⬆️ Update esphome to v2024.11.1

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
esphome	==2024.10.3 -> ==2024.11.1

---

Warning

Some dependencies could not be looked up. Check the Dependency Dashboard for more information.

---

Release Notes

esphome/esphome (esphome)

v2024.11.1

Compare Source

• [http_request] Fix within context with parameters. (Bugfix) esphome#7790 by @​clydebarrow
• [rtttl] Clamp gain between 0 and 1 esphome#7793 by @​jesserockz
• [speaker] Add missing auto-load for audio esphome#7794 by @​jesserockz
• [qspi_dbi] Fix garbled graphics on RM690B0 esphome#7795 by @​manuelkasper
• Check for min_version earlier in validation esphome#7797 by @​spuder
• Fix for OTA mode not activating in safe_mode when OTA section has an on_xxxx action esphome#7796 by @​Dilbert66
• Ensure storage I/O for ignored devices runs in the executor esphome#7792 by @​bdraco

v2024.11.0

Compare Source

Full list of changes

New Features

• Support ignoring discovered devices from the dashboard esphome#7665 by @​jesserockz (new-feature)
• [media_player] Add new media player conditions esphome#7667 by @​kahrendt (new-feature)

New Components

• Add TC74 temperature sensor esphome#7460 by @​sethgirvan (new-integration)
• Add support for Analog Devices MAX17043 battery fuel gauge esphome#7522 by @​blacknell (new-integration)
• [speaker, i2s_audio] I2S Speaker implementation using a ring buffer esphome#7605 by @​kahrendt (new-integration)
• [axs15231] Touchscreen driver esphome#7592 by @​clydebarrow (new-integration)
• i2c_device esphome#7641 by @​gabest11 (new-integration)
• [es8311] Add es8311 dac component esphome#7693 by @​kahrendt (new-integration)
• Add OpenTherm component (part 3: rest of the sensors) esphome#7676 by @​olegtarasov (new-integration)

New Platforms

• [qspi_dbi] Rename from qspi_amoled, add features esphome#7594 by @​clydebarrow (breaking-change) (new-platform)
• Add OpenTherm component (part 2.1: sensor platform) esphome#7529 by @​olegtarasov (new-platform)

Breaking Changes

• [qspi_dbi] Rename from qspi_amoled, add features esphome#7594 by @​clydebarrow (breaking-change) (new-platform)
• [lvgl] light schema should require widget: not led: (Bugfix) esphome#7649 by @​clydebarrow (breaking-change)
• [http_request] Always return defined server response status esphome#7689 by @​clydebarrow (breaking-change)
• [touchscreen] Calibration fixes esphome#7704 by @​clydebarrow (breaking-change)
• [spi_device] rename mode to spi_mode esphome#7724 by @​clydebarrow (breaking-change)
• Update UNIT_VOLT_AMPS_REACTIVE = "var" (Currently 'VAR') esphome#7643 by @​Roving-Ronin (breaking-change)

Beta Changes

• Fix temperature and humidity for bme680 with bsec2 esphome#7728 by @​luar123
• [i2s_audio] Bugfix: Adjust I2S speaker setup priority esphome#7759 by @​kahrendt
• Update UNIT_VOLT_AMPS_REACTIVE = "var" (Currently 'VAR') esphome#7643 by @​Roving-Ronin (breaking-change)
• Fix reactive power unit of measurement from VAR to var esphome#7757 by @​felipecrs
• Disable bluetooth proxy during update esphome#7695 by @​jzucker2
• ld2420: fix typo in log message esphome#7758 by @​bfabio
• TuyaFan control should use oscillation_type esphome#7776 by @​pethans
• Bump esphome-dashboard to 2024111.0 esphome#7782 by @​jesserockz
• [http_request] Feed watchdog timeout around http request functions esphome#7786 by @​jesserockz
• Bump esphome-dashboard to 2024112.0 esphome#7787 by @​jesserockz

All changes

• Update pillow to 10.4.0 esphome#7566 by @​hostcc
• Bump actions/upload-artifact from 4.4.2 to 4.4.3 esphome#7575 by @​dependabot[bot]
• [fix] ESP32-C6 Reset Reasons esphome#7578 by @​rvalitov
• [light] Add initial_state configuration esphome#7577 by @​jesserockz
• [CI] failures when installing using apt-get. esphome#7593 by @​clydebarrow
• [web_server] expose event compoent to REST esphome#7587 by @​RFDarter
• Update test_build_components esphome#7597 by @​tomaszduda23
• [fix] ESP32-C6: internal temperature reporting esphome#7579 by @​rvalitov
• [code-quality] statsd component esphome#7603 by @​tomaszduda23
• [automation] Implement all and any condition shortcuts esphome#7565 by @​clydebarrow
• Add TC74 temperature sensor esphome#7460 by @​sethgirvan (new-integration)
• [display] filled_ring and filled_gauge methods added esphome#7420 by @​artemyevav
• [fix] deprecated functions warnings for logger component with ESP IDF version 5.3.0+ esphome#7600 by @​rvalitov
• [lvgl] Implement better software rotation esphome#7595 by @​clydebarrow
• [qspi_dbi] Rename from qspi_amoled, add features esphome#7594 by @​clydebarrow (breaking-change) (new-platform)
• Add support for Analog Devices MAX17043 battery fuel gauge esphome#7522 by @​blacknell (new-integration)
• chore: bump pyyaml to 6.0.2 to support py3.13 build esphome#7610 by @​chenrui333
• chore: bump platformio to 6.1.16 to support py3.13 build esphome#7590 by @​chenrui333
• [speaker, i2s_audio] I2S Speaker implementation using a ring buffer esphome#7605 by @​kahrendt (new-integration)
• Bump arduino-mlx90393 to 1.0.2 esphome#7618 by @​functionpointer
• [fix] ESP32-C6 BLE compile error esphome#7580 by @​rvalitov
• [axs15231] Touchscreen driver esphome#7592 by @​clydebarrow (new-integration)
• [lvgl] Roller and Dropdown enhancements; esphome#7608 by @​clydebarrow
• [code-quality] udp component esphome#7602 by @​tomaszduda23
• [lvgl] Revise code generation to allow early widget creation esphome#7611 by @​clydebarrow
• [lvgl] Allow esphome::Image in lambda to update image source directly esphome#7624 by @​guillempages
• Bump bme68x_bsec2 version to 1.8.2610 esphome#7626 by @​shvmm
• Update Pull request template esphome#7620 by @​jesserockz
• [lvgl] Defer display rotation reset until setup(). (Bugfix) esphome#7627 by @​clydebarrow
• [lvgl] light schema should require widget: not led: (Bugfix) esphome#7649 by @​clydebarrow (breaking-change)
• [image] Fix compile time problem with host image not using lvgl esphome#7654 by @​clydebarrow
• [lvgl] Fix rotation code for 90deg (Bugfix) esphome#7653 by @​clydebarrow
• [lvgl] Allow strings to be interpreted as integers (Bugfix) esphome#7652 by @​clydebarrow
• [rtttl] Add get_gain() esphome#7647 by @​edwardtfn
• feat(MQTT): Add subscribe QoS to discovery esphome#7648 by @​Rapsssito
• i2c_device esphome#7641 by @​gabest11 (new-integration)
• Bump actions/cache from 4.1.1 to 4.1.2 in /.github/actions/restore-python esphome#7659 by @​dependabot[bot]
• Bump actions/cache from 4.1.1 to 4.1.2 esphome#7660 by @​dependabot[bot]
• [speaker, i2s_audio] Support audio_dac component, mute actions, and improved logging esphome#7664 by @​kahrendt
• unified way how all platforms handle copy_files esphome#7614 by @​tomaszduda23
• updating ESP32 board definitions esphome#7650 by @​asolochek
• Support ignoring discovered devices from the dashboard esphome#7665 by @​jesserockz (new-feature)
• Bump esphome-dashboard to 2024102.0 esphome#7669 by @​jesserockz
• unified way how all platforms handle get_download_types esphome#7617 by @​tomaszduda23
• [media_player] Add new media player conditions esphome#7667 by @​kahrendt (new-feature)
• [code-quality] weikai.h esphome#7601 by @​tomaszduda23
• Bump actions/setup-python from 5.2.0 to 5.3.0 in /.github/actions/restore-python esphome#7671 by @​dependabot[bot]
• Bump actions/setup-python from 5.2.0 to 5.3.0 esphome#7670 by @​dependabot[bot]
• [image][online_image][animation] Fix transparency in RGB565 esphome#7631 by @​clydebarrow
• Add OpenTherm component (part 2.1: sensor platform) esphome#7529 by @​olegtarasov (new-platform)
• gp8403 : Add the possibility to use substitution for channel selection esphome#7681 by @​SeByDocKy
• [lvgl] Implement qrcode esphome#7623 by @​clydebarrow
• [bytebuffer] Rework ByteBuffer using templates esphome#7638 by @​clydebarrow
• [http_request] Always return defined server response status esphome#7689 by @​clydebarrow (breaking-change)
• [font] Fix failure with bitmap fonts esphome#7691 by @​clydebarrow
• [http_request] Add enum for status codes esphome#7690 by @​clydebarrow
• Support W5500 SPI-Ethernet polling mode if framework is supported esphome#7503 by @​slakichi
• Add asdf to gitignore (and dockerignore) esphome#7686 by @​jzucker2
• Add more prometheus metrics esphome#7683 by @​jzucker2
• Mopeka Pro Check improvement to allow user to configure the sensor reporting for lower quality readings esphome#7475 by @​spbrogan
• fix(WiFi): Fix strncpy missing NULL terminator [-Werror=stringop-truncation] esphome#7668 by @​Rapsssito
• let make new platform implementation in external components esphome#7615 by @​tomaszduda23
• remove use of delay esphome#7680 by @​ssieb
• fix build error esphome#7694 by @​tomaszduda23
• fix: [climate] Allow substitutions in visual.temperature_step.{target_temperature,current_temperature} esphome#7679 by @​hostcc
• Add in area and device to the prometheus labels esphome#7692 by @​jzucker2
• [http_request] Implement on_error trigger for requests esphome#7696 by @​clydebarrow
• Bump pypa/gh-action-pypi-publish from 1.10.3 to 1.11.0 esphome#7700 by @​dependabot[bot]
• [es8311] Add es8311 dac component esphome#7693 by @​kahrendt (new-integration)
• [sdl] Allow window to be resized. esphome#7698 by @​clydebarrow
• Add config for current temperature precision esphome#7699 by @​JasonN3
• [spi] Add mosi pin checks for displays esphome#7702 by @​clydebarrow
• [CI] Fix webserver defines to be present based on platform, not just framework esphome#7703 by @​jesserockz
• [touchscreen] Calibration fixes esphome#7704 by @​clydebarrow (breaking-change)
• [font] Add support for "glyphsets" esphome#7429 by @​paravoid
• [lvlg] fix tests esphome#7708 by @​clydebarrow
• [esp32_ble] Add disconnect as a virtual function to ESPBTClient esphome#7705 by @​jesserockz
• handle bad pin schemas esphome#7711 by @​ssieb
• datetime fix build_language_schema esphome#7710 by @​tomaszduda23
• [lvgl] Don't just throw key error if someone types a bad layout type esphome#7722 by @​jesserockz
• [spi_device] rename mode to spi_mode esphome#7724 by @​clydebarrow (breaking-change)
• feat(MQTT): Add enable, disable and enable_on_boot esphome#7716 by @​Rapsssito
• [lvgl] Allow multiple LVGL instances esphome#7712 by @​clydebarrow
• [fix] deprecated legacy driver tsens esphome#7658 by @​rvalitov
• [lvgl] Fix id config for the lvgl component (Bugfix) esphome#7731 by @​clydebarrow
• Bump pypa/gh-action-pypi-publish from 1.11.0 to 1.12.2 esphome#7730 by @​dependabot[bot]
• OTA: Fix IPv6 and multiple address support esphome#7414 by @​dwmw2
• Fix dashboard ip resolving esphome#7747 by @​jesserockz
• [docker] Bump curl, iputils-ping and libssl-dev esphome#7748 by @​jesserockz
• Remove the choice for MQTT logging if it is disabled esphome#7723 by @​solarkennedy
• [sensor] Make some values templatable esphome#7735 by @​clydebarrow
• [lvgl] Implement keypads esphome#7719 by @​clydebarrow
• [midea] Add temperature validation in do_follow_me method (bugfix) esphome#7736 by @​DjordjeMandic
• Add OpenTherm component (part 3: rest of the sensors) esphome#7676 by @​olegtarasov (new-integration)
• [i2s_audio] I2S speaker improvements esphome#7749 by @​kahrendt
• [opentherm] Message to string extend esphome#7755 by @​FreeBear-nc
• [sun] Implements is_above_horizon() esphome#7754 by @​edwardtfn
• [core] Ring buffer write functions use const pointer parameter esphome#7750 by @​kahrendt
• [Modbus Controller] Added on_online and on_offline automation esphome#7417 by @​0x3333
• Updated dfplayer logging to be more user-friendly esphome#7740 by @​solarkennedy
• Fix temperature and humidity for bme680 with bsec2 esphome#7728 by @​luar123
• [i2s_audio] Bugfix: Adjust I2S speaker setup priority esphome#7759 by @​kahrendt
• Update UNIT_VOLT_AMPS_REACTIVE = "var" (Currently 'VAR') esphome#7643 by @​Roving-Ronin (breaking-change)
• Fix reactive power unit of measurement from VAR to var esphome#7757 by @​felipecrs
• Disable bluetooth proxy during update esphome#7695 by @​jzucker2
• ld2420: fix typo in log message esphome#7758 by @​bfabio
• TuyaFan control should use oscillation_type esphome#7776 by @​pethans
• Bump esphome-dashboard to 2024111.0 esphome#7782 by @​jesserockz
• [http_request] Feed watchdog timeout around http request functions esphome#7786 by @​jesserockz
• Bump esphome-dashboard to 2024112.0 esphome#7787 by @​jesserockz

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>, please review it.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
  • @coderabbitai help me debug CodeRabbit configuration file.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (Invoked using PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai full review to do a full review from scratch and review all the files again.
• @coderabbitai summary to regenerate the summary of the PR.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai configuration to show the current CodeRabbit configuration for the repository.
• @coderabbitai help to get help.

Other keywords and placeholders

• Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
• Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
• Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.