Skip to content

Latest commit

 

History

History
2751 lines (2304 loc) · 138 KB

CHANGELOG_v8.md

File metadata and controls

2751 lines (2304 loc) · 138 KB

Changelog (v1 to v8)

8.11.8 (2022-03-04)

Bugfixes

  • Increase the default controller response timeout to 10s to work around an issue where some 500 series controllers take too long to confirm execution of a SendData command when the target node is unresponsive (#4259)

8.11.7 (2022-02-28)

Bugfixes

  • Restoring an NVM backup with an unsupported format on a stick with an unsupported NVM format is possible again. This enables working with backups on legacy (before SDK 6.61) controllers.
  • The wakeup node ID which is determined when including a node is now stored under the correct value and no longer overwrites the wakeup interval.

Config file changes

  • Correct volume parameter for Aeotec Siren Gen5
  • Add Philio PSR03-A, -B and -C
  • Add support for paddle programming on Zooz 700 Dimmers
  • Association command type for Aeotec illumino switches
  • Fix parameter 155 unit (W instead of seconds) for FGR223
  • Fix configurations for Aeotec ZW111 and FT111
  • Align Trane XL624 config with XR524
  • Add AU/NZ fingerprint to Aeotec Home Energy Meter - Gen5

Changes under the hood

  • Our bot now bugs the author of the issue when no logfile or the wrong logfile is provided, despite the description filling half a screen
  • Set some options in .vscode/launch.json to prevent the debugger from locking up in VSCode 1.64+ 🤷🏻‍♂️
  • In config files, min/maxValue is now optional if allowManualEntry is false

8.11.6 (2022-02-14)

Bugfixes

  • When converting an NVM, the page size is now limited to the maximum supported by Z-Wave sticks, even if the existing metadata contains a larger page size.

Config file changes

  • Update GE/Jasco ZW3012 Configuration to correct LED status
  • Add config for Keemple KP-SO-02 Smart Socket
  • Cleanup Shenzhen Neo device configs
  • Add MCO Home 3901-Z thermostat
  • Fix regression of bug #1581 (wrong valueSize, param 13 of LZW31-SN)

Changes under the hood

  • Several dependency updates

8.11.5 (2022-02-08)

Bugfixes

  • Fixed a TypeError that could happen when parsing a controller's NVM backup
  • After healing, battery-powered nodes are sent back to sleep again
  • Added a workaround for thermostats that don't advertise all their supported thermostat modes. When such a thermostat enters such an "unsupported" mode, the mode is now dynamically added to the list of supported modes.

8.11.4 (2022-02-06)

Bugfixes

  • The 500-to-700 series NVM conversion routine now correctly considers all potentially existing nodes
  • The Home ID is no longer lost after restoring a 500 series NVM onto a 700 series stick

Config file changes

  • Add fingerprint for AU/NZ model of Aeotec NanoMote Quad
  • Add ConnectHome CH-103
  • Add RU fingerprint to Sunricher ZV9101
  • Add Alarm.com Smart Thermostat ADC-T3000

8.11.3 (2022-02-02)

Config file changes

  • Add new product id to Shenzhen Neo NAS-PD07ZU1
  • Various abandoned PRs and issues
  • Fix sent scenes configuration for Fibaro Walli Roller FGWREU-111
  • Fix sent scenes configuration for Fibaro Walli Dimmer FGWDEU
  • Update Inovelli LZW31-SN device config to match official documentation
  • Add unit and mention range for Qubino ZMNHTD1 param 42
  • Add LED indicator parameters to GE Fan Controller 14287
  • Update Fibaro FGK-101 device config with units and options
  • Fixed incorrect parameter range for HomeSeer Floodlight Sensor HS-FLS100+
  • Add SmartDHOME MyOT
  • Add Simon Tech Master Blind Button
  • Add param 38 to Aeotec Siren Gen5, FW 3.25+
  • Add fingerprint 0x0811:0x23a8 to "Kwikset HC620"
  • Add warning to Eurotronics Spirit TRV about missing mode
  • Add fingerprint 0x0102:0x0064 to "Fantem FT100"
  • Add iblinds V3/V3.1 parameters (8-10)
  • Fix ZEN25 parameter units and align with style guide
  • Add parameter 10 (all on, all off) to Qubino SmartMeter ZMNHTD
  • Add fingerprint to Fibaro FGD212
  • Add Relay Load Power for Heltun HE-RS01
  • Add Defaro DAT-101 and a fingerprint for Fibaro FGFS101
  • Added inclusion, exclusion and reset instructions to Danfoss MT02650
  • Add association to Leviton DZ15S switch

Changes under the hood

  • Correctly check min/max/default values for signed partial parameters

8.11.2 (2022-01-18)

Config file changes

  • Add Eurotronic Temperature & Humidity Sensor
  • Add Vesternet devices
  • Add missing option to Zooz Zen16
  • Add missing parameters for HANK Electronics HKZW-SO03
  • Correct lifeline for RF9540-N v1.2+ and map Basic Sets
  • Added roller blind switch type to Fibaro FGD211 FW2.2+

8.11.1 (2022-01-16)

Config file changes

  • Update Z-Uno definition for custom configuration parameters
  • Add new firmware features to Heltun devices
  • Add Momentary Toggle Switch to Hold Control Modes for Heltun HE-RS01
  • Add MCOHome MH-S220
  • Adjust acceleration unit string

8.11.0 (2022-01-13)

Features

  • Add support for Humidity Control Mode CC
  • Add support for Humidity Control Operating State CC
  • Add support for Humidity Control Setpoint CC

Bugfixes

  • For associations that are not reported by a device, fall back to the maximum node count defined in config files instead of always 0

Config file changes

  • Correct Trane XR524 parameters
  • Add fingerprint for Aeotec ZWA024-C (Multisensor 7 EU version)
  • Change default for Temperature Scale parameter of Zooz ZSE40

8.10.2 (2022-01-10)

Bugfixes

The colors dependency was recently corrupted on purpose. This patch updates all dependencies that depended on an affected version, directly or indirectly.

Config file changes

  • Correct lifeline association and param 3 for ZWN-RSM2-PLUS
  • Correct parameter 10 (LED blink on motion) for Shenzhen Neo NAS-PD01Z

8.10.1 (2022-01-08)

Bugfixes

  • Immediately soft reset after restoring an NVM backup, instead of after restarting
  • Use a relative path for the logfile symlink

Config file changes

  • Enable Basic Set mapping for Swiid SW-ZCS
  • Add Ring Outdoor Contact Sensor, correct Contact Sensor Gen2
  • Add Ecolink Tilt-zwave5

8.10.0 (2022-01-04)

Features

  • Added the waitForWakeup message to the ZWaveNode class to wait until the node is awake
  • Delay resetting node info on re-interview for sleeping nodes until they wakeup
  • Logging to file now creates a tailable symlink to the current logfile

Bugfixes

  • Supervision requests are answered again, even when the requesting node is asleep
  • Node responses claiming no support (version 0) for some critical CCs (Version CC and Manufacturer Specific CC) are now ignored

Config file changes

  • Add Shenzen Neo DS07Z door/window switch
  • Add Heatit Z-Push Wall Controller
  • Add undocumented parameter 61 to wiDom WDS2
  • Add Inteset Door/Window Sensor
  • Add Powerley PWLY-7828-A1 Thermostat
  • Add fingerprint 0x0300:0xa10b to Sunricher SR-ZV9001T4-DIM
  • Add many new devices from Z-Wave Alliance DB
  • Add warning to NAS-WR01ZE about huge negative values
  • Correct EVA LOGIK ZW39 device files
  • Update/consolidate HomeSeer parameters for WD200 and WX300
  • Add Zooz ZSE43 and ZSE44 device config files
  • Disable Basic CC mapping for Logic Group ZDB5100
  • Add variant of TKB Home TSM02 with manufacturerId 0x4118
  • Fix scene parameters for FGWDEU-111 (Fibaro Walli Dimmer)
  • Correct incorrect parameter values in various Heltun devices

Changes under the hood

  • Performance improvements for the Value DB

8.9.2 (2021-12-27)

Bugfixes

  • Correctly reset firmware update status on failed updates
  • Update the node status correctly for non-SendData commands that are targeted at nodes

Config file changes

  • Add fingerprint 0x0203:0x008d to AEON Labs ZW141 Nano Shutter

Changes under the hood

  • Improved write performance of the value DB

8.9.1 (2021-12-23)

Bugfixes

  • More messages to nodes are treated like SendData and repect/contribute the node status
  • When changing the type of a lifeline association, the removed association is now also deleted from cache
  • Fixed an issue where the send queue would get stuck after aborting an ongoing transmission

Config file changes

  • Clarify parameter function for Aeotec Smart Switch 7
  • Add Parameter 17 to Zen71 Switch (firmware dependent)

Changes under the hood

  • Support adding comments to devices

8.9.0 (2021-12-22)

Features

  • Add support for Door Lock Logging CC
  • Added a CLI tool to edit the NVM of controllers with SDK 6.61 (500 series) through 7.17.0 (700 series)
  • Added the controller method restoreNVM which automatically converts an NVM backup to the target format before restoring it.

Bugfixes

  • Make sure that encodePartial returns an unsigned int
  • Send nodes to sleep again after successful response
  • Reuse S0 nonce for the lifetime of a CC instance
  • Do not send Supervision Reports when another transaction is active
  • Use the last 10 sequence numbers to check for duplicate S2 messages
  • Fix computation of neighbor discovery timeout
  • Skip CC interview step for the controller node
  • Correct error message when SmartStart isn't supported
  • Send battery nodes to sleep after all message types targeting them, not only SendData which expect a response
  • Disallow Node.js releases that are dev previews or don't support subpath export patterns
  • Fixed a crash that happened when an in-flight message expired
  • Don't query all security classes if the highest one is known, e.g. directly after the inclusion
  • Errors during Serial API command execution are now properly forwarded and no longer stall the communication
  • Security S0 nonce handling was improved to avoid nonces timing out before first use
  • When waiting for a reply from a node, nonce requests from other nodes are queued instead of handled immediately. Especially with the current 700 series issues, this should avoid some iterruptions in the communication.
  • Interpret the callback status for the SetSUCNodeID command correctly
  • Update the cached SUC node id after self-promotion

Config file changes

  • Added metadata for HS-WX300
  • Several units and re-trigger parameter 5 default on ZP3111-5
  • Additional Product ID for HS-WX300
  • Update Keemple Smart Radiator
  • Add metadata to POPP Smart Radiator
  • Add product ID 0x0164 to SimonTech Roller Blind
  • Deprecate firmware version file splits, prefer conditionals
  • Fix typo in param labels
  • Clean up configuration and correct param ranges for Steinel XLED Home 2
  • Clean up and consolidate ARZ Roller Shutters
  • Add double tap support to GE/Jasco 45609
  • Fixed a typo in master_template and correct MP21ZD options
  • Correct params for Fibaro FGWP102 FW 3.2
  • Clarify dim level parameter label for GE/Jasco 26932 / 26933 / ZW3008
  • Add fingerprint for AU/NZ model of Aeotec ZW141
  • Add fingerprint 0x0100:0x400a to Fibargroup FGD211
  • Add metadata for GE/Jasco 46202
  • Add ABUS PLHA10000
  • Add fingerprint 0x0404:0x3000 to FIBARO FGS214
  • Add configuration for Smartly Wheel Controller
  • Update Z-Uno definition
  • Treat Basic Set as event for ZW15S
  • Correct parameters 40 & 42, Qubino ZMNHTD
  • Correct valueSize for parameter 3, Aeotec ZWA039

Changes under the hood

  • Restored the changes to the outgoing message handling. Related bugfixes are mentioned above.

8.8.3 (2021-12-03)

Bugfixes

  • Temporarily revert the changes to the outgoing message handling, which fails on some edge cases

8.8.2 (2021-11-26)

Bugfixes

  • Fixed an issue where the driver could get stuck in a loop sending a node to sleep

8.8.1 (2021-11-25)

Bugfixes

  • Don't cancel scheduled verification polls for "value updated" events caused by the emitValueUpdateAfterSetValue option

8.8.0 (2021-11-25)

Features

  • The state machine handling outgoing messages has been rewritten from scratch, eliminating hard-coded message specific logic and adding the ability to handle sequenced messages. Things like requesting Security S0/S2 nonces and waiting for responses to GET requests now happens outside the state machine.
  • When a Z-Wave controller supports emitting transmit status reports for sent commands, these are now parsed, enabling further evaluation in future releases.
  • Implemented methods to check the health of routes between a node and the controller or other nodes.
  • Added an option to refreshInfo that allows resetting the cached info about granted security classes.
  • Added a driver option to emit "value update" events after setValue

Bugfixes

  • Before destroying the driver, remember that soft reset is not supported when a stick fails to re-connect
  • Don't handle SIGINT in the driver, let applications take care of it
  • Correctly reset inclusion state after soft reset
  • Assert that node exists before checking security class
  • Store controllerNodeId after configuring it during the interview
  • Add Vision Gen5 USB Stick to soft reset blacklist
  • Fixed the JSDoc comments for the grantSecurityClasses user callback
  • The commandsDroppedTX node statistics are now updated when an outgoing command could not be sent to a node

Config file changes

  • Disable Basic CC mapping for HeatIt TF016
  • Add REHAU AG RE.GUARD
  • Add device Inteset WR01Z
  • Update Zooz ZEN15 Config to FW 1.6+
  • Add manufacturer Inteset (0x039a)
  • Add fingerprint 0x0303:0x4000 for Fibaro FRG223
  • Add parameter 17 to Zooz ZEN73 (FW 10.0+)
  • Add Ecolink TBZ500 Z-Wave Smart Thermostat
  • Change some parameter units to seconds for Minoston MP20Z
  • Update Spectrum Brands 892 to match style guide / 893 file format
  • Add Spectrum Brands 893 deadbolt
  • Treat Basic Set as event for Merten single switch

Changes under the hood

  • Upgraded yarn to v3.1 and switched from PnP to the new pnpm linker
  • Migrate from project-snippets extension to VSCode-native snippets
  • Upgrade to TypeScript 4.5
  • Added documentation for serial-over-tcp connections

8.7.7 (2021-11-18)

Bugfixes

  • Add driver emitValueUpdateAfterSetValue option to emit "value updated" events after setValue

8.7.6 (2021-11-15)

Bugfixes

  • Update thermostat setpoint metadata when unit changes between reports
  • Avoid exiting the process while waiting for the Serial API to start up if the event loop is otherwise empty

Config file changes

  • Swap param 9 partials, add missing option for ZW100/FT100
  • Force-add missing CCs to ZMNHAA
  • Update ZEN23 config file with conditional parameters
  • Add missing units to Fibaro FGBS-222
  • Change firmware range for Aeotec a├½rQ v1
  • Add fingerprint 0x0300:0xa10d to Sunricher SR-ZV9001T4-DIM
  • Correct LED Indicator Control parameter for ZEN27
  • Map reports from root to endpoint 1 on Fibaro Single Switches
  • Fix spelling in label for Honeywell 39349

Changes under the hood

  • Remove revision property from import script

8.7.5 (2021-11-05)

Bugfixes

  • When a 500-series USB stick reconnects during startup, the process doesn't exit anymore if the event loop is otherwise empty
  • Increase delay before verifying thermostat values after set

Config file changes

  • Add Ring 4AR1SZ-0EN0 Alarm Extender Gen2

8.7.4 (2021-11-03)

Bugfixes

  • Fixed a crash that happened when determining the SDK version for certain protocol versions

8.7.3 (2021-11-03)

Bugfixes

  • The node ID of an existing node is no longer unnecessarily stored when serializing the provisioning list
  • Fixed assignment of lifeline associations that only support node associations, even though multi channel associations are supported by the node
  • The SmartStart feature is now limited to Z-Wave SDK 6.81+. Support needs to be tested before using the feature.

Config file changes

  • Add HomeSeer HS-WX300 Switch
  • Add missing parameters for Telldus TZWP-102
  • Add fingerprint to NAS-WR01ZE

8.7.2 (2021-11-02)

Bugfixes

  • When provisioning an already-included node, the provisioning entry now gets assigned the node ID immediately

8.7.1 (2021-11-02)

Bugfixes

  • Fix auto-enabling SmartStart listening mode after an inclusion or exclusion

8.7.0 (2021-11-01)

Features

  • Add support for SmartStart and S2-only inclusion through pre-provisioned security information
  • Expose a helper function to parse QR code strings into provisioning information

Bugfixes

  • During S2 bootstrapping, send the controller's public key immediately to keep the included node from timing out
  • Allow removing associations with invalid node IDs
  • When the controller reports its own ID as 0 on startup, repeat the controller identification after soft-reset or restart
  • Fix polling of Fibaro CC

Config file changes

  • Add Aeotec aërQ Humidity Sensor v2
  • Add support for Heltun HE-FT01, small fixes for HE-HT01
  • Delay manual refresh for Leviton DZS15
  • Treat Basic Set as event for Merten FunkTaster CONNECT
  • Fix reporting for Fibaro FGT001
  • Fix reporting for Fibaro FGS-223

8.6.1 (2021-10-26)

Bugfixes

  • Try to detect if a Z-Wave stick is incompatible with soft-reset and automatically disable the functionality

8.6.0 (2021-10-25)

Features

  • Implemented and use soft reset command. If this causes problems, you can opt-out.
  • Implemented 700-series variant of NVM backup/restore
  • Add driver option to change where lockfiles are created
  • Implement waitForMessage to await unsolicited Serial API messages
  • Add context object to log messages

Bugfixes

  • Avoid force-adding Supervision support, remove encapsulation CCs from list of mandatory CCs
  • Check correct transaction for pauseSendThread flag
  • Remove listeners before closing serial port
  • Emit Driver_Failed error when serial port errors
  • Better error when creating a multicast group with missing nodes
  • Security S2 bootstrapping is now aborted when an incorrect PIN is entered
  • Avoid queuing duplicate firmware fragments
  • Add additional 1s delay before verifying a value that has been set through the setValue API with a transition duration

Config file changes

  • Add support for Heltun panels
  • Auto-assign Binary Sensor Report association group for FortrezZ MIMOLite
  • Add LRM-1000 Wall Mounted Dimmer
  • Merge MH9-CO2 variants, add Z-Wave+ variant with firmware 2.4
  • Add fingerprint 0x0331:0x010b to "FortrezZ LLC SSA3"
  • Add Heatit Z-Push Button 4
  • Update NAS-AB01Z to match manual
  • Clean up Zooz Zen 7x configs
  • Correct manufactuerID for Zooz ZAC36
  • Correct param 100 and preserve endpoints for ZMNHTD
  • Force notification idle reset for Vision Security ZP3103
  • Update lifeline config and parameters for Philio PAN06 v1
  • Add fingerprint 0x0200:0x1022 to Shenzhen Neo NAS-DS01Z
  • Add Fakro FVS Solar Powered Skylight
  • Tidy up Vitrum devices
  • Correct identification of Vision ZP3111-5
  • Remove endpoints from FGS-212

Changes under the hood

  • supportsZWavePlus property was removed from config files and documentation
  • The paramInformation property in config files was converted to an array in order to preserve ordered parameters
  • Environment variables on Gitpod should now be set correctly

8.5.0 (2021-10-11)

Features

  • Export getAPI through zwave-js/CommandClass
  • Add getDefinedValueIDs for virtual nodes

Bugfixes

  • Avoid including undefined properties in configuration metadata
  • Add debug logging to configureLifelineAssociations, always query normal association groups
  • Remove Security S0/S2 from mandatory CCs in Device Classes configuration
  • Refresh associations after removing invalid destinations
  • Don't wait for node ACK after Security 2 CC::TransferEnd
  • Increase tolerance for wakeup interval to 5 minutes without auto-refreshing the interval
  • Remove securityClasses property from SecurityClassOwner interface to fix TypeScript error
  • Filter out corrupted Meter CC Reports and Multilevel Sensor CC Reports
  • Added a fallback for NVM backup when the initial response contains an empty buffer

Config file changes

  • Change NAS-PD07Z parameters to match actual device configuration
  • Delete duplicate config file for Fakro ZWS230
  • Update ZCOMBO-G units/metadata
  • Add fingerprint to BeNext Energy switch
  • Add support for Sensative AB Strips Drip 700
  • Spelling mistake in manufacturer name
  • Add Sunricher RGBW and CCT wall controllers
  • Add firmware version 1.6 to Zooz ZEN22
  • Force scene count of VRCS4 and VRCZ4 to 8
  • Add Aeotec illumino switches

Changes under the hood

  • Add support for prebuilt Gitpod instances to simplify contributing without installing VSCode locally
  • Dependency updates

8.4.1 (2021-09-27)

Bugfixes

  • Responses to secure Supervision CC::Get commands are now correctly sent with security encapsulation if required
  • Errors in application-provided callbacks for Security S2 bootstrapping are now caught

Config file changes

  • Auto-idle notifications for Ecolink DWZWAVE25

Changes under the hood

  • Fixed the workflow for creating test releases from PRs

8.4.0 (2021-09-26)

Features

  • Added a compat flag to override the number of scenes accessible to Scene Controller Configuration CC
  • Experimental support for Wake Up on demand
  • The values of Scene Actuator Configuration CC are now pre-created during the node interview

Bugfixes

  • CCs that are removed via a configuration files now stay removed after the Security S0/S2 interview
  • Implemented a workaround for the incorrect Serial API Setup Sub Command bitmask encoding in 700 series sticks with a firmware of 7.15 or higher
  • Rename consumed/produced in meter labels to consumption/production

Config file changes

  • Add fingerprint 0xa803:0x1352 to McoHome A8-9
  • Add Neo Coolcam NAS-PD07Z Motion Sensor 5in1
  • Add NIE Tech / Eva Logik ZW96
  • Add Aibase A19 LED Bulb
  • Add Aibase Water Leak Sensor
  • Add templating and remove unnecessary parameters
  • Add device identifier for MCOHome MH10-PM2.5
  • Add missing parameters to Zooz ZEN15
  • Add fingerprint 0x1301:0x4001 to "Fibargroup FGT001"
  • Add Nortek WO15EMZ5
  • Correct units for Fibaro FGS-224 and FGS-214 params 154 and 155
  • Update Philio PSM02 Configuration
  • Use unsigned for config parameters setting Basic Set levels
  • Add fingerprint to Fakro ZWS230
  • Add fingerprint to OOMI Color Strip
  • Disable Basic CC mapping for Eaton/Aspire RFWC5
  • Add fingerprint to Popp & Co POPE700342
  • Update Philio PST02A and PST02B to use partial config parameters (5, 6, 7)

Changes under the hood

  • Fixed a bug in ConfigManager tests that led to a folder with name undefined being created

8.3.1 (2021-09-14)

Config file changes

  • Add fingerprint 0xaa00:0xaa02 to NIE Technology Co., Ltd. ZW31
  • Preserve root endpoint values for Everspring ST814

Changes under the hood

  • Add Node.js 16.9.1+ to the range of supported versions.

8.3.0 (2021-09-12)

Shoutout to @Ikcelaks and @IvanBrazza, who've contributed the main features in this release!

Features

  • Support reacting to SupervisionCC::Get
  • Add setting dimmingDuration for Scene Actuator Configuration CC with setValue API
  • Add setting dimmingDuration for Scene Controller Configuration CC with setValue API

Bugfixes

  • Correctly determine the capabilities of endpoints during Security S2 interview

Config file changes

  • Enable basic set mapping for ZWN-BPC variants
  • Force Multilevel Switch CC to be supported in MCOHome MH-C221
  • Add product ID for EU version of Ring Contact Sensor v2
  • Remove Z-Wave Plus CC from GE 14318
  • Add product id 0x0103 to Aeotec ZW141
  • Add Minoston mp21zp config file
  • Add fingerprint to Logic Group ZSO7300
  • Reduce parameter 9's minValue to 0 for Zooz ZEN24 4.0

Changes under the hood

  • Node.js 16.9.0 causes crashes in testing, so we cannot verify that Z-Wave JS works correctly with it. Until that bug is fixed, we've removed Node.js 16.9.0 from the range of supported versions.

8.2.3 (2021-09-06)

Bugfixes

  • Interpret wait time after firmware update as seconds, not milliseconds
  • Fall back to interpreting OTA/OTZ firmware files as binary, if they aren't in Intel HEX format
  • Guard against invalid inclusion strategies, log which one was chosen

Config file changes

  • Add fingerprint 0x0005:0x0112 to "Fakro AMZ Solar"
  • Add config for Minoston MP21ZD
  • Add metadata + units to Namron Z-Wave Dimmer2 400W
  • Add metadata to Namron Z-Wave Dimmer 400W
  • Correct Aeotec ZWA011 and ZWA012 parameters
  • Add Zooz ZAC36 water valve
  • Add support for HE-TPS05
  • Add support for FGWCEU-201

Changes under the hood

  • Documentation: Mention that an option for S0 only inclusion must exist
  • Updated some dependencies

8.2.2 (2021-09-02)

Bugfixes

  • Handle missing S2 keys more gracefully

Config file changes

  • Disable strict entry control validation for Ring Keypad v2
  • Add HeatIt Z Push Button 2
  • Add support for Zipato PH-PSE02
  • Add new Zooz devices ZSE41/ZSE42; fix ZEN15 parameter 30
  • Clean up config file for FGFS-101
  • Add support for Namron Dimmer 400W

Changes under the hood

  • Upgrade to TypeScript 4.4

8.2.1 (2021-08-25)

Bugfixes

  • Fixed an invalid definition in the sensor types configuration file

Config file changes

  • Add fingerprint for Fibaro FGFS

8.2.0 (2021-08-25)

Features

  • Add new ConfigManager properties to expose the remaining config maps

Bugfixes

  • Print less intimidating logs for missing S2 keys during decryption
  • Clarify error messages in the log when S0/S2 keys are missing
  • When converting pre-8.1 cache files, treat the nodes as not having any S2 security classes

Config file changes

  • Add fingerprint to Ring 1st Gen Range Extender config
  • Cleanup device file for Fibaro button
  • Add metadata to Nortek devices
  • Correct ZWA012 parameters indexing
  • Add association config for Vision ZM1701
  • Update Hank Electronics devices

Changes under the hood

  • Move more scale definitions into scales.json

8.1.1 (2021-08-17)

Bugfixes

  • Added a missing | undefined to the deprecated beginInclusion signature
  • Fixed a check when replacing a node with another one that should use encryption

8.1.0 (2021-08-15) · „Hell, it's about damn time”

Features

Just one, but it's a big one: We added support for Security S2 inclusion and singlecast communication 🎉.
As it looks like, Z-Wave JS is the first open source library to support Security S2.

If you plan to add support in your application, see the documentation and PR description for details - this also requires UI changes.

Bugfixes

  • The firmware target selection for targets other than 0 no longer incorrectly complains about an incorrect target
  • Avoid writing into node_modules when updating an external configuration directory
  • When an endpoint shares its lifeline with the root (i.e. has 0 max. associations), the root's associations are now ignored when determining how the endpoints's associations should be configured

Config file changes

  • Add another product ID variant to Yale YRD210
  • Update and cleanup Fibaro Walli Double Switch
  • Preserve root endpoint values for TZ06
  • Allow manual entry for Zooz ZSE11 Param 12
  • Add missing fingerprint to MCOHome MH9-CO2-WD
  • Fix Heltun HE-RS01 parameters 41-45

8.0.8 (2021-08-04)

Bugfixes

  • The firmware target selection for targets other than 0 no longer incorrectly complains about an incorrect target

Config file changes

  • Add Silabs UZB3 500 series controller device
  • Correct parameter 81 for Aeotec ZW100
  • Add MCO Home MH5-2a and MH-S510, correct others
  • Updates to Fibaro FGS223 and FGD212
  • Add groups for Heatit Smoke Battery
  • Add support for HELTUN HE-HLS01, HE-HT01, HE-RS01
  • Update Fibaro FGT001 for v8 changes, preserve root and endpoint 2
  • Map root reports to endpoint 1 for Fibaro FGS211/221
  • Add option 11 to ZEN17 parameters 2 and 3
  • Update non-device configs (indicators, notifications, ...) to certification package 2020C

8.0.7 (2021-08-02)

Bugfixes

Improved the heuristic for lifeline associations, which should resolve some reporting issues with devices:

  • If the root endpoint of a device is configured to use a node association, the fallback for the other endpoints no longer creates a multi channel association on the root endpoint
  • If the endpoints of a multi channel device don't support associations, the default lifeline on the root device will be configured as a multi channel association

Config file changes

  • Correct values sizes for zw096/zw099
  • Correct device file for Ecolink ISZW7
  • Preserve root endpoint values for Aeotec DSB09

8.0.6 (2021-07-28)

Bugfixes

  • The detection whether a config file is considered embedded or user-provided now takes ZWAVEJS_EXTERNAL_CONFIG into account.
  • Improved the error message when the cache directory cannot be written to
  • Avoid overwriting the .json cache file with empty data on shutdown
  • Removing associations from non-multichannel groups now works correctly
  • The endpoint device class is now stored correctly when all endpoints have identical capabilities
  • Fixed a crash that happened when trying to determine if all endpoints are the same device class and the device class hasn't been stored before
  • Added missing metadata definitions to Version CC fields

Config file changes

  • Add NAS-PD03Z Motion Sensor 3
  • Template other Shenzhen Neo motion sensors
  • Map root reports to endpoint 1 for CT101
  • Add missing LED Light param to GE/Jasco 46202 and 14292
  • Add missing param and metadata for GE/Jasco 46203
  • Add fingerprint to Aeotec ZWA009

Changes under the hood

  • Added regression tests for this oddysey of config loading fixes
  • Added a bot command to add new fingerprints to existing config files

8.0.5 (2021-07-22)

Bugfixes

  • Fixed $import validation logic for device config files from the ZWAVEJS_EXTERNAL_CONFIG dir
  • Always treat 1-bit partial parameters as unsigned

Config file changes

  • Add fingerprint for Heatit Smoke battery

Changes under the hood

  • Fixed some bot scripts that broke when switching to yarn

8.0.4 (2021-07-21)

Bugfixes

  • Multicast/Broadcast start/stopLevelChange now also works correctly via the setValue API
  • Fixed validation logic for the firmware update target to accept target 0 again
  • Fixed $import validation logic for device config files from the deviceConfigPriorityDir

8.0.3 (2021-07-20)

Bugfixes

  • Corrected the interview order of non-application CCs vs. application CCs on the root endpoint

8.0.2 (2021-07-20)

Bugfixes

  • When creating the fallback endpoint association on the root endpoint, an existing node association is now removed first

8.0.1 (2021-07-20) · „There are things out there that our little minds will never comprehend...”

...one of them being the Z-Wave specifications.
— H. G. Tannhaus (from „Dark”, probably)

Jokes aside, I'd like to use this release as an opportunity to look back on the history of Z-Wave JS. I started this project in 2018 out of frustration with the state of the open source Z-Wave ecosystem. I'm sure this sounds familiar to you if you're reading this. Little did I know what I was getting myself into. Originally, I just needed something that works for me, but decided to share it with the world.

Well, here we are. After...

  • almost 3.5 years,
  • over 4000 commits by over 150 contributors (including some bots),
  • about 2 million additions and deletions,
  • reading over 2000 pages of cryptic specifications
  • millions of log lines,
  • and investing more time that I feel comfortable knowing about,

I'm starting to understand why there are so few (good and open source) Z-Wave drivers available.

Nonetheless, Z-Wave JS is picking up momentum and is getting used used more and more, both by open source and commercial projects. A while ago, we added usage statistics (opt-in), so we have at least some idea of how many people are using Z-Wave JS. As of today, Z-Wave JS is powering over 5,000 Z-Wave networks all over the world with over 70,000 devices (that we know of).

This wouldn't have been possible without all the support I've gotten so far. I'd like to thank everyone who has supported me over the years, both financially and by contributing. A big shoutout is especially due to

What's next?
With this v8 release, most of the pain points from previous versions and concerning compatibility with legacy Z-Wave devices should finally be resolved. This opens up the opportunity to focus on new and exciting features. On that list are the long-awaited Security S2, SmartStart and eventually the new Z-Wave Long Range.

Road to certification
As you may already know, if you're planning to market a product or software with the official Z-Wave logos, certification is required for the entire product, from the hardware over the driver to the UI. In its current state, Z-Wave JS is not yet ready for certification (neither are the alternatives, for that matter). If your company is relying on Z-Wave JS, please consider paving that road by contributing to the project and/or sponsoring me. I'd love to be able to work full-time on Z-Wave JS and make it the first certified open source Z-Wave driver. While Z-Wave JS is free, your support will allow me to continue to make it better and reach that goal even faster.

TL;DR: Z-Wave JS rocks! You rock! Now let's take a look at the changelog...


Breaking changes · Migration guide

  • User codes are no longer queried during the interview in order to save battery
  • Restructured interview settings in ZWaveOptions
  • Reworked how endpoints and lifeline associations are handled
  • Removed neighbors property from ZWaveNode class and removed InterviewStage.Neighbors
  • Added missing node argument to nodes' "statistics updated" event
  • The minimum required Node.js version is now v12.22.2
  • The repository has been migrated from yarn v1 to yarn v3. This changes a few things, mainly regarding installing dependencies and editor support and might require manual intervention after updating the repo.
  • Change secondary exports to package.json subpath exports
  • Both fields in BatteryHealthReports may be undefined

Features

  • Support invokeCCAPI and supportsCCAPI on virtual nodes/endpoints (multicast/broadcast)
  • Added node method getFirmwareUpdateCapabilities to check which features of the Firmware Update CC a node supports before attempting the update
  • Add support for receiving Transport Service CC V2 encapsulated commands

Bugfixes

  • Improved error messages that explain why a firmware update failed
  • Multicast/Broadcast setValue now also accepts an options object
  • start/stopLevelChange now correctly works for multicast/broadcast
  • Added typesVersions to zwave-js/package.json, so TypeScript finds the subpath exports when used from consuming applications
  • The endpointIndizes value is now correctly marked as internal

Config file changes

  • Add Heatit ZM Single Relay 16A
  • Add metadata to Evolve products
  • Add config file for Aeotec ZWA011

Changes under the hood

  • Updated several dependencies
  • Config files can now use the ~/ prefix to refer to the config directory root

7.12.1 (2021-07-17)

Bugfixes

  • Fixed a bug where healNode on an non-existing node would block further heal attempts

Config file changes

  • Add Z-connect garage door controller
  • Correct fingerprints for two Sunricher dimmers
  • Add metadata to Leviton devices and improve param definitions
  • Fix value size for Aeotec ZWA023 params 23 through 2
  • Correct Aeotec ZWA005 parameter numbers

7.12.0 (2021-07-14)

Features

  • The volume (for the Sound Switch CC) can now be passed as a setValue option

Bugfixes

  • Fixed a crash that happened when the driver tried to update statistics before the controller interview

Config file changes

  • Preserve root endpoint values on Fibaro RGBW 441
  • Allow manual entry for tone duration for Aeotec Doorbell and Siren
  • Add config file for MCOHome A8-9
  • Update MP20Z config file
  • Correct device fingerprint for Kwikset 912

Changes under the hood

  • Nightly config releases now ignore changes outside the packages directory when determining if a new release can be made

7.11.0 (2021-07-05)

Features

  • Added invokeCCAPI to the Endpoint class, which allows to generically/dynamically invoke CC API

Device compatibility

  • The compat flag treatDestinationEndpointAsSource now also affects outgoing multi channel commands

Config file changes

  • Update Fibaro FGD212 configuration
  • Add fingerprint to Kwikset 910
  • Correct valueSize for param 64 on Aeotec ZW100 / Fantem FT100
  • Add param 19 and metadata for GE/Jasco 46201

Changes under the hood

  • Telemetry now includes Node.js version, OS and arch
  • Switched from Dependabot to Renovate

7.10.1 (2021-06-30)

Bugfixes

  • Config updates in Docker now download the tarball from the npm registry and extract it instead of deferring to the package manager
  • controller.getAssociationGroups now returns the correct association group label when a config file has definitions for multiple endpoints and Association Group Info CC is not supported

Config file changes

  • Remove Supervision support from zwaveproducts.com WD-100

Changes under the hood

  • Our issues now use the new Github Issue Forms to give better guidance when opening issues

7.10.0 (2021-06-28)

Features

  • Value metadata can now include a property valueChangeOptions that indicates which option properties are respected when changing the value with node.setValue.

Bugfixes

  • When an invalid CC is dropped, the reason should now be logged aswell
  • Update winston-daily-rotate-file to our forked version to fix a crash

Config file changes

  • Templated and cleaned up more Aeotec device configurations
  • Added support for clearing inovelli notifications
  • Fixed incorrect partial parameters 41, 49, and 50 of Aeotec ZW100
  • Force Binary Switch CC to be supported for Everspring HAC01

Changes under the hood

  • Added a previously forgotten note about the statistics feature to the changelog for version 7.9.0

7.9.0 (2021-06-22)

Features

  • Add the ability to pass options (like a transition duration) to setValue API calls
  • Add options to configure the preferred sensor scales
  • Implemented statistics events for the controller and individual nodes to get some insight into the traffic and connection health

Bugfixes

  • Upgrade JsonlDB to try and handle the (hopefully) remaining edge cases that can lead to cache corruption

Config file changes

  • Define association groups for multiple Jasco devices
  • Add treatBasicSetAsEvent compat flag to multiple Evolve devices

Changes under the hood

  • Parallelize documentation generation
  • The documentation now highlights better when to use sentence case vs. title case

7.8.0 (2021-06-20)

Features

  • The firmwareVersion property for the controller node now returns the serial API version
  • Support bulk-setting, bulk-getting and bulk-resetting configuration parameters, handle partial parameters automatically

Bugfixes

  • Detect serial disconnection, destroy driver on serial/socket failure
  • V1 alarm metadata is now created on demand, even if the device claims it does not support V1 alarms

Config file changes

  • Add compat flag to treat destination endpoint as source, apply to Greenwave GWPN6
  • Add alarm mapping for First Alert ZCOMBO
  • Add missing param 1 config option to Jasco 35931
  • Add additional association groups for Elexa/Dome Home Automation Products
  • Add additional productID for the Yale YKFCON
  • Update Nortek Device Configs
  • Add fingerprint to Kwikset 912

Changes under the hood

  • Handle internal and filename-less stack traces in Sentry filter

7.7.5 (2021-06-16)

Bugfixes

  • Nodes are no longer sent to sleep while a scheduled verification poll is pending
  • Simultaneous config DB updates are now prevented with a lockfile

Changes under the hood

  • The build process now uses ESBuild instead of ts-node and gulp
  • Replaced the moment package with the much smaller Day.js
  • Removed the moment-timezone package
  • Security updates to some dependencies
  • Added Node.js 16 to the testing suite

7.7.4 (2021-06-14)

Bugfixes

  • Don't require V1 alarms to be supported to preserve legacy alarm values
  • Correct the error message for incompatible config value when setting partial params
  • Signed partial config parameters are now decoded correctly
  • Simplify Aeotec firmware extraction method and support non-aligned files

Config file changes

  • Rename primary association groups to "Lifeline" for Yale Door Locks
  • Enable auto-idling notifications for MH9-CO2
  • Add additional product ID for Leviton VRCS1
  • Add additional product ID for Leviton VRP15, add config param
  • Add Alarm Mapping to Yale YRD120, YRD220, YRL210, and YRL220
  • Add Neo Coolcam Motion Sensor 2
  • Mark parameters with high bit as unsigned for MIMO2+
  • Correct identification of Enerwave ZWN-RSM / ZWN-RSM-Plus variants

Changes under the hood

  • Correct label in MeterGet logging

7.7.3 (2021-06-08)

Bugfixes

  • The commandClasses.add and commandClasses.remove compat flags are now applied at the appropriate CC interview steps
  • When determining an endpoint's CC version, the root endpoint's version is always checked as a fallback
  • When an unknown notification contains V1 alarm values, those are now preserved
  • Metadata for Notification CC V2 values is now created when a corresponding report is received

Config file changes

  • The "state after power failure" settings are now templated
  • Force-add support for Multi Channel CC to UFairy GR-B3-3
  • Add GE/Jasco/Enbrighten 14296
  • Update default values for Zooz ZSE40

Changes under the hood

  • Updated dependencies
  • In case of a missing configuration, the device configuration DB is now queried before reporting it via telemetry to eliminate false positives

7.7.2 (2021-06-06)

Bugfixes

  • The external config directory defined with the env variable ZWAVEJS_EXTERNAL_CONFIG is now created when it doesn't exist

Config file changes

  • Added additional product ids to some Fibaro devices
  • Added parameters for primary and secondary strobe to Wink Siren
  • Add treatBasicSetAsEvent compat flag to Aeotec ZW132
  • Define partial parameters for Fibaro FGT001, add additional parameters for MH9 CO2
  • Add a config file for Leviton RZI10-1L

7.7.1 (2021-05-29)

Bugfixes

  • Use lock files to limit access to Value DB to a single instance, do not auto-compress on startup. This should avoid cache corruption when the driver is restarted multiple times in a short time
  • Fixed an error during Multi Channel Association CC when Association CC is not supported

Config file changes

  • Remove auto-assignment to Motion Sensor group from Fibaro FGMS001
  • Add Sunricher ZV9001K4-RGBW

Changes under the hood

  • Include command name in "invalid CC" logs

7.7.0 (2021-05-27)

Features

  • Add APIs to read and write external NVM
  • Add API to toggle Z-Wave radio on/off
  • Partially decode dropped commands and give insight by logging them as good as possible

Bugfixes

  • Fixed a crash that could be caused by loading device configuration files with conditions when a node's firmware version is unknown

Config file changes

  • Remove invalid device ID for MINI KEYPAD RFID

7.6.0 (2021-05-26)

Features

  • Add multicast support to Configuration CC
  • Add isHealNetworkActive property to controller

Bugfixes

  • Change GED2150 config file extension to json, so it gets picked up
  • Fixed typo in error message for "invalid condition"

Config file changes

  • Add additional version of Eaton 5-Scene Keypad
  • Correct parameter label for Aeotec DSC11
  • Added support for Sunricher ZV2835RAC-NF
  • Update Honeywell TH6320ZW2003 and add template

Changes under the hood

  • Enforce hex keys in config files to be lowercase

7.5.2 (2021-05-25)

Bugfixes

  • VirtualEndpoint and VirtualNode are now exported through zwave-js and zwave-js/Node
  • After a supervised Multilevel Switch::Set with targetValue 255, the currentValue is now refreshed
  • The compat flag disableStrictEntryControlDataValidation now also disables the sequence number validation for Entry Control notifications
  • When a V1 alarm report is mapped to a V2+ notification, the alarm values alarmType and alarmLevel are no longer deleted. This should avoid breaking changes when we add a new mapping.
  • A failed transmission of a NonceReport is no longer retried and no longer has an influence on the device status
  • Avoid setting the device clock too often
  • Avoid multiple value refreshes when a node hails multiple times

Config file changes

  • Add additional device ID to CT101 thermostat
  • Add support for Weiser SmartCode 5
  • Added a new product ID for iblinds V3.10+
  • Corrected some Logic Group config files
  • Add GED2150 config
  • Enable Basic Set mapping for Everspring HAC01
  • Enable Basic Set mapping for Aeotec ZW100 and Fantem FT100

Changes under the hood

  • Document ping method for nodes

7.5.1 (2021-05-22)

Bugfixes

  • Check support for Association CC before using it in Multi Channel Association CC interview and aborting it
  • Improve logging for Notification CC
  • The module exports zwave-js and zwave-js/CommandClass now export all CC classes
  • Basic CC is now also hidden in favor of better CCs when restoring the network from cache
  • Fixed how the supported CCs for each endpoint are computed in Multi Channel CC V1

Config file changes

  • Corrected partial paramaters in Philio Technology Corp PST02-C
  • Fix wording of Zooz ZEN22 switch/dimmer led parameter
  • Aligned Fantem FT111 to original Aeotec config
  • Add languages to Ring Keypad v2

Changes under the hood

  • Workflows in PRs from first-time contributors are now regularly auto-approved if they only edit config files until GitHub figures out how to make this "feature" less tedious
  • Added a bot command to add compat flags to existing files (limited to collaborators with write access)

7.5.0 (2021-05-17)

Features

  • CC API methods that accept a duration now also accept user-friendly strings like 2m5s and 60s instead of only Duration class instances
  • Configuration files may now define association groups on endpoints
  • Successful multicast commands now optimistically update the CC values
  • Successful multicast commands now verify the current value if the target value is 255

Bugfixes

  • Disconnection of a serial-over-TCP socket is now detected and destroy the driver instead of silently failing
  • Ensure the external configuration directory exists
  • Prevent congestion through delayed wakeup compat queries to sleeping nodes

Config file changes

  • Corrected lifeline label for Aeon ZW100
  • Aligned Fantem FT100 Motion with ZW100
  • Add additional device ID to Wenzhou ZW15S
  • Add support for Namron Dimmer 2 400W
  • Enable Basic Set mapping for EverSpring SP103
  • Align Fantem Door Window Sensor to Aeotec files
  • Add Zooz ZEN73/ZEN74; minor fix to importConfig.ts
  • Corrected lifeline label on Aeotec ZW112
  • Corrected param 8 for Aeotec DSB28
  • Corrected labels of power related params for Aeotec DSC11
  • Add keypad mapping to Yale Conexis L1
  • Several warnings were fixed in config files

Changes under the hood

  • Reduced boilerplate for writing configuration files:
    • readOnly and writeOnly default to false and must now be omitted if they are not true
    • allowManualEntry is now optional and defaults to true unless the parameter is readOnly. This must be omitted or false.
  • The CC API documentation now mentions the numeric CC identifier
  • The noEndpoint property for associations in config files has been renamed to multiChannel and its meaning was reversed.
  • The leading comments at the start of config files were removed

7.4.0 (2021-05-10)

Features

  • Implement get/setPowerlevel, get/setRFRegion controller methods
  • Auto-enable TX status reports for later use in the driver
  • Add controller.getNodeNeighbors method, deprecate node.neighbors property
  • Define external config DB location with ZWAVEJS_EXTERNAL_CONFIG environment variable
  • Added the property deviceDatabaseUrl to ZWaveNode instances which includes the URL of a device's entry in the device database
  • Improve network healing strategy to avoid congestion. Healing now happens one by one, topologically, starting from the controller's neighbors. Listening nodes are prioritized over sleeping nodes.
  • Added daily log rotation for log files

Bugfixes

  • Avoid polynomial regex in isPrintableASCIIWithNewlines
  • Validate that mandatory CCs make sense before appying them to nodes or endpoints
  • Eliminate @zwave-js/maintenance devDependency from packages
  • Query Version CC version before relying on it
  • Updating the embedded config now uses the --production flag for npm install and yarn install
  • Fixed a driver crash when the SerialAPISetup command is not supported
  • Fixed a driver crash during Association Group Information CC interview when a group has no members

Config file changes

  • Disable supervision for ZL-PD-100
  • Fix typos in ZTS-110
  • Add additional identifier for FGKF-601
  • Update Devolo Siren param 31
  • Add additional identifiers for FGWP102
  • Cleanup and template Aeotec configurations (part 3)
  • Add new power reporting parameter to ZEN25
  • Update zw97 device config for 2nd gen EvaLogik hardware
  • Remove Popp 701202 FW version limits
  • Add PoPP 10-Years Smoke Detector Without Siren
  • Update ZSE11 with ZWA import
  • Add Ring contact sensor v2
  • Add Ring Keypad v2
  • Add compat flag preserveRootApplicationCCValueIDs to zen20
  • Add FGFS-101 v3.4 productId
  • Add Clamp 3 meters to DSB28, fix bitmask
  • Add Ring Motion Sensor Gen2
  • Add config file for Nice IBT4 BusT4
  • Change Aeotec Minimote config to writeOnly
  • Add zso7300 to logic group
  • Add Ring Outdoor Siren
  • Add new variant of param 52 for LZW31-SN v1.54+
  • Remove duplicate association group for Shenzhen Neo AB01Z
  • Add associations and double tap to GE 12729

Changes under the hood

  • When linting config files, conditions are now correctly considered
  • Allow $import-ing from partial parameters in config files

7.3.0 (2021-04-29)

Features

  • Added a driver option to specify a user-defined directory to prioritize loading device config files from. This can be used to simplify testing and developing new configs.
  • When a value is updated either by polling or through unsolicited updates, pending verification polls are canceled now. This reduces traffic for nodes that report status changes on their own.
  • Experimental support for updating the embedded configuration files on demand
  • Support firmware updates with *.hec files
  • Added a method to get all association groups of a node and its endpoints
  • Associations can now also be managed on the endpoints of a node. Several method signatures were revised and the old versions are deprecated now. See PR #2287 for details.

Bugfixes

  • Basic CC values are now correctly persisted when requested using the Basic CC API. This also avoids incorrectly detecting devices as not supporting the Basic CC.
  • ObjectKeyMap and ReadonlyObjectKeyMap are now iterable
  • The controller can no longer be re-interviewed with refreshInfo
  • Handle error when logging a Notification CC Report before the config is loaded
  • Consider custom transports to determine loglevel visibility

Config file changes

  • Add forceNotificationIdleReset compat flag to Aeotec MultiSensor Gen5
  • Add load sense to Evolve LDM-15W
  • corrected style in Nortek PD300Z-2
  • Remove Group 2 Lifeline attribute for Aeotec ZW098
  • Minor improvements to zen32 configuration
  • Widen firmware range for Popp Solar Siren 2
  • Add compat flag to GE zw3008 to re-enable basic command events to replicate central scene functionality
  • Add new configuration for PIR-200 Motion Sensor
  • MCOHome configuration changes
  • Correct LZW31-SN dimming and ramp labels
  • Update Aeotec ZW095 config
  • Correct Linear wd500z
  • Correct Nortek wd500z
  • Correct alarm mapping for Yale YRD210
  • Add compat flag to LZW36
  • Add RU product ID to Wintop 82 iDoorSensor
  • Force auto-idling for ZG8101 notifications
  • Override reported Multilevel Switch version for MH-C421
  • Template Logic Group configuration files
  • Add compat flag to remove supervision from homeseer HS-WD100+
  • Correct manufacturer name for MP20Z
  • Add namron 4 channel and fix 1+2 channel switch
  • Fix ZW117 group label
  • Add enableBasicSetMapping compat flag to SM103
  • Add Fibaro outlet FWPG-121 (UK version)
  • Map Basic Set to Binary Sensor Reports for Fibaro FGK101
  • Add battery low mapping to Kwikset locks
  • Make invert switch parameter writable on Nortek WD500Z-1, Linear WD500Z-1 and Evolve LRM-AS

Changes under the hood

  • Update several dependencies
  • The Github Bot can now import device files from the Z-Wave Alliance Website

7.2.4 (2021-04-16)

Bugfixes

  • Adding associations to the controller with arbitrary target endpoints is no longer an error
  • Add node requrests for a node with ID 255 are no longer handled
  • When reacting to locally reset node, don't try to mark it as failed twice
  • Do not override internal log transports with configured ones

Config file changes

  • Update Remotec ZXT-600 config
  • Add NIE Tech / Eva Logik ZW97
  • Make parameter #5 firmware dependent for Zooz ZSE40
  • Enable Basic Set Mapping for ZP3102
  • Cleanup and template Aeotec configurations (part 2)
  • Add Zooz ZSE11
  • Preserve Basic CC for Popp rain sensor
  • Update Radio Thermostat CT101 config
  • Device configuration files may now contain wakeup instructions
  • Add Qubino Smart Leak Protector
  • Fix incorrect selective reporting labels for aeon home energy meters
  • Correct Evolve LRM-AS
  • Add parameter 32 to GE/Jasco 46203

7.2.3 (2021-04-13)

Bugfixes

  • The nodeFilter logging option is now correctly applied to value change logs
  • Fixed an issue where unsuccessful SendData[Multicast]Bridge requests would not cause the transaction to be rejected. This caused removeFailedNode and replaceFailedNode commands to not work on sticks supporting the Bridge Controller API
  • Existence of endpoints is now based on the known endpoint indizes instead of just the total count
  • Non-root endpoints may no longer support Multi Channel CC, even if their device class indicates so
  • The Multi Channel CC interview is now skipped for non-root endpoints

Config file changes

  • Add Haseman RS-10PM2
  • Improve config for Remotec zxt-310
  • Correct report type label for Aeotec devices
  • Synchronize Philio PAN04 configuration with manual

Changes under the hood

  • When rate-limited, the statistics reporter now tries again after the time indicated by the statistics backend

7.2.2 (2021-04-11)

Bugfixes

  • Block subsequent destroy() calls instead of returning immediately. This should avoid cache corruption when the zwavejs2mqtt Docker container shuts down.
  • Fix error: Cannot translate a value ID for the non-implemented CC _NONE

Config file changes

  • Enable Basic Set mapping for FGBS001
  • Add options to device status after power failure for hank switch
  • Add checks for duplicated option values and eliminate them
  • Correct min value for Aeotec "Motion Sensor Timeout" options

7.2.1 (2021-04-10)

Features

  • Added methods to manage SUC return routes and automatically promote the controller to SUC/SIS if possible and necessary

Bugfixes

  • Restored the pre-7.1.x behavior of mapping reports from the root device to the first supporting endpoint
  • Thermostat Fan Mode API now uses the correct CC for its commands
  • Treat transaction failures due to a removed node as recoverable
  • Make sure each node has a return route to the SUC

Config file changes

  • Map alarmLevel to userId for Yale locks
  • Map Basic CC::Set to Binary Sensor for WADWAZ-1 and WAPIRZ-1
  • Add additional product ID to Fibaro FGS-224
  • Add compat flag preserveRootApplicationCCValueIDs to ZEN16, 17, 25
  • Update FGRGBW-442 config

7.1.1 (2021-04-06)

Changes under the hood

  • Usage statistics now use a random 32 byte value to salt the HomeID hash

7.1.0 (2021-04-05)

Features

  • Added the driver option disableOptimisticValueUpdate to opt-out from optimistic currentValue update
  • More lock/unlock events are now mapped to the (Door) Lock CC status
  • Implemented the Bridge API versions of SendData[Multicast] commands and prefer them over the Static API variants if supported
  • Added the node events interview started and interview stage completed to monitor progress of node interviews.
  • Implemented opt-in telemetry for usage statistics. Dear developers, please strongly consider enabling this feature to help us focus our efforts. Details can be found here and here.
  • Added the device compat option enableBasicSetMapping to opt-in to mapping Basic CC::Set commands to other CCs

Bugfixes

  • Add missing exports for Message class
  • Minimize automatic interaction with manual wakeup nodes, which might not be awake long
  • Shut down gracefully if the serial port is suddenly not open
  • Handle CC_NotSupported and other "freak" errors during node bootstrapping
  • Avoid pinging between ProtocolInfo and NodeInfo interview stages if the node status is known
  • Fixed an issue that caused the Multilevel Sensor CC interview to do nothing if V5 is supported by the node
  • Fixed a crash: supportedCCs is not iterable. Added a workaround for crashes caused by the previous fix.
  • Notification variables are no longer automatically set to idle after 5 minutes. If a device does not send idle notifications, the compat flag forceNotificationIdleReset must now be enabled in the configuration files.
  • ConfigurationMetadata is now part of the ValueMetadata union type.
  • Changes to the loglevel now work correctly on the fly

Config file changes

  • Removed compat flag preserveRootApplicationCCValueIDs from Zooz Zen16/17 again
  • Fixed typo in Zen32 configuration

7.0.1 (2021-03-27)

Bugfixes

  • Abort interview attempt when endpoint query times out
  • Don't log TODO when receiving SceneActivationCC::Set commands
  • Don't map BasicCC::Set to other CCs
  • Don't map reports from the root device to endpoint if it is ambiguous, allow opt-in with compat flag (reverted in 7.2.0)
  • Add space between number and unit when logging durations
  • Treat controller timeout as an expected error in more locations instead of throwing

Config file changes

  • Add compat flag to zen17 and zen16; fix zen17 config
  • Cleanup and template Aeotec configurations (part 1)
  • Update Inovelli LZW60 device to better match upstream documentation
  • Add Namron 200W LED dimmer
  • Add alarm value mapping for Kwikset 888
  • Remove Supervision CC from Inovelli LZW36 due to firmware bug

Changes under the hood

  • Collect telemetry information for identified devices without a config file

7.0.0 (2021-03-23) · Summer is coming!

Breaking changes · Migration guide

  • Renamed controller.removeNodeFromAllAssocations to controller.removeNodeFromAllAssociations to fix a typo
  • We've reworked/fixed the parsing of Node Information Frames (NIF) to match the specifications and changed node properties to make more sense
  • Nodes with a completed interview are no longer queried for all their values when restarting
  • The deltaTime and previousValue values for the Meter CC are no longer exposed
  • Numeric loglevels are converted to the corresponding string loglevel internally. driver.getLogConfig always returns the string loglevel regardless.
  • The "notification" event was decoupled from the Notification CC and now serves as a generic event for CC-specific notifications.

Features

  • The logger formats were more cleanly separated between logger and transport instances. As a result, writing user-defined transports is now much easier.
  • Implemented a logfmt transport in https://github.com/zwave-js/log-transports
  • Added support for Entry Control CC. It has been found that some entry control devices don't follow some of the strict rules regarding the data format. The validation can be turned off with the compat option disableStrictEntryControlDataValidation.
  • Implemented an API to re-interview a single CC on a node and its endpoints without repeating the entire node interview
  • The stack of ZWaveErrors related to transmission errors now contain the call stack where the message was created instead of the internal state machine's stack
  • Added a compat option alarmMapping to map unstandardized V1 alarm values to standardized V2 notification events
  • Use the new compat option alarmMapping in Kwikset and Yale locks
  • Moved the deviceClass property from ZWaveNode to its base class Endpoint and consider the endpoint's device class where necessary

Bugfixes

  • Changes to the logger configuration are now correctly applied dynamically
  • Changed how an error gets identified as a ZWaveError to avoid problems with duplicated dependencies
  • Writeonly parameters are no longer queried even if Configuration CC has version 3 or higher
  • Fall back to slow refresh behavior on Central Scene CC V2 if a delayed key up is detected
  • Handle incorrectly zero-terminated strings in name reports of Association Group Info CC
  • Allow healing single nodes
  • Manually requesting a re-interview while another one is still in progress no longer causes multiple interviews to happen in parallel

Config file changes

  • Add missing Sunricher device configs
  • Mark Alarm Sensor as not supported on FGBS001
  • Add Fakro ZWS230 chain actuator
  • Add RU version of ZW100 (FW 1.10)
  • Distinguish Popp Flow Stop valve versions 1 and 2
  • Add undocumented parameter 6 to ZW3104
  • Minor update for some Inovelli switches and dimmers

Changes under the hood

  • Added a missing callback function to the quick start example
  • Added an API to ConfigManager to look up device configurations without evaluating the conditionals

6.6.3 (2021-03-16)

Bugfixes

  • Avoid crash during bootstrapping when Version CC is not in the NIF

Config file changes

  • Split LZW31-sn param 16 and normalize param names
  • Separate Neo CoolCam NAS-WR01ZE V2 from WR01Z

6.6.2 (2021-03-14)

Bugfixes

  • While replacing a node with replaceFailedNode the node does not get removed from associations anymore. This could prevent secure inclusion from succeeding.
  • Notification variables are now auto-idled after 5 minutes as it was intended, not after 5 hours.
  • Fixed a typo in the logging for Association CC

Config file changes

  • Added Leviton 4 Speed Fan Controller zw4sf
  • Added russian versions of several Shenzhen Neo devices
  • Update Qubino Smart Plug 16A, parameter 41 does not exist
  • Update LZW30 parameters to match documentation/latest firmware
  • Change misidentified device sm103 to hsp02
  • Remove unsupported double tap on GE 26932; add double tap to 12730; fix parameters
  • The config file for 700-series controllers released with the base chip from Silabs is * now more generic
  • Add param 52 to Gocontrol GC-TBZ48
  • Add config for Haseman R4D4
  • Add config for YRD210 versions with an incorrect manufacturer ID
  • Improve Leviton dzpd3 parameter metadata and add device metadata
  • Add Ring Keypad config
  • Add config params 13 and 51 to Inovelli LZW30-SN

Changes under the hood

  • We've reworked the docs on device configuration files, including a style guide.
  • Fixed a typo that prevented the nightly configuration releases

6.6.1 (2021-03-07)

Bugfixes

  • After a restart, sleeping nodes have their status correctly determined even if they weren't interviewed completely before
  • During inclusion, sleeping nodes are no longer marked as asleep after the protocol info was queried
  • Fixed the length validation in sequenced Security S0 Message Encapsulation commands
  • Unsolicited reports from the root endpoint are now also mapped to higher endpoints when the node supports Multi Channel Association V3+
  • Fixed a crash: supportedCCs is not iterable. If this happens to you, re-interview affected devices.

Config file changes

  • Added config for Ring Range Extender
  • Updatde yrd156 inclusion, exclusion, reset instructions
  • Remove Supervision support for GE 14287 / ZW4002
  • Values for the root endpoint values of ZW132 are no longer hidden
  • Cleanup Ring Contact Sensor and Motion Sensor
  • Correct DMS01 configuration file
  • Add Zooz ZSE29 configuration parameters
  • Added lots of lightly reviewed config files from ZWA import
  • Removed invalid params 1 and 2 from Fibaro FGRM222

6.6.0 (2021-03-02)

Features

  • Added the "buffer" metadata type to distinguish binary user codes from string user codes

Bugfixes

  • The heal node callback timeout depend on the network size and node types
  • In configuration metadata, states is now also present when allowManualEntry is true

Config file changes

  • Minor corrections to Homeseer devices
  • Add additional product ID to Fibaro Roller Shutter 3

Changes under the hood

  • Lots of dependency updates
  • Refactored config files for Yale locks to use templates

6.5.1 (2021-02-26)

Bugfixes

  • When updating color components from hexColor, the value events are now emitted
  • Alarm V1 values are only created if supported
  • Fixed the detection of the notification mode of a mode instead of always skipping it

Config file changes

  • Update HeatIt Z-Smoke associations and metadata
  • Force Multi Channel CC to be supported for MH-C421
  • Add Double Tap to several GE switches
  • Add ABUS SHHA10000 configuration
  • Add Zooz ZEN17 and ZEN32

Changes under the hood

  • Several config files were refactored to use templates
  • Add method to load fulltext device index
  • Releases now pin the external dependencies to exact versions
  • defaultValue in config params is now only required if the param is writable

6.5.0 (2021-02-23)

Features

  • Implemented Scene Actuator Configuration CC
  • Updated Scene Controller Configuration CC API to match Scene Actuator Configuration CC
  • Values that could previously be "unknown" now default to undefined instead. If the distinction is relevant, the previous behavior can be restored using the driver option preserveUnknownValues.
  • Added values to Color Switch CC to set multiple color components at once (#1782)
  • Added the option nodeFilter to the logger configuration to limit logging to specific nodes

Bugfixes

  • Generating the config index no longer fails in production when single files have errors
  • Fixed a crash that could happen while logging a message while the driver is not ready yet
  • Fixed a crash that could happen while trying to bootstrap a device that does not respond after inclusion
  • The state value in Thermostat Fan Mode CC is now readonly
  • Firmware updates now disable the delayed activation feature by default
  • When updating a different firmware target than 0, the correct firmware ID is now used
  • The Fibaro CC now correctly understands unknown values.
  • Value IDs for some controlled CCs are now also exposed through getDefinedValueIDs
  • Do not map root endpoint values to all endpoints when multiple endpoints support the value
  • The device index is now preserved in memory if it cannot be written to disk
  • The unit of configuration parameters is now actually read from device configuration files
  • The list of supported and controlled CCs of a node is no longer overwritten when a device sends a NIF on manual activation
  • Add toLogEntry method to Scene Actuator Configuration CC::Set command

Config file changes

  • Added an additional Inovelli NZW31T model
  • Use Node Associations for ZW132 Lifeline
  • Added missing zero to LZW45 partial param 23 mask
  • Correct heatit brand names
  • Add Association Groups to Kwikset locks
  • Fixed an incorrect device ID assignment of Kwikset 914/c
  • Remove duplicate parameters from GED2350
  • Add Zooz zen72, update zen71 description
  • Small wording changes to flush technisat devices

Changes under the hood

  • The config files for Kwikset locks were refactored to use templates
  • Configuration files may now include conditional sections
  • A bunch of documentation updates: CC documentation, ConfigManager, API overview
  • Clarified device file requirements
  • Cleaned up the maintenance scripts that were spread out through the repo
  • Issues with incomplete templates now get auto-staled quickly

6.4.0 (2021-02-16)

Features

  • Implemented Scene Controller Configuration CC
  • Added the ability to to get the current logging configuration

Bugfixes

  • Fixed an issue where sleeping nodes could block the send queue when it is not yet known whether they support Wake Up CC

Config file changes

  • Update configuration for Zooz Zen21, Zen22, Zen26 and Zen27
  • Include LZW31 firmware 1.48 in config
  • Added another Eaton outlet to the config

6.3.0 (2021-02-14)

Features

  • Add missing specific device classes and expose Z-Wave+ Device Types through the SpecificDeviceClass class
  • Device metadata like inclusion instructions are now exposed through the DeviceConfig class
  • Added support for .bin firmware files
  • Added the ability to compose config files by importing templates
  • Add compat option manualValueRefreshDelayMs to delay the automatic refresh of legacy devices when a NIF is received
  • Implemented Thermostat Fan Mode CC
  • Implemented Thermostat Fan State CC
  • The "notification" event no longer includes a CC instance as event parameters. CC instances are first converted to a plain JS object now.
  • Added the updateLogConfig method to Driver to update logging configuration on the fly.

Bugfixes

  • It is no longer assumed that a node is included securely when it responds to a nonce request
  • .hex firmware update files with sparse data are now parsed correctly
  • Aeotec firmware updates with spaces in the firmware name are now accepted
  • Avoid infinite loops when scanning V3+ config params when the device does not use param number 0 to indicate the end of the list
  • Guard handleClockReport against crashing because of no support
  • Sleeping nodes are now immediately marked as ready when restarting from cache
  • Fixed a crash that could happen during Z-Wave+ bootstrapping
  • Fixed a crash that could happen when parsing a Node Naming And Location CC with a malformed UTF16 string
  • Unsolicited reports are no longer mapped from the root endpoint to endpoint 1 if that endpoint does not support the CC

Config file changes

  • add Inovelli NZW30T manufactured by NIE Technology
  • correct device names UFairy ZSE01/ZSE02
  • improve Kwikset support
  • improve Yale Lock support
  • improved zen22 support
  • force Binary Switch support for Qubino ZMNHDA
  • Imported several config files from the Z-Wave Alliance
  • Add compat flag treatBasicSetAsEvent to linear wt00z-1
  • Add Yale NTM625 sectional mortise lock configuration
  • Use compat option manualValueRefreshDelayMs for Leviton DZMX1
  • Move product Type/Id from CT100 to CT101
  • Add/update MCOHome config files for v5 devices
  • Fix latest firmware config for Zooz ZEN30
  • Add support for TechniSat On/Off switch flush mount, BJ
  • Add Technisat shutter-switch
  • Add LED always on to GE 46201
  • Removed descriptions from configuration options that are very similar to the labels
  • Add support for Inovelli LZW45
  • Add a config file for Homeseer HSM200
  • Update parameters for Inovelli LZW31-SN and LZW31-BSD

6.2.0 (2021-02-09)

Features

  • Added support for Barrier Operator CC
  • Notification CC Reports with a lock/unlock event are now mapped to Lock CC and Door Lock CC states.

Bugfixes

  • User Code CC V1 reports with a user code that contains only ASCII and newline characters now ignore the newlines
  • Notification CC Reports with invalid event parameters are no longer dropped completely
  • Added a workaround for Notification CC Reports with embedded User Code CC Reports that don't include the user code
  • Added another fallback for Aeotec firmware extraction

Config file changes

  • Force Binary Switch support for TKB Home TZ69
  • Add links to device manuals
  • Swap product type and id for Zooz ZEN30
  • Add support for Yale YRM276 lock
  • Reverted the removal of double tap support from some early GE devices
  • Change manufacturer and improve labels for nzw31s and nzw30s
  • Improve Zooz ZEN23 and ZEN24 toggle switch configs
  • Add ABUS SHRM10000
  • Add alternative device id for Heatit Z-Smoke 230V
  • Add support for HomeSeer HS-FLS100-G2

Changes under the hood

  • Throw better error when parsing a config file fails

6.1.3 (2021-02-05)

Bugfixes

  • The config lint step now correctly fails when a device file cannot be parsed
  • If preserveRootApplicationCCValueIDs is set, reports are no longer mapped from the root endpoint to endpoint 1.

Config file changes

  • Add support for Zooz ZEN30
  • Add additional product type and id number for Shenzen Neo PD03Z
  • Add support for Linear/Nortek/GoControl WT00Z5-1
  • Add support for Zooz ZEN71
  • Add support for AU/NZ variant of Aeotec ZW111
  • Add support for MP21Z
  • import device configs from Z-Wave Alliance (Part 6: misc devices)
  • fix: change LZW31 indicator color value size to 2
  • Param descriptions are now auto-checked for unnecessary stuff

Changes under the hood

  • The Z-Wave specifications were moved out of this repo

6.1.2 (2021-02-03)

Bugfixes

  • The driver now checks the listening flags of a node to determine whether a node can sleep instead of the Wake Up CC
  • The test whether a node is included securely was refactored to incorporate the timeout changes from v6.1.1. In addition, we now assume that a node is secure when it sends or requests nonces.
  • Configured association labels are now preferred over the ones reported by nodes
  • Non-listening nodes are now assumed to be asleep on startup and the initial ping no longer happens.
  • currentValue is now only overwritten with targetValue if that is a valid value
  • V1 Alarm frames are now treated as a normal report with two values

Config file changes

  • Force Wake Up as supported for Aeon Labs Minimote
  • Correct typos in Zooz Zen16 option choices
  • Remove double tap support from small number of early GE devices
  • Add additional config parameters to Zooz Zen26 and Zen27 and update Zen76/77 parameter language

Changes under the hood

  • Added a check for config parameter descriptions that are too similar to the label, documented best practices in this regard
  • Leading zeroes in firmware versions are now disallowed

6.1.1 (2021-01-31)

Bugfixes

  • Scene Activation CC scene IDs are no longer auto-reset to undefined. This is unnecessary since they are value events
  • All get-type commands may now timeout and return undefined without throwing
  • Value labels for the Meter CC were improved to be unique
  • UserCodeReport with status NotAvailable are now parsed correctly
  • The interview procedure after inclusion now correctly implements the Z-Wave+ Role Type Specs, resolving weird issues with some secure devices
  • currentValue and similar values are now updated immediately when a set-type command succeeds. Verification is done after a short delay.

Config file changes

  • Added several config files for new Honeywell/GE devices
  • Added several config files for remaining GE devices, misc deadbolts
  • Added Innovelli LZW42
  • Added EcoDim dimmers
  • Added Zooz Zen16
  • Added a compatibility flag to remove support of CCs from devices
  • Added Philio PAT02-A Flood Sensor
  • Removed the (now invalid) compat flag keepS0NonceUntilNext
  • Disable Supervision CC report for HomeSeer WD200+
  • Force Basic CC to be supported for Vision Security ZD2102-5 to work around unreliable Notification Reports

Changes under the hood

  • The frame type and RSSI of incoming commands are now logged if applicable

6.1.0 (2021-01-26)

Features

  • Added a pollValue method to ZWaveNode to perform get request for a specific ValueID

Bugfixes

  • Massively improved the ValueDB performance (about 500x speedup) for medium to large networks

Config file changes

  • Updated and cleaned up many device configuration files with imports from the Z-Wave Alliance website
  • Added config files for Zooz ZEN34, ZEN76, and ZEN77
  • Fix: swap ZW080 bitmasks for siren volume and siren sound

6.0.2 (2021-01-24)

Bugfixes

  • After setting the hexColor of Color Switch CC, the individual color components are no longer polled by one
  • Increased the verification poll delay after a set command to avoid capturing intermediate and outdated values
  • NonceReports no longer get stuck in the wakeup queue if a sleeping device does not acknowledge the receipt after requesting one

Config file changes

  • Imported all missing manufacturer names from the Z-Wave Alliance website
  • Imported several hundred device configuration files from the Z-Wave Alliance website

6.0.1 (2021-01-21)

Bugfixes

  • The stateId property of Scene Activation CC is now stateless
  • The controller methods to replace or remove a failed node now ping the node beforehand, to ensure the node is in the failed nodes list
  • Fixed a logging issue for Multi Channel Associations
  • removeAssociations no longer throws an error when trying to remove only multi channel associations
  • When a security-encapsulated message is dropped, the log now contains a reason
  • Fixed two sources of unhandled Promise rejections
  • When the compat flag treatBasicSetAsEvent is enabled, the Basic CC values are no longer hidden
  • Root device value events for devices with the preserveRootApplicationCCValueIDs are no longer filtered out

Config file changes

  • Added support for Aeotec aerQ ZWA009-A US/Canada/Mexico version
  • Fixed invalid parameter options in many config files
  • Parameter options with incompatible values are now detected as an error

6.0.0 (2021-01-19) · This is the way

Breaking changes · Migration guide

  • Logging can now be configured through driver options. However, the environment variables for logging are no longer evaluated lazily, so they now need to be set before requiring zwave-js.
  • The second (string) parameter of the "interview failed" event handler was removed
  • The type ValueMetadataBase has been renamed to ValueMetadataAny. The old type ValueMetadataAny was merged into ValueMetadataBase.
  • The retry strategy for sending commands to nodes has been revised. By default, a message is no longer re-transmitted when the node has acknowledged its receipt, since it is unlikely that the retransmission will change anything. The old behavior can be restored by setting the attempts.retryAfterTransmitReport driver option to true.
    To compensate for the change and give the response enough time to reach the controller, the default for timeouts.response has been increased from 1600 to 10000.
  • The driver now distinguishes between stateful and event values. The latter are now exclusively exposed through the "value notification" event.
  • The deprecated nodeInterviewAttempts option was removed
  • The options fs and cacheDir have been renamed to storage.driver and storage.cacheDir.
  • Loggers are now managed on a per-driver basis. This means you can use zwave-js to talk to different controllers and have separate logs for each.
  • The lookupXYZ methods are no longer exposed by @zwave-js/config. Use the configManager property of your driver instance instead.

Config file changes

  • The index file was removed from the repo and is now generated on demand
  • Several improvements for GE dimmers and switches
  • Added missing config parameters to IDLock 150
  • Added Innovelli LZW36 and First Alert ZCOMBO-G
  • Added Technisat Dimmer and series switch
  • Added Lifeline association to Danfoss MT 2649
  • Added product id/type to NAS-WR01ZE
  • Added Inovelli LZW31 Black Series Dimmer
  • Added Aeotec ZW187 Recessed Door Sensor 7
  • Added checks for partial parameters
  • Added Aeotec ZWA009 aerQ Temperature and Humidity Sensor
  • Added Honeywell 39348/ZW4008
  • Added Zooz zst10-700 z-wave usb stick
  • Added Fibaro Smart Switch FGS-214 and FGS-224
  • Added Fortrezz fts05p
  • Added an additional product type to Aeotec Range Extender 7
  • Added iblinds V3
  • Added Zooz ZEN31 RGBW Dimmer
  • Added ThermoFloor Z-Temp2 thermostat
  • Change manufacturer Jasco Products to GE/Jasco
  • Changed ZDB5100 config to expand on parameter 1
  • Changed several ZW175 config parameters to use partial parameters
  • Improved configuration file for Fibaro FGS223
  • Renamed config param #11 in Q-Light Puck
  • Removed an unsupported parameter from GE 14294
  • Root endpoint values are no longer hidden for Philip PAN06, Aeotec ZW095 energy meter
  • New versions of @zwave-js/config are now automatically released every night if only config files were changed since the last release.
    You can run npm update @zwave-js/config in the zwave-js install dir to pull the latest config files. For now, a driver restart is required afterwards.

Features

  • Added basic support for 700-series controllers
  • Added a compatibility option to disable the Basic CC mapping
  • Added a compatibility option to treat Basic CC::Set commands as events instead of Reports
  • Added a compatibility option skipConfigurationInfoQuery to work around a firmware issue in Heat-It Z-TRM2fx
  • Added the compatibility option overrideFloatEncoding for devices that only understand a specific float encoding (Z-TRM3 and AC301)
  • A driver option was added to enable logging to the console, even if it is not a TTY
  • A driver option was added to control the filesystem access throttling
  • Improved the label for Level low property in BatteryCC
  • Unimplemented CCs may now be sent
  • The version of zwave-js is now exported as libVersion from the main entry point
  • Implemented Battery CC V3
  • Added support for Hail CC
  • ValueIDs that use a Duration instance as the value now have the metadata type "duration"
  • Added a workaround for devices that return an invalid response when finding the first configuration param
  • Added a hexColor property to the Color Switch CC
  • Added the properties ready and allNodesReady to the driver to read the status after the corresponding events were emitted
  • The node neighbor lists now get updated when a node is removed
  • The refreshValues method is now exposed on node instances, which allows polling all actuator and sensor values of a node. Note: Please read the warnings in the documentation!
  • The controller event callback types are now exported

Bugfixes

  • Fixed an off-by-one error in the Binary Sensor Supported Report bitmask.
    Note: If your devices are affected by this bug, re-interview them to remove corrupted values.
  • Expire nonces for keepS0NonceUntilNext devices until after the next nonce was received by the device
  • The interview is no longer aborted when a device does not respond to the Wakeup Capability query
  • Fixed a crash that could happen when compressing the value DB with an existing backup file.
  • Fixed a wrong value ID for Multilevel Switch CC targetValue
  • The driver no longer assumes that a sleeping node falls asleep after a certain time
  • The name and location of a node is no longer deleted when the node gets re-interviewed and does not support Node Naming And Location CC
  • The propertyKeyName of Meter CC values now contains the Meter type name
  • Configuration CC: empty Name and Info are now accepted as valid commands
  • stopInclusion/stopExclusion now always return a boolean
  • Successful pings now correctly change the node status
  • Messages from previous interview attempts are now dropped when an interview is restarted
  • When requesting node info fails, the interview is now aborted and restarted later instead of skipping all CC interviews
  • Added two missing "specific device types"
  • Switched the basic device type for Routing Slave and Static Controller
  • If a device sends multiple NonceGet requests in a row, the duplicate requests are now ignored instead of aborting the previous transaction

Changes under the hood

  • Test releases for PRs can now be created with a command
  • PRs titles are now enforced to comply with conventional commits
  • Config json files are now automatically formatted in VSCode and linted
  • While editing device config files, supporting IDEs can now use a JSON schema to help you
  • We've added @zwave-js-bot to help us manage the repo and to help you contribute

5.7.0 (2020-12-23)

Config file changes

  • Added Aeotec thermostatic Valve ZWA021
  • Added Q-Light Puck and Zerodim 2pol
  • Added Q-Light Zerodim
  • Fixed wrong label and description for Z-Wave.Me UZB

Bugfixes

  • When a node does not respond because it is asleep, the corresponding transaction is no longer rejected and moved to the wakeup queue instead. This should restore the pre-5.0.0 behavior.
  • Added missing label to Binary Sensor CC
  • Added missing % unit to Battery level
  • Timeouts when querying User Codes and the current Lock status are now ignored
  • User Code CC Reports without a user code are no longer discarded when the user status is Available. This should improve compatibility with some non-compliant nodes
  • The targetValue for the Binary Switch, Multilevel Switch and Basic CCs is now persisted in the Value DB when setting values through the API.

Features

  • Config files can now be used specify additional CCs that a node does not advertise in its NIF.
  • Added support for fallback config files without a firmware version. These can be used to set some parameters for devices which wouldn't complete the Version CC interview otherwise

5.6.1 (2020-12-18)

Config file changes

  • Add Heiman Smoke detector
  • New product ID for Fibaro Heat controller
  • Add product config for AEOTEC Range Extender 7

Bugfixes

  • Missing responses from the node when requesting the current values during the Indicator CC no longer abort the interview

5.6.0 (2020-12-14)

Config file changes

  • Added a config file for HeatIt Z-TRM3
  • Added a config file for Eurotronic Air quality sensor
  • The Application CC value IDs of the root endpoint are now preserved for the Qubino Flush 2 Relay

Features

  • Added the compat config option preserveRootApplicationCCValueIDs to disable hiding the root endpoint's application CC value IDs
  • The helper method guessFirmwareFileFormat was added to guess the firmware format based on the file contents
  • The value IDs of the Z-Wave+ CC are now internal and can instead be accessed through the corresponding properties on the ZWaveNode and Endpoint instances
  • The value IDs of the Node Naming and Location CC are now internal and can instead be accessed through the corresponding properties on the ZWaveNode instance
  • Added support for sending multicast and broadcast commands (non-secure only)

Bugfixes

  • Driver.destroy() no longer does anything after the first call
  • Sound Switch Tone Play Report commands now parse the volume if it exists
  • The log entries for Notification CC Reports now contain the correct notification event/state
  • The value IDs of Multi Channel Association CC are now marked as internal
  • When encapsulating commands, the secure flag is now correctly propagated
  • Fixed a bug where commands that belong to a different transaction could be mismatched, resulting in unexpected messages
  • The mapping of root to endpoint 1 now works correctly if the node does not support Multi Channel Association CC at all
  • When the Multilevel Switch CC level change commands indicate that Supervision is not supported, this is now remembered and the command gets retried without supervision.
  • Removed some debug logging which could blow up the log file size
  • Notification CC Reports are now parsed correctly when the V1 Alarm bytes are not zero
  • Color Switch CC: Setting the warm white targetValue no longer falsely claims that the propertyKey is missing
  • Added support for *.gbl firmware files and Aeotec updater executables which include a checksum and a target chip byte.
  • Removing a node association no longer throws an error when both multi channel and normal associations are supported.
  • getDefinedValueIDs no longer returns value IDs that are only controlled by a node

Changes under the hood

  • Types, interfaces and enum declarations in the docs can now be automatically copied and updated from the TypeScript sources
  • Fixed some leaky tests

5.5.0 (2020-11-24)

Config file changes

  • Added a config file for Jasco ZW3010
  • Added new Notification definitions
  • Added new Indicator definitions

Features

  • Implemented the replaceFailedNode API
  • Added a third argument to the "interview failed" event handler which includes an object with additional details about the interview attempt (see docs).
    WARNING: The current signature is deprecated and will be changed in the next major version!
  • Metadata can now be customized by CCs with the ccSpecific property. This is used in several CCs to allow applications to identify which value a value ID describes (e.g. sensor type, meter type, etc...)

Bugfixes

  • The logs of ConfigurationCC::PropertiesGet now include the correct next parameter #
  • The targetValue of switch-type CCs is no longer overwritten with undefined when a report without target value is received

Changes under the hood

  • Switched to npm@7 workspaces to get rid of TypeScript's paths config and support project-relative auto-imports

5.4.0 (2020-11-14)

Config file changes

  • Fibaro Keyfob no longer uses special chars in param labels
  • Changed the valueSize of param 9 for Shenzhen Neo PD03Z from 2 to 1

Features

  • Added the compat config option keepS0NonceUntilNext to disable automatic nonce invalidation for bugged devices (e.g. ID Lock) which reuse nonces in some situations

Bugfixes

  • If a node association is duplicated between Association CC and Multi Channel Association CC, it is now removed from both when using Controller.removeAssociations
  • Add missing production dependency semver to @zwave-js/config
  • The duration property for the Binary Switch, Color Switch, Multilevel Switch and Scene Activation CCs is now writeable
  • The Central Scene CC interview is now skipped if a device does not respond to the supported scenes request
  • Empty user codes are now also handled as strings instead of Buffer objects
  • The targetValue property for the Binary Switch, Multilevel Switch and Basic CCs is now created, even if is undefined.
  • The type CommandClass is now exported from zwave-js/CommandClass
  • The interview process for Configuration CC V3+ now continues even if the response to NameGet and/or InfoGet commands is missing or incomplete
  • The interview process for Association Group Info now continues even if a response is missing or incomplete
  • Multi Channel Lifeline Associations are no longer created automatically if the device does not support the Multi Channel CC
  • Fixed an issue where marking nodes with active transaction as asleep would mess up the serial communication with the controller
  • The receiver of an S0 nonce is now stored and after a successful reply, all nonces for said issuer are now invalidated
  • Unsuccessful controller commands now return the response message instead of throwing

Changes under the hood

  • The log messages for unsuccessful controller commands no longer claim that the controller did not respond

5.3.6 (2020-11-04)

Bugfixes

  • Compatibility with non-spec-compliant devices has been improved:
    • User Code CC: trim zero-padded user codes, handle non-ascii user codes as Buffers instead of strings
    • Notification CC: support deserializing Notification Reports where the Alarm Level is not 0
    • Notification CC: support deserializing Notification Reports with Keypad events that only contain a User ID instead of a UserCode::Report

5.3.5 (2020-11-03)

Bugfixes

  • Errors while updating the Multilevel Switch value in response to a Supervision report are now caught
  • Added missing metadata to the duration property in Color Switch CC

5.3.4 (2020-10-27)

Config changes

  • Updated config param description for Z-Wave.Me ZME_05459 Blinds controller
  • Added a device config for Z-Wave.Me ZME_06436 Flush Mountable Blind Control

Changes under the hood

  • Added more debug logging to track down a particularly sneaky bug

5.3.3 (2020-10-25)

Bugfixes

  • Including controller-type nodes (the bare minimum) is now supported
  • Alarm Sensor CC Reports no longer overwrite the node ID with 0.
  • The timespan that a node is assumed to be awake is now prolonged when it acknowledges a command
  • Fixed a crash while serializing a DoorLockCC::ConfigurationSet with invalid input

Changes under the hood

  • In case of an unexpected error while handling a message, the original error stack is now preserved if possible

5.3.2 (2020-10-21)

Bugfixes

  • Added / fixed some missing or incorrect exports from zwave-js:
    • The CCAPI type is now exported
    • NODE_ID_BROADCAST and NODE_ID_MAX are now value exports
    • The Endpoint class is now exported
    • The InterviewStage enum is now exported
  • Several user-facing errors were converted from Error to ZWaveError in order to be consistent with other errors.
  • Warnings about insecure communication with a node because of missing security configuration are now emitted as ZWaveErrors with code ZWaveErrorCodes.Controller_NodeInsecureCommunication
  • Internal references to @types/fs-extra and jest are no longer leaked, allowing users to consume this library without skipLibCheck
  • User Code CC no longer uses V2 methods during the interview of a V1 node
  • Fixed an error during the Central Scene CC interview that could occur if Association Group Information is not supported
  • For several CCs, missing responses to non-critical requests are now ignored during the interview
  • Sent nonces are now transmitted using the ACK and AutoRoute transmit options to fix secure inclusion issues with some devices
  • Fixed an error during logging of a DoorLockCC::ConfigurationSet command
  • After a fresh interview, battery-powered nodes that are temporarily mains-powered, are no longer sent into a "go to sleep" loop
  • When a node requests multiple nonces in a short timespan, only respond to the most recent request

Changes under the hood

  • SpyTransport was moved to @zwave-js/testing, a development-only testing package

5.3.1 (2020-10-13)

Bugfixes

  • The targetValue metadata in Color Switch CC no longer claims that the value is readonly

Changes under the hood

  • Changed how the transaction creation stack is included in error logs

5.3.0 (2020-10-10)

Features

  • Transactions now remember where they were created. This can be used to track down unhandled transaction rejections.
  • When a message should be sent to a node that is assumed to be dead, the node is now pinged first to check if it is really dead.
  • If a device supports Notification CC but sends Alarm CC (V1) frames, those are treated as Notification Reports if possible.

Bugfixes

  • The value IDs controlling Start/Stop Level Change commands in the Multilevel Switch CC are now also created for V1 and V2 nodes during the interview
  • The Alarm Sensor CC value IDs for supported sensor types are now created as soon as they are known to be supported.

5.2.2 (2020-10-05)

Config changes

  • Added Electronic Solutions DBMZ EU

Bugfixes

  • Fixed a crash when receiving truncated messages
  • When an unexpected error occurs while executing API commands (e.g. Security CC requires a nonce to be sent!), the corresponding transaction is now retried or rejected instead of crashing the driver.
  • Nodes are sent to sleep again when they have no pending messages
  • Compat queries are removed from the queue when a node goes to sleep
  • Pending pings are resolved when a node wakes up
  • sendNoMoreInformation now continues to work after it failed once
  • WakeUpCC::NoMoreInformation is no longer moved to the wakeup queue when a node falls asleep

Changes under the hood

  • Removed some unused code

5.2.1 (2020-10-03)

Bugfixes

  • Fixed a crash while trying to determine the notification mode of a node
  • Fixed a crash while defining metadata for a non-idle notification value

5.2.0 (2020-10-01)

Features

  • It is now possible to add an expiration timeout to sent messages by using the expire option for sendMessage.
  • Security CC now stores unsolicited nonces as "free" and tries to use free nonces instead of requesting a new one if possible.
  • Several improvements to Notification CC:
    • The interview now detects whether a node is push or pull
    • Push nodes now have their supporting values set to idle if no value is yet known
    • Pull nodes are now auto-refreshed every 6 hours and on wakeup

Bugfixes

  • During secure inclusion, the timeouts required by the Z-Wave specs are now correctly enforced
  • When starting a network heal, the "heal network progress" event is now emitted immediately with the initial progress.
  • Fixed a crash that could when queueing handshake messages while controller messages are pending
  • Thermostat Setpoint Set commands now use the device-preferred scale instead of defaulting to the first one.
  • A couple of Notification CC variables were changed to not have an idle state

Changes under the hood

  • Formatting log messages has been simplified. Log messages are now defined as objects and the log formatter auto-aligns the values.
  • All remaining CCs had their log representation improved. If an error occurs during this conversion, this error is now caught.
  • Code cleanup: TODOs, useless string interpolations
  • Updated a bunch of dependencies

5.1.0 (2020-09-28)

Features

  • Added support for User Code CC V2
  • All timeouts and the number of retry attempts are now configurable through the Driver options.

Bugfixes

  • Nodes are now only marked as dead or asleep if the controller receives no ACK for the sent messages. Missing responses to potentially unsupported requests no longer change the node status.
  • SendSupervisedCommandOptions now correctly extends CommandOptions
  • Timeouts configured through Driver options are now respected correctly

5.0.0 (2020-09-25)

Breaking changes

  • The status Alive was added to the NodeStatus enumeration. The node status can no longer switch between all states, only between Dead and Alive, between Asleep and Awake and from and to Unknown.
  • The status property on ZWaveNode is now readonly. To change the status, use the markAsAsleep and similar methods, which only change the status if it is legal to do so.
  • Unsolicited commands are now discarded in accordance with the Z-Wave specs if they are unencrypted but the CC is supported secure only
  • driver.start() now throws if no handler for the "error" is attached

Features

  • A new method withOptions was added to CCAPI, which controls the used SendCommandOptions. For example, this allows changing the priority of each API call for that instance.
  • All interview messages now automatically have a lower priority than most other messages, e.g. the ones created by user interaction. This should make the network feel much more responsive while an interview process is active.
  • The node events asleep, awake, alive and dead now include the previous status aswell.
  • Added the method isEncapsulatedWith to CommandClass to perform checks on the encapsulation stack.
  • In addition to serial ports, serial-over-tcp connections (e.g. by using ser2net) are now supported. You can connect to such a host using a connection string of the form tcp://hostname:port. Use these ser2net settings to host a serial port: <external-port>:raw:0:<path-to-serial>:115200 8DATABITS NONE 1STOPBIT

Bugfixes

  • Improved performance of reading from the Value DB
  • Retransmission of commands now distinguishes between errors on the controller side and missing responses from nodes
  • If a node that is known to be included securely does not respond to the Security CC interview, it is no longer assumed to be non-secure
  • If a node that is assumed to be included non-securely sends secure commands, it is now marked as secure and the interview will be restarted
  • The interview for sensor-type CCs is now skipped if a timeout occurs waiting for a response. Previously the whole interview was aborted.
  • Basic CC values that are mapped to Binary Switch or Binary Sensor are now interpreted correctly.
  • Fixed a crash that could occur when assembling a partial message while the driver is not ready yet.

Changes under the hood

  • The driver has been completely rewritten with state machines for a well-defined program flow and better testability. This should solve issues where communication may get stuck for unknown reasons.
  • A node's status and ready properties are now managed by state machines to have better control over how and when the status changes.
  • Enabled the TypeScript option strictFunctionTypes and the usage of several decorators is now statically enforced
  • Added more fine-grained control over expected responses, and distinguish between responses, callbacks and node updates for sent messages.
  • Many CCs had their log representation improved. If an error occurs during this conversion, this error is now caught and logged.

4.2.3 (2020-09-18)

Config changes

  • (slangstrom) Add support for Everspring AC301

4.2.2 (2020-09-15)

Config changes

  • Removed parameter #5 from Aeon Labs ZW130 because it doesn't seem to be supported in any firmware version

Bugfixes

  • A node is no longer marked as dead or asleep if it fails to respond to a Configuration CC::Get request. This can happen if the parameter is not supported.

4.2.1 (2020-09-10)

Config changes

  • (Mojito-Joe) Added a configuration file for ABUS CFA3010.

4.2.0 (2020-09-04)

Features

  • Invalid Multi Channel CC::Command Encapsulation which follow the V2+ format but use a V1 header are now treated like valid commands

Bugfixes

  • Further performance improvements while decoding Configuration CC::Reports

4.1.2 (2020-09-04)

Bugfixes

  • Reduced CPU usage in networks with a lot of values

4.1.1 (2020-09-01)

Bugfixes

  • The Basic CC interview is no longer performed if any actuator CC is supported
  • If a node does not respond to a Basic CC::Get, the interview is no longer aborted. Instead the Basic CC is marked as unsupported.

4.1.0 (2020-08-29)

Features

  • Added the ability to send Multilevel Sensor Reports using the new sendReport method

Misc

  • Updated dependencies including bugfixes and security patches

4.0.7 (2020-08-16)

Bugfixes

  • Replaced Sentry.io DSN
  • Each installation now generates a random ID that is can be used to suppress error reports on a per-user basis

4.0.6 (2020-07-30)

Bugfixes

  • Logs are no longer split across two logfiles.

4.0.5 (2020-07-30)

Bugfixes

  • Made Meter CC::Reset accessible through the SET_VALUE API.

4.0.4 (2020-07-05)

Bugfixes

  • During the interview, endpoint associations are now converted to node associations if required
  • Allow Set and SupportedSet commands in Alarm CC V2

4.0.3 (2020-06-30)

Bugfixes

  • If a node fails to respond to Multi Channel Endpoint Find, the interview is no longer aborted and sequential endpoints are assumed instead
  • Renamed the manufacturer Goap to Qubino
  • For many Qubino devices, the lifeline now uses a node association

4.0.2 (2020-06-29)

Bugfixes

  • The driver no longer goes into an infinite loop when receiving a CRC-16 Command Encapsulation CC (#888)

4.0.1 (2020-06-26)

Breaking changes

See "Changes under the hood". I don't expect anything to break, but to be safe, I'll declare this as a major version.

Bugfixes

  • It is now assumed that the Basic CC API is always supported

Features

  • Mandatory supported CCs that are defined in the device class config are now respected. This should improve support for legacy devices that don't include all CCs in the NIF.
  • Added support for Sound Switch CC
  • Added support for Alarm Sensor CC. This CC will only be interviewed if Notification CC is not supported.
  • Added a sendReport command to the Notification CC API, which can be used to send custom NotificationCCReports.

Changes under the hood

  • Moved the definition of legacy Z-Wave device classes to a config file.

  • This project has been converted to a monorepo and split into the following packages:

    • zwave-js: As before, this is the main entry point for consumers
    • @zwave-js/config: The configuration files and methods to access them
    • @zwave-js/core: The core modules, which are shared between zwave-js and @zwave-js/config
    • @zwave-js/serial: A lightweight wrapper around node-serialport with a built-in parser for received serial API messages
    • @zwave-js/shared: Utility methods that are shared between all other packages

    It is likely that other packages will be added in the future.

3.8.5 (2020-06-18)

Bugfixes

  • Overlapping SendData(Multicast) commands are now avoided
  • SendData(Multicast) commands without a callback are now aborted after a while

3.8.3 (2020-06-17)

Bugfixes

  • The CRC-16 Command Encapsulation CC is now correctly detected as an encapsulating CC

3.8.2 (2020-06-17)

Bugfixes

  • Missing information is included in logfiles again when the LOGTOFILE env variable is set after the library was imported
  • The CRC-16 Command Encapsulation CC is now correctly detected as implemented
  • If an association group is configured to use node associations, the Multi Channel Association CC version heuristic is now ignored

Changes under the hood

  • Added some details to the Multi Channel Association CC interview logging

3.8.1 (2020-06-16)

Bugfixes

  • Associations to the controller are not checked for supported CCs anymore
  • addAssociations now respects the noEndpoint flag
  • Removing multi channel endpoint association to the root endpoint no longer removes the equivalent node association
  • getAllDestinationsCached no longer treats node id associations like multi channel associations to endpoint 0

3.8.0 (2020-06-16)

Features

  • Added the noEndpoint flag to force lifeline associations to use node id associations
  • The Multi Channel Association CC interview now falls back to setting associations with Association CC if the node does not accept the added associations

Config changes

  • Changed AEON Labs ZW095 lifeline to a node id association
  • (nicoh88) Added config files for Devolo Dimmer (MT2760) and Shutter (MT2761)

3.7.9 (2020-06-16)

Bugfixes

  • Logfiles are created again when the LOGTOFILE env variable is set after the library was imported

3.7.8 (2020-06-16)

Bugfixes

  • If a configured lifeline association is outside the range of multi channel associations, a normal association is now used instead
  • The Association CC interview now always requests the group count, even if Multi Channel Association CC is supported
  • getAssociations and getAssociationGroups now respect all associations (the ones done with Multi Channel Association CC and the ones done with Association CC).

3.7.7 (2020-06-15)

Bugfixes

  • Logfiles now contain all logs in the correct order
  • Fixed an error when using the DoorLockCC setValue API when not all configuration values have been received
  • Errors in the async part of handleFirmwareUpdateGet are now caught and logged
  • When a non Z-Wave serialport is configured or loading the configuration files, the "error" event is now emitted and the driver is destroyed instead of crashing
  • If a MultiChannelCCEndpointFindReport does not contain any bytes for the found endpoints, the CC is no longer discarded. This should improve compatibility with some devices, e.g. TKB Home TZ74 Dual Switch.

Changes under the hood

  • Removed some unnecessary logging

3.7.6 (2020-06-15)

Bugfixes

  • Fixed a crash that happens when receiving a Multi Command CC

3.7.5 (2020-06-14)

Bugfixes

  • Removing a multi channel endpoint association to the root endpoint now also removes the equivalent node association (REVERTED in v3.8.1)

3.7.4 (2020-06-14)

Bugfixes

  • Improved logging for Multi Channel Association CC
  • Assembling partial CCs now works if there are multiple levels (e.g. Security CC -> Multi Channel Association Report)

3.7.3 (2020-06-14)

Bugfixes

  • Logging for the following CCs has been improved:
    • MultiChannelCCCommandEncapsulation - The source endpoint was added
    • SupervisionCCGet and SupervisionCCReport - Added parameter logging
    • MultilevelSwitchCCSet, MultilevelSwitchCCReport and MultilevelSwitchCCStartLevelChange - Added parameter logging
  • ZWaveError is now exported as a value
  • The Firmware type is now exported
  • Node information frames after node.refreshInfo are no longer discarded
  • Firmware updates we don't know about are now aborted without emitting an event
  • Failed firmware updates are now handled correctly
  • All associations of the Fibaro FGMS-001 motion sensor are now configured to point to the controller

3.7.2 (2020-06-12)

Bugfixes

  • During the interview, the cached lifeline destinations for Multi Channel Association and Association CCs are now updated.

3.7.1 (2020-06-12)

Bugfixes

  • node.refreshInfo no longer causes an event to be emitted for every cleared value
  • node.refreshInfo resets the state of the ready event and all cached CCs and API instances

3.7.0 (2020-06-11)

Bugfixes

  • The compat queries for Danfoss thermostats now query setpoint 1
  • Always send pings, even if the target node is asleep
  • Several report-type commands now correctly store their values in the value DB when received
  • MultiChannelCCV1Get now checks whether the returned MultiChannelCCV1Report is for the correct endpoint
  • A node's neighbors are now persisted in the cache so they can be used to visualize the network until a repeat interview is complete
  • Added labels to metadata of Language CC values

Features

  • Added support for Door Lock CC V4
  • Added support for Lock CC
  • Added interview for Language CC
  • Added support for over-the-air (OTA) firmware updates with Firmware Update Meta Data CC
  • Lifeline reports for the root endpoint are now mapped to Endpoint 1 if the node supports Multi Channel Association CC in V1 or V2
  • ZWaveNodes now have a refreshInfo method which resets all known information and restarts the node interview
  • The node interview is no longer aborted if a response for the following requests times out:
    • Battery status
    • Battery health
    • Binary Sensor status
    • Multilevel Sensor status

Changes under the hood

  • Added driver.waitForCommand method to expect receipt of a command that matches a given predicate
  • Added driver.computeNetCCPayloadSize method to compute how many payload bytes can be transmitted with a given CC (taking encapsulation into account).
  • During build, CCs constructors for report-type commands are now checked if they call persistValues. Application CCs that don't will cause an error, all others a warning.

3.6.4 (2020-06-04)

Bugfixes

  • Thermostat Setpoint Set has been removed from the compat queries for Danfoss thermostats, because it overwrites queued commands

3.6.3 (2020-06-03)

Bugfixes

  • Always send handshakes replies, even if the target node is asleep

3.6.2 (2020-06-03)

Bugfixes

  • "Not implemented" or "Invalid payload" errors that happen while merging partial CCs are now correctly handled

3.6.1 (2020-06-03)

Bugfixes

  • GetNodeProtocolInfoRequest is no longer treated as a message to a node
  • When moving messages to the wakeup queue, all pings are now rejected instead of only the pending ones. This avoids interviews getting stuck on a ping.

3.6.0 (2020-06-02)

Features

  • Added support for Protection CC
  • The driver now sends a nonce in reply to SecurityCCCommandEncapsulationNonceGet commands

Bugfixes

  • Nodes that ask for a nonce are now automatically marked secure
  • Fixed the computation of the authentication code when secure auth data length was a multiple of 16 bytes.
  • Nonces are now marked as used immediately after (de)serialization
  • If a message fails to serialize, the corresponding transaction is now rejected instead of crashing the driver
  • Sequenced S0 encapsulated commands can now be received
  • Unsolicited commands are now correctly decoded if they are split across multiple messages

3.5.5 (2020-06-01)

Bugfixes

  • The Security CC interview no longer stalls the interview process if the node is not included securely.
  • Nonces that could not be sent are now expired immediately
  • The security status of nodes is now stored and updated correctly

3.5.4 (2020-05-30)

Bugfixes

  • The driver now correctly handles nested transactions and their retransmission (e.g. for security encapsulated messages)

Changes under the hood

  • Updated TypeScript to v3.9
  • Updated ESLint to v7, some changes to lint rules

3.5.3 (2020-05-27)

Bugfixes

  • All emitted "error" events now correctly contain an Error instance as the parameter.
  • When a node sends a NIF, pending pings are resolved. This should increase the consistency of manually waking up nodes during the interview.
  • When an interview is cut short due to missing network key, the "error" event is only emitted once.
  • When a node is removed, its interview process is canceled and all errors are suppressed.
  • If Multi Channel Association CC is V1, removing all destinations from all groups now correctly loops through all groups instead of using 0 as the group id.

3.5.2 (2020-05-27)

Bugfixes

Various fixes related to Security CC when the network key is not configured. This means that the driver will not crash but likely there's no meaningful communication with secure nodes possible:

  • The list of securely supported commands is not requested
  • Nonce Get requests are not answered
  • CCs are no longer encapsulated securely. This means that the interview for battery-powered nodes won't complete if Wake Up CC is only supported securely.

3.5.1 (2020-05-25)

Bugfixes

  • Cache values that are Maps are now correctly serialized. Fixes crash issuedCommands.has is not a function
  • Fixed crashes with the message Security CC can only be used when the network key for the driver is set.

3.5.0 (2020-05-24)

Features

  • Added experimental support for Security S0 (#814)
  • The "inclusion started" event now includes a boolean parameter to indicate whether the inclusion was started securely

Bugfixes

  • It is now possible to stop inclusion and exclusion processes again

3.4.0 (2020-05-21)

Features

  • ZWaveNode class: expose ready as a property (instead of only a one-time event), which can be missed

Bugfixes

  • The NodeStatus enum is now exposed as a value (instead of a type-only export)

3.3.0 (2020-05-21)

Features

  • The endpoint interview for Version CC is now skipped
  • The node status is now determined more quickly during the interview

Bugfixes

  • If the current transaction is a ping, the calling code no longer gets stuck when messages are moved to the wakeup queue
  • Config parameter 5 has been removed from the WallMote Quad for firmware versions <= 1.5
  • Unsolicited messages are now logged
  • Messages to nodes which don't expect an acknowledgement are now correctly retransmitted if the response doesn't come (e.g. RequestNodeInfo)
  • Pings are no longer dropped if the controller failed to send them (in contrast to a missing response from the node)
  • The log for unrecoverable errors during the interview now include the node ID
  • The interview process should now correctly be rescheduled when communication fails outside the CC interview stage

3.2.4 (2020-05-17)

  • Multi Channel Association CC: Fall back to config files during the interview if the node does not support Z-Wave+ (like Association CC does)

3.2.3 (2020-05-17)

Bugfixes

  • Multi Channel Association CC: After the controller is assigned to the lifeline in the interview, this association is added to the cached association list
  • Controller:
    • getAssociationGroups now includes the last group aswell
    • adding and removing associations now updates the list of known associations

3.2.2 (2020-05-17)

Bugfixes

  • Fixed a crash that happened when received CCs tried to access the Value DB before it was opened

3.2.1 (2020-05-17)

Bugfixes

  • Multi Channel node associations to the controller are converted to endpoint associations if necessary
  • VersionCCCommandClassGet now verifies that the response matches the requested CC
  • Removed a duplicate line when logging the protocol information of a node

3.2.0 (2020-05-15)

Features

  • Added compatibility option queryOnWakeup to configure which API methods must be called when a device wakes up. Some devices (like the Danfoss thermostats) expect to be queried after wakeup, even if they send the required information themselves.

Bugfixes

  • CCs that can split their information into multiple messages now correctly store that information when only a single message is received

3.1.0 (2020-05-11)

Features

  • Added getAssociationGroups method to Controller to retrieve all defined association groups and their information for a node (#794)

Bugfixes

  • Node information (especially CC versions) are correctly restored from cache again
  • The metadata for the manufacturer info for the Controller is now correctly stored as metadata, not values
  • All handles for the optimized network cache are now closed when destroying the driver
  • Nodes are now sent to sleep 1 second after waking up if there are no pending messages

3.0.0 (2020-05-08)

Breaking changes

  • The healNetwork method was removed from the Controller class (deprecated in v2.4.0) (#731).
    If you're still using it, you need to switch to beginHealingNetwork.
  • The minimum supported Node.js version is now 10

Features

  • Reduced CPU usage of the network cache (#784)
  • During the network heal, the routes from all nodes to the controller and between associated nodes are now updated.

Bugfixes

  • Duration objects are now correctly deserialized from the cache
  • During the interview, value events for value IDs of the root endpoint are now correctly suppressed if they mirror functionality of other endpoints.

2.16.0 (2020-04-28)

Features

  • Added support for Color Switch CC
  • Added exports for all the relevant things needed by consuming applications (zwave-js#762 (comment))
  • Log outputs can now be filtered by nodes using the LOG_NODES env variable (#772)
  • Nodes now emit a "interview failed" event when the interview fails with some additional info why (#769)

Bugfixes

  • Fixed error text in getAssociations
  • WakeUp CC is now marked as supported when receiving wake up notification
  • The byte length of Configuration values is now validated under more circumstances

Changes under the hood

  • TypeScript 3.8 with all its goodies!
  • Filter out a bunch of user errors before reporting them with Sentry
  • Use gulp for better control over some build tasks
  • Check out the new Documentation!

2.15.7 (2020-03-22)

Bugfixes

  • Added missing setValue API for Fibaro Venetian Blind CC

2.15.6 (2020-03-16)

Bugfixes

  • Fibaro Venetian Blind CC Reports are now correctly deserialized

2.15.5 (2020-03-15)

Bugfixes

  • Delayed the check for manufacturer ID until the Manufacturer Proprietary CC needs it to avoid crashing during cache serialization

2.15.4 (2020-03-11)

Bugfixes

  • The FibaroVenetianBlindCCGet now correctly expects a response

2.15.3 (2020-03-09)

Bugfixes

  • The firmwareVersion property of a node now returns a value again
  • Fixed the interview procedure of Manufacturer Proprietary CC by reading the manufacturer ID from the Value DB inside the constructor

2.15.2 (2020-03-07)

Bugfixes

  • Fixed the logic for filtering out root endpoint values

2.15.1 (2020-03-07)

Bugfixes

  • Send data transmit reports for singlecast messages are detected correctly again

2.15.0 (2020-03-07)

Features

  • Config files may now specify manufacturer proprietary parameters. This can be used to enable certain manufacturer proprietary commands
  • Completed support for the Fibaro Venetian Blind CC
  • Added support for some legacy devices by implementing Multi Instance CC (version 1 of the Multi Channel CC)
  • When the wake up interval of a device seems to be longer than configured, the current interval is now re-queried
  • Upon receipt of a ClockCCReport which deviates from the controller's clock, the sending node's clock setting now gets updated
  • Value IDs of the root endpoint which have a corresponding value on another endpoint are now filtered out

Bugfixes

  • Fixed a compilation issue regarding Send Data message arguments
  • When testing potential responses of Multi Channel requests, the response's source endpoint is now checked
  • When testing potential responses of ConfigurationGet requests, the response's parameter number is now checked
  • The device config for the controller node now gets loaded if possible

Configuration updates

  • Updated ZHC5002 configuration for firmware versions >= 2.02
  • Removed a bunch of duplicate and incomplete configuration files

2.14.0 (2020-02-23)

Features

  • Added support for multicast destinations in CCs
  • Multichannel CC: The interview now needs less messages when a node reports identical endpoint capabilities

Bugfixes

  • The setValue API no longer crashes the driver if an invalid value for the CC is passed
  • Configuration CC: The Set command no longer accepts values that are too large for the param's value size.

2.13.3 (2020-02-13)

Bugfixes

  • Multi Channel CC: The EndPointFind is no longer used in V2

2.13.2 (2020-02-10)

Bugfixes

  • The config file for HeatIt Z-Push Button 8 is now correctly retrieved
  • Multilevel Switch CC: Start level change commands now include the start level even if the ignoreStartLevel flag is set. Some devices might ignore this flag and behave oddly.

2.13.1 (2020-02-09)

Bugfixes

  • The lower limit for the Multi Channel CC has been set to V2

2.13.0 (2020-02-06)

Features

  • Improved support for notifications with the following event parameters: Duration, Command Classes, named numeric values
  • Added support for the Clock CC.
  • Multilevel Switch CC: Start/StopLevelChange commands are now supervised if possible

Bugfixes

  • Get-type commands which request a specific type now inspect received Reports whether they match the request

2.12.3 (2020-02-02)

Bugfixes

  • The interview sequence for Thermostat CC V1/V2 should no longer get stuck
  • Nodes that confirm the receipt of a request but do not respond are no longer marked as sleeping or dead
  • Messages from wrong nodes are no longer considered as a potential response to the current transaction
  • The RTT calculation now works correctly for retransmitted messages
  • Fixed a crash that could happen when receiving a MultiChannelCCAggregatedMembersReport
  • Fixed a crash that could happen during the Notification CC interview

2.12.2 (2020-01-26)

Bugfixes

  • Thermostat Setpoint CC: In Version 1 and 2, the setpoint type N/A is no longer scanned.

2.12.1 (2020-01-25)

Bugfixes

  • The node interview is no longer aborted when an unexpected ConfigurationReport is received
  • Retrying the interview procedure now happens after a short waiting period to give nodes time to recover
  • If a node times out after a confirmation, the sent message is retried just like if there was no response at all
  • Messages to sleeping nodes are now also retried before immediately assuming they are asleep

2.12.0 (2020-01-25)

Features

  • When a node is removed from the network, all associations to it are also removed
  • The interview procedure is now canceled and retried when an error occurs instead of silently failing all futher steps
  • The progress report for network healing distinguishes between failed, skipped, pending and healed nodes.

Bugfixes

  • The network heal now skips nodes that are dead or likely dead

Changes under the hood

  • Added some lint rules for the firmware in device config files

2.11.1 (2020-01-21)

Bugfixes

  • A potential source of stalled communication because of a missing timeout was eliminated
  • The progress report for network healing now correctly distinguishes between not yet healed nodes and nodes that failed to heal

Changes under the hood

  • Improved the log output for bullet points as well as sent and received messages
  • Log lines that are completely filled and have secondary tags no longer include garbage when logging to a file

2.11.0 (2020-01-21)

Features

  • Implemented the Supervision CC. The Driver now has two additional methods to make use of that feature:
    • sendSupervisedCommand(): Sends a command to a node using supervision and returns with the reported status (success, working, fail). This method throws if Supervision CC is not supported.
    • trySendCommandSupervised(): Convenience wrapper around sendSupervisedCommand and sendCommand. Automatically determines whether supervision is supported. Returns the supervision status if it is, and nothing otherwise
  • The Multilevel Switch CC now makes use of supervised set commands if possible.

Bugfixes

  • Messages to sleeping nodes are now correctly de-prioritized when the awake timeout elapses
  • Messages are now automatically re-transmitted when the controller responds with a NAK or when it fails to respond at all
  • ACKs from the controller after a retransmit are no longer treated as unexpected
  • The logic that determines a message's role (expected, unexpected, confirmation, ...) now takes the encapsulation stack into account.

2.10.0 (2020-01-18)

Features

  • Locally reset devices are now treated like failing nodes and automatically removed from the controller
  • The Notification status is now also queried on wakeup
  • The status of non-reporting listening nodes is now regularly queried

Bugfixes

  • The controller is now correctly treated as an awake node when prioritizing messages
  • The partial interview for the Meter CC no longer re-queries the capabilities
  • All timeouts and intervals are now cleared when the driver is shut down.

2.9.1 (2020-01-07)

Bugfixes

  • Notification CC Reports that are received as a response during the interview are now correctly handled
  • The ready event is now only for nodes that are known to be alive or asleep
  • After removeFailedNode() has succeeded, the node is removed from the driver and the corresponding events are emitted
  • The alive, awake and dead events are now also emitted for nodes if their status was previously unknown.
  • After a node was removed or marked as dead, the check for all nodes ready is performed again
  • Dead nodes are ignored in the check for all nodes ready to avoid the necessity for physical user interaction

2.9.0 (2020-01-05)

Features

  • Added isFailedNode() and removeFailedNode() to the Controller class
  • The scenes of the Scene Activation CC are now automatically reset after the duration has elapsed.

2.8.0 (2020-01-04)

Features

  • Added the driver options fs and cacheDir to replace the default fs driver and/or cache directory

2.7.1 (2020-01-04)

Bugfixes

  • The Indicator CC setValue API now accepts boolean values for binary indicators

2.7.0 (2020-01-03)

Features

  • Basic CC reports no longer create a value when they are mapped to another CC
  • IndicatorCC:
    • Binary indicators now use boolean values
    • V1 indicators (unspecified) are now ignored if an endpoint is known to have V2 indicators

Bugfixes

  • Many occurences of TODO: no handler for application command in the log were removed
  • The driver is no longer reset when unexpected data is received. Instead the invalid bytes are skipped.

2.6.0 (2020-01-02)

Features

  • Implemented Scene Activation CC

Bugfixes

  • The env variables LOGTOFILE and LOGLEVEL are now lazily evaluated

2.5.2 (2020-01-01)

Bugfixes

  • Removed a duplicate config parameter from Heatit Z-Scene Controller
  • IndicatorCC: The first indicator ID is no longer ignored

2.5.1 (2019-12-30)

Bugfixes

  • The device config is now also loaded when deserializing nodes from the cache

2.5.0 (2019-12-30)

Features

  • Added the event "ready" to ZWaveNode and "all nodes ready" to Driver to notify users that a node respectively all nodes are safe to be used

Bugfixes (or maybe it's a feature?)

  • BasicCCSet commands that are received from a node are now treated like reports
  • If possible, received BasicCC commands are mapped to specific CCs

Definitely Bugfixes

  • Avoid resetting the IO layer while the driver is not ready
  • IndicatorCC:
    • Corrected the expected response to SupportedGet command
    • Improved property(Key) translation
  • MeterCC: Add translation for property and propertyKey
  • Nodes and timers are now cleaned up after a hard reset of the controller
  • Supported CC and their versions are now correctly stored in the cache file
  • The cache file is no longer discarded when it contains a value of an unsupported CC
  • Endpoints can no longer be accessed before the Multi Channel interview is completed.
  • Duplicate labels for several configuration parameters were renamed

Changes under the hood

  • Updated several dependencies
  • Duplicate configuration parameter labels are now marked as a warning

2.4.1 (2019-12-18)

Bugfixes

  • Fixed a crash that happens when a MultiChannelCCAggregatedMembersReport is received.
  • Fixed a crash that happens when receiving a message from a node endpoint, but that endpoint was not known to the controller

2.4.0 (2019-12-17)

Features

  • The log output now contains the version of this library (and a fancy title!)
  • Reworked the healNetwork process:
    • The controller now has two additional methods: beginHealingNetwork and stopHealingNetwork. The original healNetwork now simply calls beginHealingNetwork and is deprecated.
    • Two additional events (heal network progress and heal network done) are emitted during the process. The event callback receives a map with the current process: node id (number) => heal done (boolean).
  • Pending messages are now automatically removed from the send queue if they no longer serve a purpose (e.g. node removed or healing process stopped)
  • The status of sleeping nodes is automatically reset to asleep 10 seconds after the wake up or the last completed transaction.

Bugfixes

  • Config parameters are no longer queried multiple times if there are partial config params defined
  • If a ping failed and the node's messages are moved to the wake up queue, the send queue is no longer stalled by the unanswered ping
  • When sending a message to a node that is known to be asleep, the message's priority is automatically set to Wake Up (except for NoOperationCCs).

2.3.0 (2019-12-14)

Features

  • Using the env variable LOGTOFILE=true, the log output can now be redirected to a file instead of stdout.

Bugfixes

  • Updated alcalzone-shared lib to a working version
  • The parameter number during interview of Configuration CC is now logged correctly instead of [object Object].

Changes under the hood

  • Updated several dependencies

2.2.1 (2019-12-13)

Bugfixes

  • Removed deadlocks that happened when stopping the inclusion or exclusion process
  • The start and stop of an in- or exclusion process is now correctly announced using the inclusion started, inclusion stopped, exclusion started and exclusion stopped events.

2.2.0 (2019-12-11)

Bugfixes

  • Accessing a node's or endpoint's commandClasses property with Symbols no longer causes a crash
  • Revised querying logic for devices without Z-Wave+ or Lifeline associations

Features

  • Added support for Indicator CC

2.1.1 (2019-12-07)

Bugfixes

  • The serial port will now only be closed if it is already open. This causes less errors to be thrown when opening the port fails.

2.1.0 (2019-12-01)

Features

  • Added support for Meter CC

Bugfixes

  • Fixed a crash that happened when setting a configuration value that would not fit in the configured value size by marking many configuration parameters in device config files as unsigned.

Changes under the hood

  • The min/max value for configuration parameters in device config files is now validated

2.0.1 (2019-11-27)

Bugfixes

  • Fixed a crash that happened when saving the network cache with a CC that is neither supported nor controlled

Changes under the hood

  • Errors in stack traces are now mapped to the original TypeScript sources.

2.0.0 (2019-11-26)

Changes for users

  • The value updated event is no longer emitted for interviewComplete every time a command is received
  • Basic CC is no longer reported as supported when other actuator CCs are supported
  • If a node only controls a CC, the corresponding CCAPI is no longer falsely offered
  • The driver no longer overrides the CC version that was determined by the CC constructor
  • Binary Sensor CC is now correctly interviewed
  • Added a large amount of device configuration files. This powers the Configuration CC for versions <3 and enables lifeline associations for devices that don't support the Z-Wave+ standard.
  • Renamed a few manufacturers
  • When devices wake up that neither support Z-Wave+ nor have a lifeline association, all sensor and actuator CCs are queried for updated values

Bugfixes

  • Multi Channel CC no longer queries endpoint #0 if EndpointFind returns no results or only zeroes.
  • When values and metadata are deserialized from the cache, no more events are emitted. If you relied on this behavior, use getDefinedValueIDs() instead after the interview was completed.

Breaking changes

  • Added a new member to ValueID: property (number | string) replaces propertyName as the property identifier. propertyName is now in line with commandClassName and propertyKeyName and contains a speaking representation of the property

Changes under the hood

  • Deduplicated some code in the config lint script
  • Upgrade to TypeScript 3.7
  • The ccCommand properties' types are now specified using declare class fields instead of interface merging

1.7.0 (2019-11-03)

  • Support interviewing multi channel endpoints
  • Improve performance by not formatting logs that won't be visible
  • Multi Channel CC: Mark commandClasses property as internal
  • Upgrade to TypeScript 3.7 RC
  • Remove secondary switch functionality from Multilevel Switch CC
  • Implement interview procedure for Multilevel Switch CC
  • Upgrade Prettier and ESLint to make use of the new TS 3.7 syntax
  • Update Multilevel Sensor definitions to latest specs and rename some sensor types
  • Move sensor type and scale definitions to JSON config files
  • Extract named scales to their own configuration file
  • Also use scale configuration for Thermostat Setpoint CC
  • Improve error output for lint:config script
  • Upgrade serialport to version 8
  • Create CC instances for all endpoints in getDefinedValueIDs

1.6.0 (2019-10-23)

  • Implement Multi Channel Association CC and prefer it to Association CC if possible
  • Implement AssociationGroupInfoCC
  • Add support for CRC-16 CC
  • Bump Association CC to V3, which adds no new commands
  • Add setValue API to TimeParametersCC and use JS date objects
  • Add set value API to NodeNamingAndLocationCC
  • Add interview for Multilevel Sensor CC, fix scale parsing
  • Add interview for Thermostat Setback CC
  • Add interview for Central Scene CC
  • Filter out internal key value pairs in getDefinedValueIDs
  • Add tests (and the necessary snippets) for CC serialization and deserialization routines and fix the found errors:
    • Central Scene: fix calculation of scene bitmask size
    • Association Group Information: fix offset during parsing of InfoReport
    • (Multi Channel) Association: fix broken check for negative group IDs
    • Handle encapsulation (de)serialization correctly
  • Help GitHub understand that this is not a C(++)-repo
  • Add interview implemention to tracking issue
  • Moved supportsCommand from CommandClass to CCAPI
  • CC API methods now check that the underlying command is supported by the node
  • Improved handling of bit masks
  • Implement interview for ConfigurationCC, include spec changes
  • Don't interview CCs the VersionCC reports as unsupported
  • Cleanup loglevels for some log outputs
  • Update dependencies

1.5.0 (2019-10-06)

  • Add the remaining notification configurations:
    • Gas Alarm (0x12)
    • Pest Control (0x13)
    • Light Sensor (0x14)
    • Water Quality Monitoring (0x15)
    • Home monitoring (0x16)
  • Check all received request messages for a matching callback id
  • Add interview procedure for ThermostatSetpointCC
  • Add setValue API for ThermostatSetpointCC
  • Hide more CC values of newer CC versions
  • Fix translation of enum values to state metadata so it is able to handle strings starting with a number
  • Interview new nodes immediately after inclusion
  • Automatically determine the correct CC interview sequence
  • getDefinedValueIDs now returns statically defined, dynamically registered and created value IDs

1.4.0 (2019-10-03)

  • Partially re-interview CCs after restart from cache
  • Add interview procedure for BasicCC
  • Add the option to specify a minimum version for ccValues
  • Implement BatteryCC V2 (including API)
  • ThermostatOperatingStateCC: bump CC version
  • Add setValue API to WakeUp CC
  • Add more notification configurations:
    • Appliance (0x0C)
    • Home Health (0x0D)
    • Siren (0x0E)
    • Water Valve (0x0F)
    • Weather Alarm (0x10)
    • Irrigation (0x11)
  • Prepare for TS 3.7
  • Add missing callbackId to HardResetRequest
  • Create callback ids centrally on the driver instance
  • Implement TimeCC v2 and TimeParametersCC v1
  • TimeParametersCC: use local time if the node has no means to determine timezone
  • Add support for excluding nodes from the network
  • Update dependencies

1.3.1 (2019-09-25)

  • Mark options in IDriver as internal

1.3.0 (2019-09-04)

  • Add more notification configurations:
    • Power Management (0x08)
    • System (0x09)
    • Emergency Alarm (0x0A)
    • Clock (0x0B)
  • Implement node and network heal
  • Add method to enumerate serial ports
  • Mark readonly CCs

1.2.1 (2019-08-29)

  • Implement AssociationCC (V2)
  • fix CC interview not being done completely
  • Implement ThermostatModeCC (V3)
  • Implement ThermostatOperatingStateCC (V1)
  • Make a bunch of CC values internal
  • allow preventing notification variables from going idle
  • Add more notification configurations:
    • Access Control (0x06)
    • Water Alarm (0x05)
    • Heat Alarm (0x04)
    • CO2 Alarm (0x03)
    • CO Alarm (0x02)
  • add a lint step for config files
  • handle errors in config files more gracefully
  • dependency updates

1.1.1 (2019-08-25)

  • Drop messages with non-implemented CCs instead of crashing
  • Fix parsing of MultiChannelCC encapsulated CCs
  • Fix unwrapping of MultiChannelCCs inside ApplicationCommandRequests
  • Include config dir and TypeScript definitions in package
  • Move ansi-colors from dev to production dependencies

1.1.0 (2019-08-25)

  • Improve support for notification CC: named variables and events

1.0.1 (2019-08-20)

  • Fix log message for metadata updates
  • Remove unused dependencies, exports and methods
  • Fix broken setValue API test

1.0.0 (2019-08-19)

  • First working release