multi-source configuration file

[Annemariev-zwol]

Hi all,

I have tried to create a multi-source configuration file (one source containing lower L-band data and one source containing upper L-band data) and I seem to run into an issue. As explained on the signal source page (https://gnss-sdr.org/docs/sp-blocks/signal-source/#multiple-sources), I have assigned a signal source and an RFI chain and a signal type to each channel. The acquisition, tracking and telemetry decoding do seem to work (I can see messages coming in for all four signal types that are included in the input files and for which the configuration file is configured) and output files for these steps also contain info for all four signal types. However, when I look at the observables output, only data from the upper L-band (which was inputted as source 0) is included. The rows for channels assigned to input source 1 (where the lower L-band data was inputted) remain empty. Does someone perhaps know what I do wrong or how this problem can be solved?

(For clarity I have added the configuration file to this message)
conffile_multi_source.txt

Thanks in advance,

Annemarie van Zwol