Windows Auto Hotspot 🚀

Windows Auto Hotspot is a PowerShell script that automatically manages your PC's Wi-Fi hotspot. It enables the hotspot when an Ethernet cable is connected (including via USB adapters) and disables it when disconnected. Follow the steps below to configure and automate the process using Task Scheduler.

How Does It Work? 🤔

Windows Auto Hotspot automates the process of turning your PC into a Wi-Fi hotspot whenever an Ethernet cable is connected. The script runs in the background, activating the hotspot when a wired connection is detected, and disabling it when the cable is unplugged. This eliminates the need for manual management—it's all done automatically.

---

Why Ethernet? 🌐

This script works exclusively with Ethernet connections. It is designed for environments where your primary internet access is through a wired connection, ensuring seamless sharing via your PC’s Wi-Fi.

Perfect for Laptop Users 💻

Laptop users will find this script especially useful. If you prefer to close your laptop lid and still keep the hotspot running, you can adjust your system settings to ensure the laptop doesn't go into sleep mode while plugged into power. This allows the hotspot to continue operating even when the lid is closed, making it an ideal solution for keeping your devices connected without interruptions.

For example, you can configure your laptop to stay awake when connected to power, allowing you to use it as a permanent hotspot while keeping it out of the way—no need to keep the screen open or active.

Key Advantages 🔑

• Fully Automated: The script starts automatically with the system and activates the hotspot when an Ethernet cable is detected.
• Ethernet-Exclusive: It only works with Ethernet connections, perfect for homes and offices that rely on wired internet.
• Optimized for Laptops: You can close your laptop lid without putting it to sleep, allowing the hotspot to keep running while plugged into power.
• Continuous Monitoring: Runs silently in the background and adjusts the hotspot as needed.

Whether you're working in an Ethernet-only environment, need a reliable and automated hotspot solution for your laptop, or just want to ensure all your devices stay connected, Windows Auto Hotspot is the perfect solution.

---

Requirements ✅

• Windows 10 or higher.
• Administrator privileges to run the PowerShell script.
• A PC with an Ethernet adapter, either built-in or via USB Ethernet adapter, and a Wi-Fi adapter.

Step-by-Step Instructions 🖥️

1. Configure Your Wi-Fi Hotspot

Before using the script, you need to manually configure your Wi-Fi hotspot settings on Windows:

1. Open Hotspot Settings:

   • Go to Settings > Network & Internet > Mobile Hotspot.
   
   
   
   
   

2. Set the SSID and Password:

   • Choose your Network Name (SSID) and Password.
   
   
   
   
   

3. Select the Connection Type:

   • If your device supports it, select between 2.4GHz and 5GHz for your Wi-Fi hotspot.

4. Enable Internet Sharing:

   • Set Share my Internet connection to Wi-Fi.

Once your hotspot is configured, you can move on to the next steps.

2. Download and Place the Script

1. Download the Windows Auto Hotspot script from this repository.
2. Place the script in a directory of your choice. It is recommended to save it in your user's folder (e.g., C:\\Users\\YourUser\\Documents) or any easily accessible folder.

3. Set Up Task Scheduler

Now, let's automate the script using Task Scheduler:

1. Open Task Scheduler:

   • Search for Task Scheduler in the Windows Start menu and open it.
   
   
   
   
   

2. Create a New Task:

   • Click on Create Task in the right sidebar.
   • Name the task something like "Windows Auto Hotspot".
   • Check Run whether user is logged on or not and Do not store password.
   • Check Run with highest privileges.
   
   
   
   
   

4. Configure the Triggers

1. Create a Trigger:

   • Go to the Triggers tab and click New.
   • Set Begin the task to At startup.
   • Under Advanced settings, check Repeat task every 5 minutes, and set the duration to Indefinitely.
   • Make sure the Enabled box is checked.
   
   
   
   
   

5. Configure the Actions

1. Set Action to Start PowerShell:

   • Go to the Actions tab and click New.

   • Set Action to Start a program.

   • In the Program/script field, enter:

     powershell.exe

   • In the Add arguments field, enter:

     -ExecutionPolicy Bypass -File "C:\\path_to_script\\windows_auto_hotspot.ps1"

     Replace "C:\\path_to_script\\windows_auto_hotspot.ps1" with the actual path where you saved the script.

   
   
   
   
   

6. Configure Conditions and Settings

1. Conditions:

   • Uncheck everything in the Conditions tab (nothing should be enabled).
   
   
   
   
   

2. Settings:

   • In the Settings tab, check the following options:
     • Allow task to be run on demand.
     • Run task as soon as possible after a scheduled start is missed.
     • Do not start a new instance.
   
   
   
   
   

7. Done! 🎉

Your script is now set up to run at startup and will check to enable or disable the hotspot based only on the Ethernet connection status.

If you found this script helpful, feel free to ⭐ star the repository or fork it for your own customization!

---

License 📄

This project is licensed under the Apache License 2.0 - see the LICENSE file for details.