Skip to content

Common build tasks for psake and Invoke-Build that build and test PowerShell modules

License

Notifications You must be signed in to change notification settings

psake/PowerShellBuild

Repository files navigation

PowerShellBuild

GitHub Actions PS Gallery License
GitHub Actions Status GitHub Actions Status PowerShell Gallery License

This project aims to provide common psake and Invoke-Build tasks for building, testing, and publishing PowerShell modules.

Using these shared tasks reduces the boilerplate scaffolding needed in most PowerShell module projects and help enforce a consistent module structure. This consistency ultimately helps the community in building high-quality PowerShell modules.

If using psake as your task runner, version 4.8.0 or greater is required to make use of shared tasks distributed in separate modules. To install psake 4.8.0 you can run:

Install-Module -Name psake -RequiredVersion 4.8.0 -Repository PSGallery

For Invoke-Build, see the how to dot source tasks using PowerShell aliases example.

Logo

Status - Work in progress

This project is a work in progress and may change significantly before reaching stability based on feedback from the community. Please do not base critical processes on this project until it has been further refined.

Tasks

PowerShellBuild is a PowerShell module that provides helper functions to handle the common build, test, and release steps typically found in PowerShell module projects. These steps are exposed as a set of psake tasks found in psakeFile.ps1 in the root of the module, and as PowerShell aliases which you can dot source if using Invoke-Build. In psake v4.8.0, a feature was added to reference shared psake tasks distributed within PowerShell modules. This allows a set of tasks to be versioned, distributed, and called by other projects.

Primary Tasks

These primary tasks are the main tasks you'll typically call as part of PowerShell module development.

Name Dependencies Description
Init none Initialize psake and task variables
Clean init Clean output directory
Build StageFiles, BuildHelp Clean and build module in output directory
Analyze Build Run PSScriptAnalyzer tests
Pester Build Run Pester tests
Test Analyze, Pester Run combined tests
Publish Test Publish module to defined PowerShell repository

Secondary Tasks

These secondary tasks are called as dependencies from the primary tasks but may also be called directly.

Name Dependencies Description
BuildHelp GenerateMarkdown, GenerateMAML Build all help files
StageFiles Clean Build module in output directory
GenerateMarkdown StageFiles Build markdown-based help
GenerateMAML GenerateMarkdown Build MAML help
GenerateUpdatableHelp BuildHelp Build updatable help cab

Task customization

The psake and Invoke-Build tasks can be customized by overriding the values contained in the $PSBPreference hashtable. defined in the psake file. These settings govern if certain tasks are executed or set default paths used to build and test the module. You can override these in either psake or Invoke-Build to match your environment.

Setting Default value Description
$PSBPreference.General.ProjectRoot $env:BHProjectPath Root directory for the project
$PSBPreference.General.SrcRootDir $env:BHPSModulePath Root directory for the module
$PSBPreference.General.ModuleName $env:BHProjectName The name of the module. This should match the basename of the PSD1 file
$PSBPreference.General.ModuleVersion \<computed> The version of the module
$PSBPreference.General.ModuleManifestPath $env:BHPSModuleManifest Path to the module manifest (PSD1)
$PSBPreference.Build.OutDir $projectRoot/Output Output directory when building the module
$PSBPreference.Build.Dependencies 'StageFiles, 'BuildHelp' Default task dependencies for the Build task
$PSBPreference.Build.ModuleOutDir $outDir/$moduleName/$moduleVersion For internal use only. Do not overwrite. Use '$PSBPreference.Build.OutDir' to set output directory
$PSBPreference.Build.CompileModule $false Controls whether to "compile" module into single PSM1 or not
$PSBPreference.Build.CompileDirectories @('Enum', 'Classes', 'Private', 'Public') List of directories to "compile" into monolithic PSM1. Only valid when $PSBPreference.Build.CompileModule is $true.
$PSBPreference.Build.CopyDirectories @() List of directories to copy "as-is" to built module
$PSBPreference.Build.CompileHeader <empty> String that appears at the top of your compiled PSM1 file
$PSBPreference.Build.CompileFooter <empty> String that appears at the bottom of your compiled PSM1 file
$PSBPreference.Build.CompileScriptHeader <empty> String that appears in your compiled PSM1 file before each added script
$PSBPreference.Build.CompileScriptFooter <empty> String that appears in your compiled PSM1 file after each added script
$PSBPreference.Build.Exclude <empty> Array of files (regular expressions) to exclude when building module
$PSBPreference.Test.Enabled $true Enable/disable Pester tests
$PSBPreference.Test.RootDir $projectRoot/tests Directory containing Pester tests
$PSBPreference.Test.OutputFile $null Output file path Pester will save test results to
$PSBPreference.Test.OutputFormat NUnitXml Test output format to use when saving Pester test results
$PSBPreference.Test.ScriptAnalysis.Enabled $true Enable/disable use of PSScriptAnalyzer to perform script analysis
$PSBPreference.Test.ScriptAnalysis.FailBuildOnSeverityLevel Error PSScriptAnalyzer threshold to fail the build on
$PSBPreference.Test.ScriptAnalysis.SettingsPath ./ScriptAnalyzerSettings.psd1 Path to the PSScriptAnalyzer settings file
$PSBPreference.Test.CodeCoverage.Enabled $false Enable/disable Pester code coverage reporting
$PSBPreference.Test.CodeCoverage.Threshold .75 Fail Pester code coverage test if below this threshold
$PSBPreference.Test.CodeCoverage.Files *.ps1, *.psm1 Files to perform code coverage analysis on
$PSBPreference.Test.CodeCoverage.OutputFile coverage.xml Output file path (relative to Pester test directory) where Pester will save code coverage results to
$PSBPreference.Test.CodeCoverage.OutputFileFormat $null Test output format to use when saving Pester code coverage results
$PSBPreference.Test.ImportModule $false Import module from output directory prior to running Pester tests
$PSBPreference.Help.UpdatableHelpOutDir $OutDir/UpdatableHelp Output directory to store update module help (CAB)
$PSBPreference.Help.DefaultLocale (Get-UICulture).Name Default locale used for help generation
$PSBPreference.Help.ConvertReadMeToAboutHelp $false Convert project readme into the module about file
$PSBPreference.Docs.RootDir $projectRoot/docs Directory PlatyPS markdown documentation will be saved to
$PSBPreference.Publish.PSRepository PSGallery PowerShell repository name to publish
$PSBPreference.Publish.PSRepositoryApiKey $env:PSGALLERY_API_KEY API key to authenticate to PowerShell repository with
$PSBPreference.Publish.PSRepositoryCredential $null Credential to authenticate to PowerShell repository with. Overrides $psRepositoryApiKey if defined

Examples

psake

The example below is a psake file you might use in your PowerShell module. When psake executes this file, it will recognize that tasks are being referenced from a separate module and automatically load them. You can run these tasks just as if they were included directly in your task file.

Notice that the task file contained in MyModule only references the Build task supplied from PowerShellBuild. When executed, the dependent tasks Init, Clear, and StageFiles also contained in PowerShellBuild are executed as well.

psakeBuild.ps1
properties {
    # These settings overwrite values supplied from the PowerShellBuild
    # module and govern how those tasks are executed
    $PSBPreference.Test.ScriptAnalysisEnabled = $false
    $PSBPreference.Test.CodeCoverage.Enabled  = $true
}

task default -depends Build

task Build -FromModule PowerShellBuild -Version '0.1.0'

Example

Invoke-Build

The example below is an Invoke-Build task file that imports the PowerShellBuild module which contains the shared tasks and then dot sources the Invoke-Build task files that are referenced by the PowerShell alias PowerShellBuild.IB.Tasks. Additionally, certain settings that control how the build tasks operate are overwritten after the tasks have been imported.

.build.ps1
Import-Module PowerShellBuild
. PowerShellBuild.IB.Tasks

# Overwrite build settings contained in PowerShellBuild
$PSBPreference.Test.ScriptAnalysisEnabled = $true
$PSBPreference.Test.CodeCoverage.Enabled  = $false

Example