EnOcean Binding

Introduction

<wiki:video url="http://www.youtube.com/watch?v=GpERJflmJKQ"/>

For installation of the binding, please see Wiki page [# !EnOcean Binding Configuration

openhab.cfg

The following config params are used for the !EnOcean binding.

• enocean:serialPort The serial port (can be a virtual one) where the enocean transceiver is connected to. An USB adapter creates a virtual serial port (normally /dev/ttyUSB0 under linux)

Example

f28f499f39ef60839adca05929150952

Generic Item Binding Configuration

Items

General format: 83b4c031a568c2505c1b46b91e0f4dd8

Supported Devices

These EEP Profiles are already supported. If your device is not listed, please add an issue for it at openhab.

• Rocker Switches
• F6:02:01 (Light and Blind Control - Application Style 1)
• Environment Sensors
• A5:02:05 (Temperature Range from 0° to 40°)

Soon supported:

• Contact Sensors
• D5:00:01 (Single Input Contact)

Rocker Switches

• eep = F6:02:01, F6:02:02
• channel = A / B
• parameter =
• I: The I button (normally the one with the solid arrow sign) was pressed (Switch, pressed=Update to ON, released=Update to OFF)
• O: The O button (normally the one with the empty arrow sign) was pressed (Switch, pressed=Update to ON, released=Update to OFF)

Be aware that the parameters are still under discussion and can be subject to change.

= Examples =

Standard usage: 118f4c278bd20577e9c323d2a72029c9

• pressed: ON
• released: OFF

To control a roller shutter: 0067df86ebf36144276dda80762257fe

• Short press down: Close roller shutter or stop it when it was started shortly ago
• Short press up: Open roller shutter or stop it when it was started shortly ago
• Long press down: Close roller shutter as long as the button is pressed
• Long press up: Open roller shutter as long as the button is pressed

See https://code.google.com/p/openhab-samples/wiki/ItemDef#How_to_control_a_homematic_roller_shutter_with_an_Rocker Example of roller shutter controlling

To control a dimmer (left buttons = channel A): Dimmer myLights () {enocean="{id=00:00:00:00, channel=A, eep=F6:02:01}"}

• Short press down: Switch light ON
• Short press up: Switch light OFF
• Long press down: Dim light UP as long as the button is pressed (INCREASE every 300ms)
• Long press up: Dim light DOWN as long as the button is pressed (DECREASE every 300ms)

To us as a normal Switch (supported with 1.4.0): Switch mySwitch () {enocean="{id=00:00:00:00, channel=A, eep=F6:02:01}"}

• Press down: Switch udated to ON
• Press up: Switch updated to OFF

Environment Sensors

• eep = A5:02:05
• channel = none
• parameter =
• TEMPERATURE: The current temperature (Number, unit=°C)

= Examples =

Number UG_Flur_Temp "Temperature [%.1f °C]" <temperature> () {enocean="{id=00:00:00:00, eep=A5:02:05, parameter=TEMPERATURE}"}

Contact Sensors

• eep = D5:00:01
• channel = none
• parameter =
• CONTACT_STATE: Contact Open / Closed (OpenClosedType)

Will work in 1.4.0

= Examples =

tbd

Controller Hardware

USB 300

USB stick to control EnOcean devices. Only supported controller for now. Part of the EnOcean Development Kit (EDK).

System Requirements / Special Installations

Synology DS213+

See this Openhab Forum entry for details.