This program allows you to centralize and distribute IP blacklists.
If you maintain a server on the Internet, it's very likely you encountered one or more brute force attacks. Not a problem, just install fail2ban. Done.
But if you're running multiple servers, each of them running their fail2ban instance, they'll all have different IP addresses in the ban list. Wouldn't it be nice to have a shared ban list across all your fail2ban instances? Or in case all your machines are behind a router or firewall you control yourself, wouldn't it be nice to drop malicious traffic at the edge of your network?
That's exactly what vallumd helps to achieve.
Vallumd connects to an MQTT broker, reads messages containing IP addresses, and adds or deletes those IP addresses to or from an ipset. Simple as that.
This means it is not useful on its own, but it makes vallumd very flexible. You can decide for yourself what kind of iptables rule you want to reference the ipset in. Integrating it with fail2ban is as simple as creating a new action that uses mosquitto_pub to send a message to your MQTT broker. And since there are MQTT libraries out there for most common languages, it shouldn't be too hard to integrate with your favorite IDS, IPS or Honeypot.
The name vallumd comes from the Latin word "vallum", which means wall. And that's what vallumd does: build a wall to protect your digital empire.
The nicest way to install any package, is by using your distribution's package management. However, since this project is very young, it has not been included in many distributions yet.
Make sure you have the EPEL repository enabled. On CentOS 8, the ipset-devel package is in the PowerTools repository, so you'll have to enable it.
sudo yum -y install cmake ipset-devel mosquitto-devel openssl-devel pkgconfig '@Development Tools'
sudo yum -y --enablerepo=PowerTools install cmake ipset-devel mosquitto-devel openssl-devel pkgconfig '@Development Tools'
You can now generate an RPM package with cpack:
git clone https://codeberg.org/stintel/vallumd.git
cd vallumd
cmake .
cpack -G RPM
sudo yum -y localinstall build/*.rpm
Tested on CentOS 7 and 8.
You can generate a DEB package with cpack:
sudo apt-get -y install build-essential cmake libipset-dev libmosquitto-dev libssl-dev pkg-config
git clone https://codeberg.org/stintel/vallumd.git
cd vallumd
cmake .
cpack -G DEB
sudo dpkg -i build/*.deb
Tested on Debian 9, 10 and Ubuntu 18.04, 20.04.
You can find a live ebuild for vallumd in my Gentoo overlay
If you're running an OpenWrt DD snapshot or LEDE, vallumd is available in the packages feed, and can be installed with opkg:
opkg update
opkg install vallumd
Manual installation is very easy. Requirements:
- cmake
- libipset
- libmosquitto
- libssl
Instructions:
git clone https://codeberg.org/stintel/vallumd.git
cd vallumd
cmake .
make
make install
To use vallumd, you need an MQTT broker, like Mosquitto. Depending on your setup, you can run it on the same host that runs vallumd, but that's no requirement.
The next thing you need is an IPset. To give you full control over the type of IPset and its options, vallumd will not create the IPset itself. You can choose between these IPset types:
- bitmap:ip
- bitmap:net
- hash:ip
- hash:net
IPset creation example:
ipset create blacklist hash:ip timeout 3600
Now you can start vallumd. The following command line options exist:
-h: MQTT host to connect to
-p: MQTT port to connect to (1883)
-u: MQTT username
-P: MQTT password
-t: MQTT topic and IPset name
-V: print version number and exit
-c: path to CA file
-T: use TLS
The host and topic options are required, the others are optional (default value). It is possible to specify multiple topics.
Starting vallumd:
vallumd -h 192.168.0.1 -t blacklist
This will listen for messages on the MQTT broker at 192.168.0.1, in the blacklist topic, and when a message is received, the IP address in the message will be added to or remove from the IPset named blacklist.
So now we have everything in place to start adding IPs to the blacklist. All we have to do is configure our IDS, IPS or Honeypot to send malicious IP addresses to our MQTT broker.
For fail2ban, this could be done with the Mosquitto client mosquitto_pub.
Create a new action in /etc/fail2ban/action.d/vallumd.conf:
[Definition]
actionban = mosquitto_pub -h 192.168.0.1 -q 2 -t blacklist/add -m <ip>
actionunban = mosquitto_pub -h 192.168.0.1 -q 2 -t blacklist/del -m <ip>
And configure your fail2ban jails to use the vallumd action.
The packages generated with CPack support OpenRC, Upstart and systemd. Service configuration files are where you would expect them in your distro:
- CentOS/RedHat: /etc/sysconfig/vallumd
- Debian/Ubuntu: /etc/default/vallumd
- Gentoo: /etc/conf.d/vallumd
- OpenWrt/LEDE: /etc/config/vallumd
After editing the file relevant for your distribution, start the vallumd service just like you would start any other service on your system.
Vallumd uses syslog(3) for logging.
- Join the #vallumd IRC channel on irc.oftc.net