Skip to content

Commit

Permalink
batman-adv: Avoid infinite loop trying to resize local TT
Browse files Browse the repository at this point in the history
If the MTU of one of an attached interface becomes too small to transmit
the local translation table then it must be resized to fit inside all
fragments (when enabled) or a single packet.

But if the MTU becomes too low to transmit even the header + the VLAN
specific part then the resizing of the local TT will never succeed. This
can for example happen when the usable space is 110 bytes and 11 VLANs are
on top of batman-adv. In this case, at least 116 byte would be needed.
There will just be an endless spam of

   batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110)

in the log but the function will never finish. Problem here is that the
timeout will be halved all the time and will then stagnate at 0 and
therefore never be able to reduce the table even more.

There are other scenarios possible with a similar result. The number of
BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too
high to fit inside a packet. Such a scenario can therefore happen also with
only a single VLAN + 7 non-purgable addresses - requiring at least 120
bytes.

While this should be handled proactively when:

* interface with too low MTU is added
* VLAN is added
* non-purgeable local mac is added
* MTU of an attached interface is reduced
* fragmentation setting gets disabled (which most likely requires dropping
  attached interfaces)

not all of these scenarios can be prevented because batman-adv is only
consuming events without the the possibility to prevent these actions
(non-purgable MAC address added, MTU of an attached interface is reduced).
It is therefore necessary to also make sure that the code is able to handle
also the situations when there were already incompatible system
configuration are present.

Signed-off-by: Sven Eckelmann <[email protected]>
  • Loading branch information
ecsv committed Apr 5, 2024
1 parent 5a7cac9 commit 419a866
Show file tree
Hide file tree
Showing 2 changed files with 60 additions and 1 deletion.
2 changes: 1 addition & 1 deletion batman-adv/Makefile
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,7 @@ include $(TOPDIR)/rules.mk

PKG_NAME:=batman-adv
PKG_VERSION:=2023.1
PKG_RELEASE:=6
PKG_RELEASE:=7

PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
Expand Down
Original file line number Diff line number Diff line change
@@ -0,0 +1,59 @@
From: Sven Eckelmann <[email protected]>
Date: Mon, 12 Feb 2024 14:32:13 +0100
Subject: batman-adv: Avoid infinite loop trying to resize local TT

If the MTU of one of an attached interface becomes too small to transmit
the local translation table then it must be resized to fit inside all
fragments (when enabled) or a single packet.

But if the MTU becomes too low to transmit even the header + the VLAN
specific part then the resizing of the local TT will never succeed. This
can for example happen when the usable space is 110 bytes and 11 VLANs are
on top of batman-adv. In this case, at least 116 byte would be needed.
There will just be an endless spam of

batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110)

in the log but the function will never finish. Problem here is that the
timeout will be halved all the time and will then stagnate at 0 and
therefore never be able to reduce the table even more.

There are other scenarios possible with a similar result. The number of
BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too
high to fit inside a packet. Such a scenario can therefore happen also with
only a single VLAN + 7 non-purgable addresses - requiring at least 120
bytes.

While this should be handled proactively when:

* interface with too low MTU is added
* VLAN is added
* non-purgeable local mac is added
* MTU of an attached interface is reduced
* fragmentation setting gets disabled (which most likely requires dropping
attached interfaces)

not all of these scenarios can be prevented because batman-adv is only
consuming events without the the possibility to prevent these actions
(non-purgable MAC address added, MTU of an attached interface is reduced).
It is therefore necessary to also make sure that the code is able to handle
also the situations when there were already incompatible system
configuration are present.

Cc: [email protected]
Fixes: f7f2fe494388 ("batman-adv: limit local translation table max size")
Reported-by: [email protected]
Signed-off-by: Sven Eckelmann <[email protected]>
Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/05f6eadbbddc834669249ae204026c383445b571

--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -3948,7 +3948,7 @@ void batadv_tt_local_resize_to_mtu(struc

spin_lock_bh(&bat_priv->tt.commit_lock);

- while (true) {
+ while (timeout) {
table_size = batadv_tt_local_table_transmit_size(bat_priv);
if (packet_size_max >= table_size)
break;

0 comments on commit 419a866

Please sign in to comment.