- Download QMK-toolbox, found here.
- Download the .hex file under the
Code-tab, then you find it under releases. - Make sure that the reciever is discovered, if successful a message will appear.
*** Unknown: Mitosis connected -- FEED:0000:0000
- Load the .hex file that you downloaded with the "Local file"-field.
- Reset the reciever by pressing the button closest to the micro USB connector.
- Now a yellow line should be printed.
*** Caterina device connected: Arduino Micro bootloader (COM3) -- 0000:0000:0000
- Quickly press flash, you only have a couple of seconds!
- A message like this should now appear.
*** Attempting to flash, please don't remove device
- If successful, you will see this print out.
avrdude.exe: verifying ...
avrdude.exe: 22904 bytes of flash verified
avrdude.exe done. Thank you.
You are now DONE, congratulations!