CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[Unreleased]

Added

Fixed

• Fixed partition-table-offset argument to accept offsets in hexadecimal (#682)

Changed

3.1.1 - 2024-08-15

Added

• Add hold-in-reset and reset subcommands (#644)
• [cargo-espflash]: Add --no-default-features flag to mirror cargo features behavior (#647)
• Update cargo and bytemuck dependencies adapting code (#666)

Fixed

• Downgrade crossterm and update time crates (#659)
• Monitor now only sends key presses on key down events

Changed

3.1.0 - 2024-05-24

Added

• Support loading flash size, frequency, and mode from the config file (#627)

Fixed

• Fixed help text for size parameter of read-flash subcommand
• Fixed port detection on musl when detection returns paths starting with /dev/
• [cargo-espflash]: Always resolve package_id from metadata when finding bootloader and partition table (#632)
• Fixed behavior of the --target-app-partition flag (#634)

Changed

• Update ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-S2, ESP32-S3 stub (#638)

3.0.0 - 2024-03-13

Fixed

• Fix timeout while changing the baudrate for some ESP32-S3 targets (#607)

Changed

• Update ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-S2, ESP32-S3 stub (#607, #610)

3.0.0-rc.2 - 2024-03-04

Added

• Add --list-all-ports connection argument to avoid serial port filtering (#590)
• Allow config file to live in parent folder (#595)

Fixed

• Change the hard_reset sequence to fix Windows issues (#594)
• Improve resolving non-code addresses (#603)

Changed

• Non-linux-musl: Only list the available USB Ports by default (#590)
• FlashData::new now returns crate::Error (#591)
• Moved reset_after_flash method to reset module (#594)
• The command module now requires serialport. (#599)

3.0.0-rc.1 - 2024-02-16

Added

• Add reset strategies (#487)
• Read esp-println generated defmt messages (#466)
• Add --target-app-partition argument to flash command (#461)
• Add --confirm-port argument to flash command (#455)
• Add --chip argument for flash and write-bin commands (#514)
• Add --partition-table-offset argument for specifying the partition table offset (#516)
• Add Serialize and Deserialize to FlashFrequency, FlashMode and FlashSize (#528)
• Add checksum-md5 command (#536)
• Add verify and skipping of unchanged flash regions - add --no-verify and --no-skip (#538)
• Add --min-chip-rev argument to specify minimum chip revision (#525)
• Add serialport feature (#535)
• Add support for 26 MHz bootloader for ESP32 and ESP32-C2 (#553)
• Add CI check to verify that CHANGELOG is updated (#560)
• Add --before and --after reset arguments (#561)
• Add read-flash command (#558)
• Add HIL testing (#596)

Fixed

• Fix printing panic backtraces when using esp-println and defmt (#496)
• Fix defmt parsing when data is read in parts (#503)
• Use partition table instead of hard-coded values for the location of partitions (#516)
• Fix a missed flush call that may be causing communication errors (#521)
• Fix "SHA-256 comparison failed: [...] attempting to boot anyway..." (#567)
• Windows: Update RST/DTR order to avoid issues (#562)
• Tolerate non-utf8 data in boot detection (#573)
• Fix flash/monitoring of 26MHz targets (#584)

Changed

• Create FlashData, FlashDataBuilder and FlashSettings structs to reduce number of input arguments in some functions (#512, #566)
• espflash will now exit with an error if defmt is selected but not usable (#524)
• Unify configuration methods (#551)
• Improved symbol resolving (#581)
• Update ESP32-C2 stub (#584)
• MSRV bumped to 1.74.0 (#586)

Removed

• Remove support for Cargo metadata configuration (#551)
• Remove support for the ESP8266 (#576)
• Remove the direct boot image format (#577)
• Remove support for Raspberry Pi's internal UART peripherals (#585)

2.1.0 - 2023-10-03

Added

• Added erase-flash, erase-region, and erase-parts subcommands (#462)

Fixed

• Fixed printing UTF-8 sequences that were read in multiple parts. (#468)

Changed

• Update dependencies to their latest versions (#482)

2.0.1 - 2023-07-13

Added

• Add help text for all subcommands (#441)

Fixed

• Update cargo dependency to 0.72 (#445)

2.0.0

Fixed

• Explicitly set bin_name attribute for cargo-espflash (#432)

2.0.0-rc.4 - 2023-06-08

Added

• Add ESPFLASH_PORT environment variable (#366)
• Added ESP32-H2 support (#371)
• Generate Shell completions (#388)
• Make the default flashing frequency target specific (#389)
• Add note about permissions on Linux (#391)
• Add a diagnostic to tell the user about the partition table format (#397)

Fixed

• Fix espflash::write_bin (#353)
• Fix ESP32-C3 direct boot (#358)
• Disable watchdog timer before build (#363)
• Restore the cursor when exiting from serial port selection via Ctrl-C (#372)
• Fix chip revision check during flashing for the ESP8266 (#373)
• Fix config file parsing (#382)
• Limit default partition size (#398)
• Fix Windows installation (#399)
• Reword elf too big error (#400)
• Fix handling of serial ports on BSD systems (#415)
• Override the flash size in Flasher if provided via command-line argument (#417)

Changed

• Simplify and improve errors (#342)
• Make Interface constructor public (#354)
• Update stubs from esptool v4.5 (#359)
• Update documentation (#368)
• Update toml dependency and fix errors, feature gate ctrlc dependency (#378)
• If exactly one port matches, use it (#374)
• Image header improvements and bug fixes (#375)
• Update to the latest version of addr2line and address breaking changes (#412)
• Do not require the --partition-table argument when erasing partitions (#413)
• Downgrade crossterm to 0.25.0 (#418)
• Update the supported targets for ESP32-C6/H2 (#424)
• Update flasher stubs and bootloaders (#426)

2.0.0-rc.3 - 2023-01-12

Added

• Add support for flashing the ESP32-C6 (#317)
• Add an optional callback trait which can be implemented and provided to most flashing functions (#333)

Fixed

• Various fixes and improvements relating to crystal frequency and serial monitor for the ESP32-C2 (#314, #315, #330)

Changed

• Reorder ports so that known ports appear first in CLI (#324)
• Make the flasher return a struct of device information instead of printing directly (#328)
• CLI improvements and dependency updates (#334)
• Use the flasher stub by default (#337)
• Mark public enums as #[non_exhaustive] for semver compatibility (#338)
• If a bootloader and/or partition table other than the defaults have been provided, indicate such (#339)

2.0.0-rc.2 - 2022-12-07

Added

• Add option to supply the ELF image path in the monitor subcommand (#292)
• Add support for using custom cargo metadata when in a workspace (#300)

Fixed

• Fix typo in ImageFormatKind's FromStr implementation (#308)

Changed

• Report the image and partition size in the error (#293)
• Allow SerialPortType::PciPort during port detection (#295)
• Update dependencies to their latest versions (#299)
• Clean up unused code, optimize comparison in find_serial_port (#302)
• Make command module public (#303)
• Display the newer v{major}.{minor} chip revision format (#307)

2.0.0-rc.1 - 2022-11-07

Added

• Add support for erasing any partition (#273)

Fixed

• Various bugfixes, plenty of cleanup and simplification

Changed

• Redesign of the command-line interface (#239)
• Extract the partition table handling code into a separate package, esp-idf-part (#243)
• A bunch of refactoring (#246, #247, #249)
• Updated to [email protected] (#251)
• Replace the espmonitor dependency with our own home-grown monitor (#254)
• Use logging instead of println!() (#256)
• Use newest bootloaders from ESP-IDF (#278)
• Improved documentation and testing

1.7.0 - 2022-09-16

1.6.0 - 2022-07-11

1.5.1 - 2022-05-20

1.5.0 - 2022-05-11

1.4.1 - 2022-04-16

1.4.0 - 2022-04-06

1.3.0 - 2022-02-18

1.2.0 - 2021-12-15

1.1.0 - 2021-10-16

1.0.1 - 2021-09-23

1.0.0 - 2021-09-21