GameCube Blueretro conflicts with Wavebird

[Aleksi87]

BlueRetro firmware version

24.10

BlueRetro firmware specification

HW1

BlueRetro firmware variant

System specific

BlueRetro hardware type

Internal install DIY

Manufacturer

Myself

System used

Nintendo GameCube

Bluetooth controller brand & name

Wavebird

What is problem? (only list ONE problem per report)

After I soldered the ESP32 HW1 on my Cube's controller board it works as it should with modern BT controllers but strangely enough the Wavebird controller stopped functioning since then. The analog stick does not work at all, I tried different frequencies like 1,6,8,16 but the issue persists.
When I plug in a wired OEM controller it works perfectly fine.

I also tried to add a small switch on the negative of ESP32 so that I can turn it OFF when I want to use Wavebird but when I do turn off the ESP32 the controller board does not work at all, it does not recognize any controllers at all!

If ESP32 can not coexist with Wavebird in peace thenn please provide instructions on how to disable ESP32 before using Wavebird.

What did you expect to happen?

Wavebird should function properly with ESP32 Blueretro

Attach files like logs or Bluetooth traces here

No response

[bkacjios]

Sounds a little similar to the issue I put in #1088. I have the full on laserbear kit though.

[Aleksi87]

Edit: I have followed the MundoYakara method actually, maybe that is the reason I have these issues?
https://www.youtube.com/watch?v=BrarEgOK4uw&t=1057s&pp=ygUVbXVuZG8geWFrYXJhIGdhbWVjdWJl