequence:
      - service: modbus.write_register
        data_template:
          hub: "Komfovent"
          address: 105
          unit: 2
          value: '{{ komfovent_fan_intensity }}'
      - service: modbus.write_register
        data_template:
          hub: "Komfovent"
          address: 107
          unit: 2
          value: '{{ komfovent_fan_intensity }}'
    mode: single

  komfovent_dummy:
    alias: 'Komfovent Dummy script'
    sequence:
      delay: 00:00:00

automation:
  - alias: Komfovent Set Normal Temperature Input Number
    description: 'Set the input number to the Normal Setpoint value on HA start and if changed elsewhere (app or web)'
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: sensor.komfovent_status_normal_setpoint_c
    condition: []
    action:
      - service: input_number.set_value
        data:
          value: "{{states('sensor.komfovent_status_normal_setpoint_c')}}"
        target:
          entity_id: input_number.komfovent_set_temp
    mode: single

  - alias: Komfovent Write Normal Temp Setpoint on Input change
    description: 'Write Normal Setpoint when input_number changes'
    trigger:
      - platform: state
        entity_id: input_number.komfovent_set_temp
    condition: []
    action:
      - service: script.komfovent_write_temp_setpoint_normal
        data:
          komfovent_temp_setpoint: "{{(states('input_number.komfovent_set_temp') | float(2.0) * 10) | int(20)}}"
    mode: single

              # {{(states('sensor.komfovent_extract_fan_intensivity') | round(0,"common",20))
                # != (states('input_number.komfovent_set_fan') | round(0,"common",20))}}
  - alias: Komfovent Set Normal Fan Input Number
    description: 'Set the input number to the Extract Normal Fan Setpoint value on HA start and if changed elsewhere (app or web)'
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: sensor.komfovent_extract_fan_intensivity
    condition:
      - condition: and
        conditions:
        # Only set if using % i.e. under 90 (max %).
        - condition: numeric_state
          entity_id: sensor.komfovent_extract_fan_intensivity
          below: '90'
        - condition: template
          value_template: >- 
              {{(states('sensor.komfovent_status_normal_fan_extract_setpoint') | int(20))
                != (states('input_number.komfovent_set_fan') | int(20)) }}
    action:
      - service: input_number.set_value
        data:
          value: "{{states('sensor.komfovent_status_normal_fan_extract_setpoint') | int(20)}}"
        target:
          entity_id: input_number.komfovent_set_fan
    mode: single

  - alias: Komfovent Write Normal Fan Setpoint on Input change
    description: 'Write Normal Fan Setpoint (Sup & Extract) when input_number changes'
    trigger:
      - platform: state
        entity_id: input_number.komfovent_set_fan
    condition: []
    action:
      - service: script.komfovent_write_fan_intensity_normal
        data:
          komfovent_fan_intensity: ["0","{{states('input_number.komfovent_set_fan')}}"]
    mode: single

  - alias: Komfovent Record daily Heater consumption kWh
    description: ''
    mode: single
    trigger:
      - platform: numeric_state
        entity_id: sensor.komfovent_ahu_consumption_day_kwh
        below: 0.01
    action:
      - service: notify.persistent_notification
        data:
          message: Heater consumption yesterday {{trigger.from_state.state}}kWh
      - service: mqtt.publish
        data:
          topic: ha/kom_heater_yesterday
          retain: true
          payload: '{{trigger.from_state.state}}'

  - alias: Komfovent Write Eco Max Temp on Input change
    description: 'Write Eco Max Temp when input_number changes'
    trigger:
      - platform: state
        entity_id: input_number.komfovent_set_eco_max_temp
    condition: []
    action:
      - service: script.komfovent_write_temp_to_reg
        data:
          komfovent_temp: "{{(states('input_number.komfovent_set_eco_max_temp') | float(2.0) * 10) | int(20)}}"
          komfovent_register: 200
    mode: single

  - alias: Komfovent Set Eco Max Temp Input Number
    description: 'Set the input number to the Eco Max Temp value on HA start and if changed elsewhere (app or web)'
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: sensor.komfovent_eco_max_supply_temperature_c
    condition:
      - condition: template
        value_template: >- 
            {{(states('sensor.komfovent_eco_max_supply_temperature_c') | int(20)) 
              != (states('input_number.komfovent_set_eco_max_temp') | int(20))}}
    action:
      - service: input_number.set_value
        data:
          value: "{{states('sensor.komfovent_eco_max_supply_temperature_c')}}"
        target:
          entity_id: input_number.komfovent_set_eco_max_temp
    mode: single

  - alias: Komfovent Write Eco Min Temp on Input change
    description: 'Write Eco Min Temp when input_number changes'
    trigger:
      - platform: state
        entity_id: input_number.komfovent_set_eco_min_temp
    condition: []
    action:
      - service: script.komfovent_write_temp_to_reg
        data:
          komfovent_temp: "{{(states('input_number.komfovent_set_eco_min_temp') | float(2.0) * 10) | int(20)}}"
          komfovent_register: 199
    mode: single

  - alias: Komfovent Set Eco Min Temp Input Number
    description: 'Set the input number to the Eco Min Temp value on HA start and if changed elsewhere (app or web)'
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: sensor.komfovent_eco_min_supply_temperature_c
    condition:
      - condition: template
        value_template: >- 
            {{(states('sensor.komfovent_eco_min_supply_temperature_c') | int(20)) 
              != (states('input_number.komfovent_set_eco_min_temp') | int(20))}}
    action:
      - service: input_number.set_value
        data:
          value: "{{states('sensor.komfovent_eco_min_supply_temperature_c')}}"
        target:
          entity_id: input_number.komfovent_set_eco_min_temp
    mode: single

  # - alias: Komfovent Exercise Fans
  #   description: 'Write Normal Fan Setpoint (Sup & Extract) when input_number changes'
  #   trigger:
  #     - platform: state
  #       entity_id: input_number.komfovent_set_fan
  #   condition: []
  #   action:
  #     - service: script.komfovent_write_fan_intensity_normal
  #       data:
  #         komfovent_fan_intensity: ["0","{{states.input_number.komfovent_set_fan.state}}"]
  #   mode: single