chore: release 1.41.0 #7188
WesleyRosenblumci.yml
on: pull_request
env
13s
rustfmt
13s
udeps
2m 28s
doc
4m 15s
fips
5m 43s
no_std
26s
compliance
22s
coverage
9m 8s
recovery-simulations
45s
sims
6m 18s
copyright
4s
events
22s
snapshots
6m 5s
timing
1m 26s
typos
4s
dhat
3m 58s
xdp
2m 36s
Matrix: clippy
Matrix: dc-wireshark
Matrix: kani
Matrix: loom
Matrix: miri
Matrix: crates
Matrix: examples
Matrix: test
Annotations
202 warnings
|
typos
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
typos
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
compliance
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
compliance
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
compliance
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
compliance
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
compliance
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1, camshaft/install@v1, aws-actions/[email protected], ouzi-dev/[email protected]. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
compliance
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1, camshaft/install@v1, aws-actions/[email protected], ouzi-dev/[email protected]. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
events
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
events
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
events
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
events
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
no_std
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
no_std
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
no_std
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
no_std
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
recovery-simulations
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
recovery-simulations
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
recovery-simulations
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
recovery-simulations
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
miri (quic/s2n-quic-platform)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
miri (quic/s2n-quic-platform)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
miri (quic/s2n-quic-platform)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
miri (quic/s2n-quic-platform)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/rustls-provider)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/rustls-provider)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/rustls-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/rustls-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/rustls-mtls)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/rustls-mtls)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/rustls-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/rustls-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/custom-congestion-controller)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/custom-congestion-controller)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/custom-congestion-controller)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/custom-congestion-controller)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/jumbo-frame)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/jumbo-frame)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/jumbo-frame)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/jumbo-frame)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/s2n-mtls)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/s2n-mtls)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/s2n-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/s2n-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/unreliable-datagram)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/unreliable-datagram)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/unreliable-datagram)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/unreliable-datagram)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/dos-mitigation)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/dos-mitigation)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/dos-mitigation)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/dos-mitigation)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/async-client-hello-callback)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/async-client-hello-callback)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/async-client-hello-callback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/async-client-hello-callback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/turmoil-provider)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/turmoil-provider)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/turmoil-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/turmoil-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/resumption)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/resumption)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/resumption)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/resumption)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/event-framework)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/event-framework)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/event-framework)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/event-framework)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/echo)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/echo)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/echo)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/echo)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
udeps
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1, camshaft/install@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
udeps
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
udeps
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
udeps
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
xdp
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
xdp
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
xdp
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
xdp
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
dc-wireshark (ubuntu-latest)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
dc-wireshark (ubuntu-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
dc-wireshark (ubuntu-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
dc-wireshark (ubuntu-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy (stable, -D warnings)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
clippy (stable, -D warnings)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
clippy (stable, -D warnings)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy (stable, -D warnings)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy (beta)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
clippy (beta)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
clippy (beta)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy (beta)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
dc-wireshark (macOS-latest)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
dc-wireshark (macOS-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
dc-wireshark (macOS-latest)
Treating wireshark as a formula. For the cask, use homebrew/cask/wireshark or specify the `--cask` flag.
|
|
dc-wireshark (macOS-latest)
pkg-config 0.29.2_3 is already installed and up-to-date.
To reinstall 0.29.2_3, run:
brew reinstall pkg-config
|
|
dc-wireshark (macOS-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
dc-wireshark (macOS-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
dhat
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
dhat
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
dhat
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
dhat
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/post-quantum)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
examples (examples/post-quantum)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
examples (examples/post-quantum)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
examples (examples/post-quantum)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
doc
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
doc
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
doc
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
doc
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (beta, macOS-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (beta, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (beta, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (beta, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, macOS-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (1.71.1, macOS-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (1.71.1, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (1.71.1, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (1.71.1, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
fips
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
fips
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
fips
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
fips
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (beta, windows-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (beta, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (beta, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (beta, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (1.71.1, windows-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (1.71.1, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (1.71.1, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (1.71.1, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
snapshots
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
snapshots
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
snapshots
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
snapshots
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
sims
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
sims
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
sims
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
sims
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (nightly-2024-04-16, macOS-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (nightly-2024-04-16, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (nightly-2024-04-16, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (nightly-2024-04-16, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (beta, ubuntu-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (beta, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (beta, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (beta, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (nightly-2024-04-16, ubuntu-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (nightly-2024-04-16, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (nightly-2024-04-16, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (nightly-2024-04-16, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (1.71.1, ubuntu-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (1.71.1, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (1.71.1, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (1.71.1, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (nightly-2024-04-16, windows-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (nightly-2024-04-16, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (nightly-2024-04-16, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (nightly-2024-04-16, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, windows-latest, native, default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
coverage
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
coverage
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
coverage
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
coverage
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
miri (quic/s2n-quic-core)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
miri (quic/s2n-quic-core)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
miri (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
miri (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/install@v1, camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
loom (quic/s2n-quic-core)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: camshaft/rust-cache@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
|
loom (quic/s2n-quic-core)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
loom (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
loom (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|