WeasyPrint for Laravel

A feature-rich Laravel wrapper for the WeasyPrint Document Factory.

See the Changelog | View the Upgrade Guide

Supported Versions
Installation
Usage
Contributing
Open Source

Supported Versions

The table below outlines supported versions, where current means it the latest supported version, and maintenance is supported by way of bug and security fixes only.

Note: As of version 8, WeasyPrint < 59 is not supported. If you rely on older versions, please use the applicable package version.

Note: As of version 8.1, WeasyPrint 61 is supported. Version 9 of the package will drop support for PHP 8.1, and WeasyPrint < 61.

Package Version	WeasyPrint Version	Laravel	PHP	Branch
`8.1.x` (latest)	`^59.0\|^60.0\|^61.0` (semver)	10.x, 11.x	8.1+	8.x
`8.0.x` (current)	`^59.0\|^60.0` (semver)	10.x	8.1+	8.x
`7.x` (maintenance)	≥ v53, < 59 (unchecked)	10.x	8.1+	7.x

Installation

First make sure WeasyPrint v59+ is installed on your system.

Then, install the package with Composer:

$ composer require rockett/weasyprint

The package will be discovered and registered automatically.

If you would like to publish the default configuration, you may run the command shown below. It’s not recommended to do this however, as the config file does read your environment variables. It is recommended to publish the config file only when you are changing the names of the variables, or you need to resolve them in another way.

$ php artisan vendor:publish --tag=weasyprint.config

Usage

WeasyPrint for Laravel is easy to use.

All you need is an instance of the WeasyPrint service class, which can be resolved from the Laravel Service Container as a scoped singleton.

Once you have an instance, you can prepare your source, change config (if needed), and build the output for processing by your application.

Getting a Service Instance

There are three ways to get an instance of the WeasyPrint service class.

Option 1. Using the Factory Contract

This contract may either be used in dependency injection, or via the global app() or resolve() helper functions.

Dependency Injection:

use WeasyPrint\Contracts\Factory;

class GeneratePDF
{
  public function __invoke(Factory $weasyprint)
  {
    // You now have access to a WeasyPrint instance named $weasyprint.
    $weasyprint->prepareSource('<p>WeasyPrint rocks!</p>');
  }
}

Global Helpers:

use WeasyPrint\Contracts\Factory;

$weasyprint = app(Factory::class); // or resolve(Factory::class)

// You now have access to a WeasyPrint instance named $weasyprint.
$weasyprint->prepareSource('<p>WeasyPrint rocks!</p>');

Option 2. Service Instance Helper

If you do not want to use dependency injection, and you do not want to use the app() or resolve() helpers, you can use the service instance helper instead. This is the same as calling one the global helpers.

use WeasyPrint\Service;

$weasyprint = Service::instance();
$weasyprint->prepareSource('<p>WeasyPrint rocks!</p>');

Option 3. Facade

Similar to the other options, using the Facade will give you an instance of the WeasyPrint service singleton. The Facade resolves to the Factory contract which, in turn, provides you with the singleton.

use WeasyPrint\Facade as WeasyPrint;

$source = '<p>WeasyPrint rocks!</p>';
$service = WeasyPrint::prepareSource($source);

Note: For the sake of simplicity, the facade option will be used throughout the remainder of this documentation.

Preparing the Source

Next step is to prepare the source – that is, the data WeasyPrint will use to render your PDF and return it to your application for processing.

The prepareSource method takes a single argument that represents your source data.

Here’s the method signature:

use WeasyPrint\Objects\Source;
use Illumintate\Support\Contracts\Renderable;

public function prepareSource(Source|Renderable|string $source): static

The $source argument may be one of the following:

WeasyPrint\Objects\Source if you are preparing a Source instance manually. The Source::new constructor accepts a Renderable or a string.
Illumintate\Support\Contracts\Renderable if you are passing in an instance of something that is renderable, ie it implements the render method. This might be a Laravel View, which also accepts an array of data. For more information, see the Laravel documentation on views.
string if you are passing in an already-rendered piece of HTML, or asking WeasyPrint to fetch and render the source from an external URL.

Source Object

If you would like to use the Source object, you may instantiate it as follows:

use WeasyPrint\Objects\Source;
use WeasyPrint\Facade as WeasyPrint;

$source = Source::new('<p>WeasyPrint rocks!</p>');
$service = WeasyPrint::prepareSource($source);

Renderable

A Renderable is simply a class that implements the Renderable contract, described above.

use Illumintate\Support\Contracts\Renderable;

class MyRenderable implements Renderable
{
  public function render(): string
  {
    return 'string with rendered HTML data…';
  }
}

// …

$service = WeasyPrint::prepareSource(new MyRenderable);

String

If you prefer to pass in a string:

use WeasyPrint\Facade as WeasyPrint;

$service = WeasyPrint::prepareSource('<p>WeasyPrint rocks!</p>');

Building the Output

Now that you know how to get a service class instance and prepare the source input, you are ready to build the output.

To do this, you can call the build() method, which will return an instance of WeasyPrint\Objects\Output.

$output = $service->build();

The $output object makes the following methods available:

public function download(string $filename, array $headers = [], bool $inline = false): StreamedResponse;

This method creates a Symfony StreamedResponse that may be used to download the PDF to the client (browser).

public function inline(string $filename, array $headers = []): StreamedResponse;

Likewise, this method does the same, except it uses an inline attachment so that it may be displayed in the browser. This is just a shorthand for download, setting $inline to true.

public function putFile(string $path, ?string $disk = null, array $options = []): bool;

This method forwards the data to Laravel’s Filesystem using the Storage facade’s put method, which gives you the ability to save the PDF to disk.

public function getData(): string;

This method returns the raw PDF data as a string.

Implicit Inference

If you would prefer to not call build(), you can simply omit it and call the methods that are available on the Output class. The service will implicitly build the PDF for you, and then call the applicable method on the output.

Attachments

WeasyPrint has the ability to add attachments to output PDFs. To add an attachment, call the addAttachment method:

$service = WeasyPrint::prepareSource('<p>WeasyPrint rocks!</p>')
  ->addAttachment('/absolute/path/to/attachment');
  ->addAttachment('/as/many/as/you/like');

Naturally this has no effect when outputting to PNG.

Config

This package comes preloaded with a sensible set of default configs. These defaults are sourced from the package directly, unless you publish the config into your application.

For additional type-safety, default config is prepared using the Config class. It must be cast to an array, and the service instance will automatically hydrate it when needed.

Once the default config has been loaded into a service instance, you can change it one of two ways:

Tap the Config

Tapping involves the use of a callback that mutates the existing Config object in the service instance, using the tapConfig method.

You need only change the properties you want to change, and everything else will remain untouched (derived from the defaults).

use WeasyPrint\Objects\Config;

$service->tapConfig(
  static function (Config $config): void {
    $config->binary = '/absolute/path/to/weasyprint';
    $config->timeout = 5000;
  }
);

Overriding the Config

To override the config with a brand new Config object, you can call setConfig, which accepts the object and sets it on the service instance.

use WeasyPrint\Objects\Config;

$service->setConfig(
  new Config(
    binary: '/absolute/path/to/weasyprint',
    timeout: 5000,
  )
);

Note: Unlike tapping, overriding the config will disregard any defaults that you might have set in your config file, or those set in the unpublished config file. Instead, the defaults are derived from the constructor of Config object.

Config Defaults

Below are the default config options, which you can override per the above.

return (array) new \WeasyPrint\Objects\Config(
  /**
   * The path to the WeasyPrint binary on your system. If it is available on
   * your system globally, the package will find and use it. If not, then
   * you will need to specify the absolute path.
   */
  binary: env('WEASYPRINT_BINARY'),

  /**
   * The cache prefix to use for the temporary filename.
   */
  cachePrefix: env('WEASYPRINT_CACHE_PREFIX', 'weasyprint_cache'),

  /**
   * The amount of seconds to allow a conversion to run for.
   */
  timeout: (int) env('WEASYPRINT_TIMEOUT', 120),

  /**
   * Force the input character encoding. utf-8 is recommended.
   */
  inputEncoding: env('WEASYPRINT_INPUT_ENCODING', 'utf-8'),

  /**
   * Enable or disable HTML Presentational Hints.
   */
  presentationalHints: (bool) env('WEASYPRINT_PRESENTATIONAL_HINTS', true),

  /**
   * Optionally set the media type to use for CSS @media.
   * Defaults to `print` at binary-level.
   */
  mediaType: env('WEASYPRINT_MEDIA_TYPE'),

  /**
   * Optionally set the base URL for relative URLs in the HTML input.
   */
  baseUrl: env('WEASYPRINT_BASE_URL'),

  /**
   * Optionally provide an array of stylesheets to use alongside the HTML input.
   * Each stylesheet may the absolute path to a file, or a URL.
   * It is recommended to do this at runtime.
   */
  stylesheets: [],

  /**
   * The environment variables passed to Symfony Process when executing
   * the WeasyPrint binary.
   */
  processEnvironment: ['LC_ALL' => env('WEASYPRINT_LOCALE', 'en_US.UTF-8')],

  /**
   * Optionally specify a PDF variant.
   */
  pdfVariant: WeasyPrint\Enums\PDFVariant::fromEnvironment('WEASYPRINT_PDF_VARIANT'),

  /**
   * Optionally specify a PDF version.
   */
  pdfVersion: WeasyPrint\Enums\PDFVersion::fromEnvironment('WEASYPRINT_PDF_VERSION'),

  /**
   * For debugging purposes, do not compress PDFs.
   */
  skipCompression: env('WEASYPRINT_SKIP_COMPRESSION', false),

  /**
   * Optimize the size of embedded images with no quality loss.
   */
  optimizeImages: env('WEASYPRINT_OPTIMIZE_IMAGES', false),

  /**
   * When possible, embed unmodified font files in the PDF.
   */
  fullFonts: env('WEASYPRINT_FULL_FONTS', false),

  /**
   * Keep hinting information in embedded font files.
   */
  hinting: env('WEASYPRINT_HINTING', false),

  /**
   * Set the maximum resolution of images embedded in the PDF.
   */
  dpi: env('WEASYPRINT_DPI', null),

  /**
   * Set the JPEG output quality, from 0 (worst) to 95 (best).
   */
  jpegQuality: env('WEASYPRINT_JPEG_QUALITY', null),

  /**
   * Render PDF forms from HTML elements.
   */
  pdfForms: env('WEASYPRINT_PDF_FORMS', false),
);

As noted before, you may publish the config file if you’d like to make changes to it – but, in most cases, you’ll want to make use of environment variables by adding them to your .env file or using whatever mechanism your app uses to resolve them.

Contributing

If you’d like to make a contribution to WeasyPrint for Laravel, you’re more than welcome to submit a merge request against the main or current-release branch:

If you are introducing a non-breaking change, target the V.x branch, where V is the latest major version of the package. If accepted and does not break any other versions either, it will also be merged into the applicable branches for those versions.
If you are introducing a breaking change of any kind, target the main branch. The change will be released in a new major version when accepted, and will not be added to older versions.

Your request should be as detailed as possible, unless it’s a trivial change.

Tests

Should it be required, please make sure that any impacted tests are updated, or new tests are created.

If you are introducing a new feature, you will more than likely need to create a new test case where each piece of functionality the new feature introduces may be tested.
Otherwise, if you are enhancing an existing feature by adding new functionality, you may add the appropriate test method to the applicable test case.

Then run the tests before opening your merge request:

$ composer run test

Formatting

This package uses johnbacon/stout to auto-format code. Before committing your code, please run a format over all dirty files:

$ composer run format

Commit Messages

Your commit message should be clear and concise. If you’re fixing a bug, start the message with bugfix:. If it’s a feature: feature:. If it’s a chore, like formatting code: chore:.

If you’d simply like to report a bug or request a feature, simply open an issue.

Open Source

Licensed under ISC, WeasyPrint for Laravel is an open-source project, and is free to use. In fact, it will always be open-source, and will always be free to use. Forever. 🎉

If you would like to support the development of WeasyPrint for Laravel, please consider making a small donation via PayPal.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

readme.md

readme.md

WeasyPrint for Laravel

Supported Versions

Installation

Usage

Getting a Service Instance

Option 1. Using the Factory Contract

Option 2. Service Instance Helper

Option 3. Facade

Preparing the Source

Source Object

Renderable

String

Building the Output

Implicit Inference

Attachments

Config

Config Defaults

Contributing

Tests

Formatting

Commit Messages

Open Source

Files

readme.md

Latest commit

History

readme.md

File metadata and controls

WeasyPrint for Laravel

Supported Versions

Installation

Usage

Getting a Service Instance

Option 1. Using the Factory Contract

Option 2. Service Instance Helper

Option 3. Facade

Preparing the Source

Source Object

Renderable

String

Building the Output

Implicit Inference

Attachments

Config

Config Defaults

Contributing

Tests

Formatting

Commit Messages

Open Source