evohome-munin

Munin plugin for monitoring room/zone temperatures controlled by the Evohome of Honeywell

Plugin to show setpoint and measured temperature of zone. Also show the outside temperature based on location

To make this plugin work make sure you install the following:

evohome-client

evohomeclient http://evohome-client.readthedocs.org/en/latest/

pip install evohomeclient

Note: Version 0.3.1 or later of the evohomeclient library is now required, so please update the library if you are updating an existing evohome-munin installation. To check your existing version:

pip show evohomeclient

To upgrade an existing library:

pip install --upgrade evohomeclient

python-munin framework

http://samuelks.com/python-munin/

wget https://github.com/samuel/python-munin/archive/master.zip
unzip master.zip
cd python-munin-master/
python setup.py build
python setup.py install

python-weather-api

https://code.google.com/p/python-weather-api/ (using a new fork from github)

wget https://github.com/danbraun/pywapi/archive/master.zip -O pywapi.zip
unzip pywapi.zip
cd pywapi-master
python setup.py build
python setup.py install

If this doesn't work use the manual install:

wget https://launchpad.net/python-weather-api/trunk/0.3.8/+download/pywapi-0.3.8.tar.gz
tar xzvf pywapi-0.3.8.tar.gz
cd  pywapi-0.3.8
python setup.py build
python setup.py install

Munin setup

Find your plugins directory, this is depended on your OS ex: /etc/munin/plugin-conf.d/plugins and place the following there:

[evohome*]
user root

Download https://github.com/Infern1/evohome-munin/blob/master/evohome_

and place it in your munin plugin folder eg.

wget https://raw.githubusercontent.com/Infern1/evohome-munin/master/evohome_
/usr/local/share/munin/plugins/
or
/etc/munin/plugins

To activate the plugin make a symlink:

ln -s /usr/local/share/munin/plugins/evohome_ /usr/local/etc/munin/plugins/evohome_Zonename

Notice, this symlink is depended on your system/OS For example some system it should be:

ln -s /usr/share/munin/plugins/evohome_ /etc/munin/plugins/evohome_Zonename

For zone names containing spaces, replace the spaces with underscores in the symlink name

Zone names are case sensitive and must match the case entered on the Evotouch controller

Further set your username and password for the honeywell portal in the file evohome_

For correct outside temperature lookup your location code at http://weather.com

    username = '[email protected]' 
    password = 'yoursecretpassword'
    location = 'NLXX0010'  

If you have hot water control also download https://github.com/Infern1/evohome-munin/blob/master/evohome_Hot_Water

and place it directly in your active munin plugin folder eg.

wget https://raw.githubusercontent.com/Infern1/evohome-munin/master/evohome_Hot_Water
/usr/local/etc/munin/munin/plugins/evohome_Hot_Water
or
/etc/munin/plugins

Set your username and password for the honeywell portal in the file evohome_Hot_Water as you did with evohome_ also set your configured system hot water temperature for graphing purposes as this is not provided by the API.

Example