Skip to content
This repository has been archived by the owner on Sep 29, 2024. It is now read-only.

Latest commit

 

History

History
189 lines (124 loc) · 4.94 KB

README.md

File metadata and controls

189 lines (124 loc) · 4.94 KB

GNOME Shell container

Fedora container for testing GNOME Shell extensions on GitHub Actions (and also locally).

Based on https://github.com/Schneegans/gnome-shell-pod

How to use

This container runs systemd, both system and user instances. Probably, you could make it work in Docker with oci-systemd-hook, but it's not packaged for Arch (which I use as my workstation distro), or Ubuntu (used on GitHub Actions runners). So using Podman seems to be the only viable option.

Note: currently, rootless Podman doesn't work on GitHub Actions runners, you'll have to run it under sudo.

1. Start the container using Podman, mount extension sources into ~/.local/share/gnome-shell/extensions/:

SOURCE_DIR="${PWD}"
EXTENSION_UUID="[email protected]"
IMAGE="ghcr.io/ddterm/gnome-shell-pod/fedora-39:master"
PACKAGE_MOUNTPATH="/home/gnomeshell/.local/share/gnome-shell/extensions/${EXTENSION_UUID}"

CID=$(podman run --rm --cap-add=SYS_ADMIN,SYS_NICE,SYS_PTRACE,SETPCAP,NET_RAW,NET_BIND_SERVICE,IPC_LOCK --security-opt=label=disable -v "${SOURCE_DIR}:${PACKAGE_MOUNTPATH}:ro" -td "${IMAGE}")

2. Wait for the system to start:

Wait for system D-Bus to start:

podman exec "${CID}" busctl --watch-bind=true status

Wait for the system to complete startup:

podman exec "${CID}" systemctl is-system-running --wait

3. Enable the extension:

podman exec --user gnomeshell "${CID}" set-env.sh gnome-extensions enable "${EXTENSION_UUID}"

CGroups v1/v2

The default systemd command line sets systemd.unified_cgroup_hierarchy=0 (CGroups v1 mode) for compatibility with older distributions on the host side.

Wayland

By default, X11 session starts.

To start Wayland session, add systemd.unit=gnome-session-wayland.target to the systemd command line:

podman run --rm --cap-add=SYS_ADMIN,SYS_NICE,SYS_PTRACE,SETPCAP,NET_RAW,NET_BIND_SERVICE,DAC_READ_SEARCH,IPC_LOCK -v "${SOURCE_DIR}:${PACKAGE_MOUNTPATH}:ro" -td "${IMAGE}" /sbin/init systemd.unified_cgroup_hierarchy=0 systemd.unit=gnome-session-wayland.target

It still runs in Xvfb, but in nested mode. Without window manager running on the "top level", the window has no decorations, and is effectively full screen.

If you don't want GNOME session to start automatically, you could pass systemd.unit=multi-user.target. Then you could activate the necessary target manually:

podman exec "${CID}" systemctl start gnome-session-wayland.target

D-Bus

Session D-Bus daemon is listening on TCP port 1234. To access it from host, add --publish/--publish-all option to podman run (see podman docs).

To get the host-side port number, use podman port command:

podman port "${CID}" 1234

It will output something like:

127.0.0.1:42325

or

0.0.0.0:42325

It will translate into D-Bus address tcp:host=localhost,port=42325.

For example:

dbus-send --bus=tcp:host=localhost,port=42325 --print-reply --dest=org.freedesktop.DBus /org/freedesktop/DBus org.freedesktop.DBus.Peer.Ping

Container-side port number (1234) is also stored in user-dbus-port label. You could get it using the following command:

podman container inspect --format='{{index .Config.Labels "user-dbus-port"}}'

X11/Xvfb display

Xvfb starts on display :99. If you want to run some X11 utility, you should add -e DISPLAY=:99 to podman exec.

Also, Xvfb display is available over TCP, on port 6099. It will be published by --publish-all too.

To get the host-side port number, use podman port command:

podman port "${CID}" 6099

It will output something like:

127.0.0.1:42325

or

0.0.0.0:42325

You'll need to subtract 6000 from the port number to get X11 display number.

Then run X11 utilities on the host like this:

DISPLAY=127.0.0.1:36325 xte "mousedown 1"

Container-side port number (6099) is also stored in x11-port label. You could get it using the following command:

podman container inspect --format='{{index .Config.Labels "x11-port"}}'

Building the image

Debian/Ubuntu image

podman build -f debian.dockerfile --format docker .

By default it builds on top of the latest stable Debian release (debian:latest on Docker Hub).

--format docker is necessary for health check support.

To choose another base image/distro, pass --build-arg base_image=...:

podman build -f debian.dockerfile --format docker --build-arg base_image=ubuntu:20.04 .

Fedora image

podman build -f fedora.dockerfile --format docker .

By default it builds on top of the latest stable Fedora release (fedora:latest on registry.fedoraproject.org).

--format docker is necessary for health check support.

To choose another base image/distro, pass --build-arg base_image=...:

podman build -f fedora.dockerfile --format docker --build-arg base_image=registry.fedoraproject.org/fedora:34 .