Skip to content

Commit

Permalink
Update IPv6 branch according to main (#954)
Browse files Browse the repository at this point in the history
* Update mainline to reflect changes after the release. (#563)

* Update README.md

* Update History.txt

* Update version number macros

* Update manifest.yml

* IPv4/single SAME70 emac race condition (#567)

* Implemented Maty's solution

* Added a new statistic 'tx_write_fail'

* Uncrustify: triggered by comment.

Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: GitHub Action <[email protected]>

* IPv4/Single: Add a SocketID to a socket (#546)

* IPv4/Single: Add a SocketID to a socket

* Change in comment

* Applied uncrustify to format the source code

* Added a few entries to lexicon.txt

* Removed the 'ipconfigUSE_SetSocketID' option

* Change to lexicon.txt

* Add unit tests for the newly added API

Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: alfred gedeon <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>

* IPv4/single: SAME70 EMAC buffer sizes (#568)

* Implemented Maty's solution

* Added a new statistic 'tx_write_fail'

* Uncrustify: triggered by comment.

* Increase NETWORK_BUFFER_SIZE in order to include the 'ipBUFFER_PADDING' bytes

* ICMP checksum calculated manually

* Uncrustify: triggered by comment.

* Update gmac_SAM.c

Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: GitHub Action <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>

* Eliminate some warnings (#578)

* Eliminate some warnings related to print statements

Authored-by:  Pete Bone  <[email protected] >

* Add MISRA justification for use of dynamic memory (#581)

* Update deprecated macros in network driver files (#579)

* Update deprecated macros in network driver files

* Fix typo in RX driver.

* Replace #warning with #error on test for deprecated macro.

* Fix doxygen check

Co-authored-by: PeterB <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>

* Fix Network-interface of the Xilinx UltraScale port (#588)

The underlying issue was when the port would be used with Jumbo frames.
During receives of Jumbo packets the data length was always set
incorrectly, which then would cause buffer allocation issues and
subsequently corrupted data would be sent to the IP-task.

After some inspection in the Xilinx UltraScale port, I found out
that when the data length would be set, the wrong mask from the
Xilinx Ethernet MAC driver would be used. By using the right mask
(XEMACPS_RXBUF_LEN_JUMBO_MASK) when Jumbo Frame support is enabled
the issue was resolved

* Fix Windows thread calling vTaskSuspendAll / xTaskResumeAll. (#592)

Co-authored-by: Jason Carroll <[email protected]>

* Updated comments for FreeRTOS_select return value (#596)

* Updated comments for FreeRTOS_select return value

* Updated the function brief for FreeRTOS_select

* Uncrustify: triggered by comment.

* Updating FreeRTOS_select function @brief

* Updated function brief for FreeRTOS_SignalSocket

* Uncrustify: triggered by comment.

* Update source/FreeRTOS_Sockets.c

Co-authored-by: Ubuntu <[email protected]>
Co-authored-by: GitHub Action <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>

* Fixed readme script to build and run unit tests (#644)

* Minor warning fixes (#589)

* Eliminate compiler unused parameter warning

* Eliminate compiler unused variable warnings

* Eliminate compiler unused function warning

The function pcGetPHIName(...) would be called only in the
FreeRTOS_printf message, however FreeRTOS_printf maybe be defined
to nothing e.g. release builds, which then the warning would come up

* Rework callback setups in the EMAC-driver of the Xilinx UltraScale port

The calls to the function XEmacPs_SetHandler would trigger the
pedantic warning:

"ISO C forbids conversion of object pointer to function pointer type"

The reason for this, is that the second parameter of the function
XEmacPS_SetHandler is declared as pointer to a void type, but the
function "expects" a function pointer, which in setup_isr rightly
happens.

However IMHO, this is just bad code from the side of Xilinx, as not
on all architectures the size of a data pointer is identical to the
size of a function pointer, which also is correctly recognised by
the compiler.

Instead of using the "bad" function XEmacPs_SetHandler, we can set the
handlers manually to the EmacPS-instance.

* Uncrustify: triggered by comment.

* Update source/portable/NetworkInterface/xilinx_ultrascale/x_emacpsif_hw.c

Co-authored-by: Paul Bartell <[email protected]>

* Apply suggestions from code review

Co-authored-by: Paul Bartell <[email protected]>

* Address comments from reviews

Co-authored-by: GitHub Action <[email protected]>
Co-authored-by: Paul Bartell <[email protected]>

* Use CBMC XML output to enable VSCode debugger (#673)

Prior to this commit, CBMC would emit logging information in plain text
format, which does not contain information required for the CBMC VSCode
debugger. This commit makes CBMC use XML instead of plain text.

Co-authored-by: Mark Tuttle <[email protected]>

* Remove need of token

* Use vTaskDelay for sleep in the network-interface of xilinx_ultrascale (#698)

The issue here is that, the FreeRTOS IP-task would block all other
tasks during PHY-link speed negotiations, as it was using busy
waiting. However this is not really ideal. A much more suitable
function for such a task would be `vTaskDelay`.

* Make sure that a TCP socket is closed only once (#707)

* Make sure that a TCP socket is closed only once

* Fix failing test cases for FreeRTOS_TCP_IP unit test modules post PR#705 changes

* Uncrustify: triggered by comment.

* Fix failing test cases for FreeRTOS_TCP_IP unit test modules post PR - 705 changes

---------

Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: GitHub Action <[email protected]>

* Remove Dup function HAL_ETH_SetMDIOClockRange. (#711)

* Update PR template to include checkbox for ut change (#734)

* Main/TCP4 : ACK number in TCP RESET reply to SYN packet (#724)

* Main/TCP4 : ACK number in TCP RESET reply to SYN packet

* Typo fix

* Add unit-test for coverage; Fix ntohl to htonl

* Fix unit-test

---------

Co-authored-by: Nikhil Kamath <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>

* #556 Initial Cmake Module definition. (#557)

* #556 Initial Cmake Module definition.

* Fixing CI builds, rely on pcap. (#556)

* Updating tested configurations and minor clean-up of missing network interfaces (#555)

* Further clean-up based on testing with build environment. (#555)

* Using single definition for libraries everywhere. (#555)

* Fixing A_CUSTOM_NETWORK_IF compile option.

* Identifying and fixing compile issues.

* Adding in additional warnings for GNU to ignore for now.

* Fixing formatting issues with uncrustify.

* More warnings for GNU used by CI/CD pipeline.

* Assuming custom for build tests and using latest freertos-kernel code.  Updated readme for how to consume at project level.

* Fixing up issues identified in the PR. Making the build_test EXCLUDE_FROM_ALL so only compiled if requested.

* Changing to support C89 instead of C99. Renaming tcp_tools to tcp_utilities to mimic the directory.

* Using C90 ISO.  Fixing compiler warnings.

* Fixing non C90 compliant declaration after statement

* Separating out CMakeLists so each port is independent.

* Updating warning list in code.

* Fixed formatting with uncrustify.

* Fix failing tests

* Fix failing unit-test

* Fix a typo.

---------

Co-authored-by: Aniruddha Kanhere <[email protected]>

* CMake: Fix GIT_REPOSITORY and GIT_TAG (#742)

* Allow use of loopback addresses in IP stack (127.0.0.0/8) (#754)

Authored-by: Adam St. Amand <[email protected]>

* Add release candidate automation (#761)

This is a minimal subset of release automation which only creates a tag
and verifies it.

Signed-off-by: Gaurav Aggarwal <[email protected]>

* Add CBMC-running GitHub Action;

This commit adds a GitHub Action that runs the CBMC proofs in this
repository upon pushes and pull requests

* Copy CBMC output directory to CI location

This commit ensures that the output directory for CBMC proofs is in the
correct location expected by the FreeRTOS CI-CD repository.

* rx: Read mac address using FreeRTOS_GetMACAddress() rather than using the defines (#765)

* Read mac address using FreeRTOS_GetMACAddress() rather than using the defines
---------
Co-authored-by: GitHub Action <[email protected]>

* cmake: Remove add_subdirectory( cbmc ) call

CBMC proofs cannot currently be run using CMake.

fixes #753

* FreeRTOS_IP.h: Fix build error introduced by 55658e1 in FreeRTOS-Kernel

* Add Nxp1060 network interface (#774)

* Update PR template to include checkbox for ut change

* Create NetworkInterface.c

* Uncrustify: triggered by comment.

* Address PR comments

* Uncrustify: triggered by comment.

* Update NetworkInterface.c

* Uncrustify: triggered by comment.

* Update copyright year

* Refactor the init function. Add 'brief'. Cleanup.

* Uncrustify: triggered by comment.

* Update global link status only when the network is quiet

* Uncrustify: triggered by comment.

* Update copyright yeat

* Update the driver to deal with network cable disconnects

* Uncrustify: triggered by comment.

* Update NetworkInterface.c

* Clean up and address PR comments

* More cleanup and address PR comments

* Uncrustify: triggered by comment.

* Empty-Commit

* Address issue comments

* Uncrustify: triggered by comment.

* Empty-Commit to trigger workflow

* Remove Full-Duplex restriction

* Uncrustify: triggered by comment.

* Empty-Commit to trigger workflow

---------

Co-authored-by: GitHub Action <[email protected]>

* Correct GCC warnings (#798)

* Correct GCC warnings

Corrects warnings with current GCC flags
for GCC 7.5.0. The only suppressed warning pertains
to function to object pointer conversion which is
required and common for socket callbacks.

* PR feedback

---------

Co-authored-by: Ubuntu <[email protected]>
Co-authored-by: Nikhil Kamath <[email protected]>

* Cleanup of NXP1060 network driver (#801)

* Update PR template to include checkbox for ut change

* Empty-Commit to trigger workflow

* Fix issues pointed out in PR comments

* Uncrustify: triggered by comment.

* Empty-Commit to trigger workflow

---------

Co-authored-by: GitHub Action <[email protected]>

* Fix Clang warnings (#809)

Corrects several warnings from Clang flags
for Clang 13.

Inspired by @phelter's bug report
#558

* uncrustify yml fix (#815)

* Add NetworkDown notification to NetworkInterface.c [PR: #671] (#812)

* Add NetworkDown notification to EMAC task

* Add NetworkDown notification to NetworkInterface.c

* Uncrustify: triggered by comment.

* Introduce ipconfigSUPPORT_NETWORK_DOWN_EVENT compile flag

* Fix formatting

* Uncrustify: triggered by comment.

---------

Co-authored-by: Filip Oleszek <[email protected]>
Co-authored-by: zipperowiec <[email protected]>
Co-authored-by: GitHub Action <[email protected]>

* Uncrustify bot command fix (#816)

* fix uncrustify run command

* test uncrustify

* Revert "test uncrustify"

This reverts commit f660ab4.

* Fix uncrustify bot command - disable install prompt (#819)

* fix uncrustify run command

* test uncrustify

* Revert "test uncrustify"

This reverts commit f660ab4.

* removing apt-get prompt while installing git

* Removing deprecated set-output command from uncrustify bot run yml (#820)

* fix uncrustify run command

* test uncrustify

* Revert "test uncrustify"

This reverts commit f660ab4.

* removing apt-get prompt while installing git

* removing the deprecated set-output command from uncrustify bot run yml, use latest git

* IPv4/Single: Let send() stop blocking after a connection reset (#561)

* IPv4/Single: Let send() stop after a protocol error

* Remove token need

* Repaired unit-testing

* Added the cunftion test_FreeRTOS_send_DisconnectionOccursDuringWait()

* Added a comment for unit-test function test_FreeRTOS_send_DisconnectionOccursDuringWait()

* Added an item to lexicon.txt

* Restored original tcp_utilities

* Restored original tcp_utilities, once more

---------

Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>
Co-authored-by: Nikhil Kamath <[email protected]>

* Add logs to print random number generation failure (#908)

Add logs to print random number generation failure for better debugging of issue.

* Update usage of uint64_t according to C90 standard (#907)

Co-authored-by: kar-rahul-aws <[email protected]>

* Fix pragma pack in CCS compiler to push/pop (#906)

`#pragma pack(1)` would make it so that all structs inserted after pack_struct_start.h
was included for the TI arm compiler would be packed, leading to potential unaligned memory access error.
Refer: https://www.ti.com/lit/ug/spnu151w/spnu151w.pdf SECTION 5.11.23

* Modified libslirp backend file to cover different libslirp library versions (#929)

Authored-by: Xiaodong Li <[email protected]>

* Update according to devIntegration

* Update links to point to main directory

---------

Signed-off-by: Gaurav Aggarwal <[email protected]>
Co-authored-by: Aniruddha Kanhere <[email protected]>
Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: Hein Tibosch <[email protected]>
Co-authored-by: GitHub Action <[email protected]>
Co-authored-by: alfred gedeon <[email protected]>
Co-authored-by: Pete Bone <[email protected]>
Co-authored-by: PeterB <[email protected]>
Co-authored-by: ChristosZosi <[email protected]>
Co-authored-by: jasonpcarroll <[email protected]>
Co-authored-by: Jason Carroll <[email protected]>
Co-authored-by: Tony Josi <[email protected]>
Co-authored-by: Ubuntu <[email protected]>
Co-authored-by: Paul Bartell <[email protected]>
Co-authored-by: Kareem Khazem <[email protected]>
Co-authored-by: Mark Tuttle <[email protected]>
Co-authored-by: Tony Josi <[email protected]>
Co-authored-by: ActoryOu <[email protected]>
Co-authored-by: Nikhil Kamath <[email protected]>
Co-authored-by: phelter <[email protected]>
Co-authored-by: Adam St. Amand <[email protected]>
Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
Co-authored-by: sayyadumar <[email protected]>
Co-authored-by: Paul Bartell <[email protected]>
Co-authored-by: Kody Stribrny <[email protected]>
Co-authored-by: Ubuntu <[email protected]>
Co-authored-by: Filip Oleszek <[email protected]>
Co-authored-by: zipperowiec <[email protected]>
Co-authored-by: kar-rahul-aws <[email protected]>
Co-authored-by: Rahul Arasikere <[email protected]>
Co-authored-by: Xiaodong Li <[email protected]>
  • Loading branch information
1 parent 0d64b43 commit 6a9e73f
Show file tree
Hide file tree
Showing 6 changed files with 61 additions and 15 deletions.
35 changes: 35 additions & 0 deletions .github/workflows/release-candidate.yml
Original file line number Diff line number Diff line change
@@ -0,0 +1,35 @@
name: Release Candidate Automation

on:
workflow_dispatch:
inputs:
commit_id:
description: 'Commit ID to tag'
required: true
version_number:
description: 'Release Version Number (Eg, v1.0.0-rc1)'
required: true

jobs:
tag-commit:
name: Tag commit
runs-on: ubuntu-latest
steps:
- name: Checkout code
uses: actions/checkout@v2
with:
ref: ${{ github.event.inputs.commit_id }}
- name: Configure git identity
run: |
git config --global user.name ${{ github.actor }}
git config --global user.email ${{ github.actor }}@users.noreply.github.com
- name: Tag Commit and Push to Remote
run: |
git tag ${{ github.event.inputs.version_number }} -a -m "FreeRTOS-Plus-TCP Library ${{ github.event.inputs.version_number }}"
git push origin --tags
- name: Verify tag on remote
run: |
git tag -d ${{ github.event.inputs.version_number }}
git remote update
git checkout tags/${{ github.event.inputs.version_number }}
git diff ${{ github.event.inputs.commit_id }} tags/${{ github.event.inputs.version_number }}
6 changes: 3 additions & 3 deletions GettingStarted_4.0.0-rc3.md
Original file line number Diff line number Diff line change
@@ -1,7 +1,7 @@
Moving to 4.0.0-rc1/rc2/rc3 from 3.x.x:
--------------------------------

Version 4.0.0-rc1/rc2/rc3 adds new files to support IPv6 functionality, breaking each file into logically separated IPv4 and IPv6 files. The folder structure of FreeRTOS-Plus-TCP remains unchanged. Build separation is added to make the library modular, enabling users to compile and create a low-footprint binary with only the required functionalities. For more details on supported build combinations, see [History.txt](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/dev/IPv6_integration/History.txt) .
Version 4.0.0-rc1/rc2/rc3 adds new files to support IPv6 functionality, breaking each file into logically separated IPv4 and IPv6 files. The folder structure of FreeRTOS-Plus-TCP remains unchanged. Build separation is added to make the library modular, enabling users to compile and create a low-footprint binary with only the required functionalities. For more details on supported build combinations, see [History.txt](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/main/History.txt) .

Some of the APIs have changed which is illustrated in the section below. However, there is a backward compatibility mode provided as well.

Expand Down Expand Up @@ -67,9 +67,9 @@ Change 7:

Running Demos:
-------------
The demos can be found at: https://github.com/FreeRTOS/FreeRTOS/tree/devIPv6/FreeRTOS-Plus/Demo
The demos can be found on [this page](https://github.com/FreeRTOS/FreeRTOS/tree/main/FreeRTOS-Plus/Demo).

In all the demos, there is a backward compatibility mode which can be enabled by setting the flag “ipconfigIPv4_BACKWARD_COMPATIBLE” to 1 in the header file “FreeRTOSIPConfigDefaults.h”.
This flag is by default set to zero.

New IPv6 WinSim Demo: https://github.com/FreeRTOS/FreeRTOS/tree/devIPv6/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_IPv6_Demo/IPv6_Multi_WinSim_demo
New IPv6 WinSim Demo can be found on [this page](https://github.com/FreeRTOS/FreeRTOS/tree/main/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_IPv6_Demo/IPv6_Multi_WinSim_demo).
8 changes: 4 additions & 4 deletions History.txt
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Changes between dev/ipv6_integration branch 4.0.0-RC3 and 4.0.0-RC2 releases:
Changes between 4.0.0-RC3 and 4.0.0-RC2 releases:
+ Added memory safety proofs for IPv6 using[ CBMC automated reasoning tool ] ( https:/*www.cprover.org/cbmc/)
+ Introduced build separation feature to achieve low memory footprint. Supported build combinations:
1. IPv4 + UDP
Expand All @@ -8,13 +8,13 @@ Changes between dev/ipv6_integration branch 4.0.0-RC3 and 4.0.0-RC2 releases:
5. IPv4 + IPv6 + UDP
6. IPv4 + IPv6 + UDP + TCP

Changes between dev/ipv6_integration branch 4.0.0-RC2 and 4.0.0-RC1 releases:
Changes between 4.0.0-RC2 and 4.0.0-RC1 releases:
+ Added changes to fix IPv6 issues observed by Maxwell protocol tester.

Changes between dev/ipv6_integration branch RC1 and main branch V3.0.0 releases:
Changes between RC1 and V3.0.0 releases:
+ Unified code for IPv4 and IPv6
+ Multiple Interface/Endpoint support
((Reference: https://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/freertostcp-multiple-interfaces.html).
(Reference: https://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/freertostcp-multiple-interfaces.html).
+ New WinSim demo to support both IPv4 and IPv6.
**Note**- This release does not support ESP32/ M487/ mw300_rd ports yet. This will be released soon.

Expand Down
8 changes: 4 additions & 4 deletions README.md
Original file line number Diff line number Diff line change
@@ -1,16 +1,16 @@
## NOTE - Work In Progress
## Introduction

This branch contains unified IPv4 and IPv6 functionalities.
Refer to the Getting started Guide (found [here](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/dev/IPv6_integration/GettingStarted_4.0.0-rc3.md)) for more details.
Refer to the Getting started Guide (found [here](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/main/GettingStarted_4.0.0-rc3.md)) for more details.

## FreeRTOS-Plus-TCP Library
FreeRTOS-Plus-TCP is a lightweight TCP/IP stack for FreeRTOS. It provides a familiar Berkeley sockets interface, making it as simple to use and learn as possible. FreeRTOS-Plus-TCP's features and RAM footprint are fully scalable, making FreeRTOS-Plus-TCP equally applicable to smaller lower throughput microcontrollers as well as larger higher throughput microprocessors.

This library has undergone static code analysis and checks for compliance with the [MISRA coding standard](https://www.misra.org.uk/). Any deviations from the MISRA C:2012 guidelines are documented under [MISRA Deviations](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/main/MISRA.md). The library is validated for memory safety and data structure invariance through the [CBMC automated reasoning tool](https://www.cprover.org/cbmc/) for the functions that parse data originating from the network. The library is also protocol tested using Maxwell protocol tester for both IPv4 and IPv6.

## Getting started
The easiest way to use the 4.0.0-rc3 version of FreeRTOS-Plus-TCP is to refer to to the Getting started Guide (found [here](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/dev/IPv6_integration/GettingStarted_4.0.0-rc3.md))
Another way is to start with the pre-configured demo application project (found in [this directory](https://github.com/FreeRTOS/FreeRTOS/tree/devIPv6/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Minimal_Windows_Simulator)). That way you will have the correct FreeRTOS source files included, and the correct include paths configured. Once a demo application is building and executing you can remove the demo application files, and start to add in your own application source files. See the [FreeRTOS Kernel Quick Start Guide](https://www.freertos.org/FreeRTOS-quick-start-guide.html) for detailed instructions and other useful links.
The easiest way to use the 4.0.0-rc3 version of FreeRTOS-Plus-TCP is to refer to to the Getting started Guide (found [here](https://github.com/FreeRTOS/FreeRTOS-Plus-TCP/blob/main/GettingStarted_4.0.0-rc3.md))
Another way is to start with the pre-configured demo application project (found in [this directory](https://github.com/FreeRTOS/FreeRTOS/tree/main/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Minimal_Windows_Simulator)). That way you will have the correct FreeRTOS source files included, and the correct include paths configured. Once a demo application is building and executing you can remove the demo application files, and start to add in your own application source files. See the [FreeRTOS Kernel Quick Start Guide](https://www.freertos.org/FreeRTOS-quick-start-guide.html) for detailed instructions and other useful links.

Additionally, for FreeRTOS-Plus-TCP source code organization refer to the [Documentation](http://www.FreeRTOS.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Networking_Tutorial.html), and [API Reference](https://freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/FreeRTOS_TCP_API_Functions.html).

Expand Down
8 changes: 4 additions & 4 deletions source/FreeRTOS_UDP_IP.c
Original file line number Diff line number Diff line change
Expand Up @@ -90,7 +90,7 @@ UDPPacketHeader_t xDefaultPartUDPPacketHeader =
* @brief Process the generated UDP packet and do other checks before sending the
* packet such as ARP cache check and address resolution.
*
* @param[in] pxNetworkBuffer: The network buffer carrying the packet.
* @param[in] pxNetworkBuffer The network buffer carrying the packet.
*/
void vProcessGeneratedUDPPacket( NetworkBufferDescriptor_t * const pxNetworkBuffer )
{
Expand Down Expand Up @@ -128,9 +128,9 @@ void vProcessGeneratedUDPPacket( NetworkBufferDescriptor_t * const pxNetworkBuff
/**
* @brief Process the received UDP packet.
*
* @param[in] pxNetworkBuffer: The network buffer carrying the UDP packet.
* @param[in] usPort: The port number on which this packet was received.
* @param[out] pxIsWaitingForARPResolution: If the packet is awaiting ARP resolution,
* @param[in] pxNetworkBuffer The network buffer carrying the UDP packet.
* @param[in] usPort The port number on which this packet was received.
* @param[out] pxIsWaitingForARPResolution If the packet is awaiting ARP resolution,
* this pointer will be set to pdTRUE. pdFALSE otherwise.
*
* @return pdPASS in case the UDP packet could be processed. Else pdFAIL is returned.
Expand Down
11 changes: 11 additions & 0 deletions test/build-combination/Common/main.c
Original file line number Diff line number Diff line change
Expand Up @@ -213,6 +213,17 @@ void vApplicationIdleHook( void )

/*-----------------------------------------------------------*/

void vLoggingPrintf( const char * pcFormat,
... )
{
va_list arg;

va_start( arg, pcFormat );
vprintf( pcFormat, arg );
va_end( arg );
}
/*-----------------------------------------------------------*/

void getUserCmd( char * pucUserCmd )
{
/* Provide a stub for this function. */
Expand Down

0 comments on commit 6a9e73f

Please sign in to comment.